THIS PRODUCT MUST ONLY BE INSTALLED OR SERVICED BY QUALIFIED PERSONNEL. Refer to Commonwealth, State, Territory and local legislation, regulations, codes, installation & operation manuals, before the installation, maintenance and/or service of this product. KEEP THIS OPERATION MANUAL FOR FUTURE REFERENCE FUJITSU GENERAL LIMITED P/N 9332428018...
CONTENTS SAFETY PRECAUTIONS ........2 SWING OPERATION ........... 12 FEATURES AND FUNCTIONS ......3 ECONOMY OPERATION ........12 NAME OF PARTS ..........4 MANUAL AUTO OPERATION ......13 PREPARATION ............ 6 OPERATING TIPS ..........13 OPERATION ............7 CLEANING AND CARE ........14 TIMER OPERATION ..........
SAFETY PRECAUTIONS ● Do not apply any heavy pressure to radiator ¿ ns. CAUTION ● Operate only with air ¿ lters installed. ● Do not block or cover the intake grille and outlet port. ● Ensure that any electronic equipment is at least 3.3ft (1m) away from either the indoor or outdoor units. ●...
NAME OF PARTS Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 To facilitate explanation, the accompanying illustra- tion has been drawn to show all possible indicators; in actual operation, however, the display will only show those indicators appropriate to the current operation.
NAME OF PARTS Fig. 1 Indoor Unit Fig. 5 Remote Controller 1 Operating Control Panel (Fig. 2) D Signal Transmitter 2 MANUAL AUTO button E MODE button ● When the MANUAL AUTO button is F ECONOMY button pressed in for more than 10 seconds, the G SLEEP button forced cooling operation will start.
PREPARATION CAUTION Turn on the Power ● Take care to prevent infants from acciden- tally swallowing batteries. Turn on the circuit breaker ● When not using the Remote Controller for an extended period, remove the batteries to avoid possible leakage and damage to the Load Batteries (AAA/R03/LR03 ×...
OPERATION To Select Mode Operation Press the START/STOP button (Fig.5 J ). The indoor unit’s OPERATION Indicator Lamp (green) (Fig. 3 5) will light. The air conditioner will start operating. Press the MODE button (Fig.5 E ) to select the de- sired mode.
OPERATION About AUTO CHANGEOVER Operation ● When AUTO CHANGEOVER operation ¿ rst selected, the fan will operate AUTO: at very low speed for about a few minutes, during which time the indoor unit detects the room conditions and selects the proper mode. Cooling mode or Dry mode De¿...
TIMER OPERATION Before using the timer function, be sure that the Remote Controller is set to the correct current time (☞ P. 5). To Use the ON timer or OFF timer To Cancel the Timer Press the START/STOP button (Fig. 5 J ) Use the TIMER button to select “CANCEL”.
SLEEP TIMER OPERATION Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operation is stopped. To Use the SLEEP Timer To Cancel the Timer: While the air conditioner is operating or stopped, press the Use the TIMER MODE button to select “CAN- SLEEP button (Fig.
ADJUSTING THE DIRECTION OF AIR CIRCULATION Vertical (up-down) direction of airÀ ow is adjusted by pressing the Remote Controller's SET button. Horizontal (right-left) airÀ ow direc- tion is adjusted manually, by moving the AirÀ ow Direction Louvers. Whenever making horizontal airÀ ow adjustments, start air conditioner operation and be sure that the vertical air direction louvers are stopped.
SWING OPERATION Begin air conditioner operation before performing this procedure. To select SWING Operation Press the SWING button (Fig. 5 L ). The SWING Display (Fig. 6 X ) will light. In this mode, the AirÀ ow Direction Louvers will swing automatically to direct the airÀ ow both up and down.
MANUAL AUTO OPERATION Use the MANUAL AUTO operation in the event the Remote Controller is lost or otherwise unavailable. How To Use the Main Unit Controls ● When the air conditioner is operated by the controls on the MANUAL AUTO Press the MANUAL AUTO button (Fig.
CLEANING AND CARE ● Before cleaning the indoor unit, be sure to turn it off and disconnect the Power Supply Cord. CAUTION ● Be sure the Intake Grille (Fig. 1 8 ) is installed securely. ● When removing or replacing the air ¿ lters, be sure not to touch the heat exchanger, as personal injury may result.
CLEANING AND CARE (2) Install in the same way as for installation of the air Air Cleaning Filter Installation cleaning ¿ lter set. 4. Install the 2 Air filters and close the 1. Open the Intake Grille and remove the Air Intake Grille.
TROUBLESHOOTING In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the electrical WARNING breaker and consult authorized service personnel. Merely turning off the unit’s power switch will not completely disconnect the unit from the power source. Always be sure to turn off the electrical breaker to ensure that power is completely off.