JVC RX-7030VBK Instructions Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. Receiver
  5. RX-7030VBK
  6. Instructions manual

JVC RX-7030VBK Instructions Manual

Audio/video control receiver
Hide thumbs Also See for RX-7030VBK:
Table of Contents

Quick Links

See also: Service Manual , Instruction Manual
JVC
AUDIO/VIDEO
CONTROL RECEIVER
RX-8030VBK
RX-7030VB K/RX-7032VSL
_BW
_urw
Ir_lvBlk
/fl/_////
DB_
DIGITAL.
EX
_"=]1 = Ko] II[e][_l
E ! III
_-_,_,_
(For RX-803OVBK)
rr
__'__
(For RX-8030VBK)
a
a
o_o
NSTRUCTIONS
For Customer Use:
Enter below the Model No. and Seria+
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information
for future reference.
Model No.
Serial No.
LVT1007-001A[J]
Table of Contents
loading

Related Manuals for JVC RX-7030VBK

Summary of Contents for JVC RX-7030VBK

  • Page 1 AUDIO/VIDEO CONTROL RECEIVER RX-8030VBK RX-7030VB K/RX-7032VSL _urw Ir_lvBlk /fl/_//// DIGITAL. _-_,_,_ (For RX-803OVBK) _"=]1 = Ko] II[e][_l E ! III __'__ (For RX-8030VBK) NSTRUCTIONS For Customer Use: Enter below the Model No. and Seria+ No. which are located either on the rear, bottom or side of the cabinet.
  • Page 2 Warnings, Cautions and Others/ Mises en garde, precautions et indications diverses For U.S.A This equipment has been tested and found to comply with the limits for a Ctass B digitat device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against CAUTION:...
  • Page 3 Remote Control System ..Receiving Radio Broadcasts AV COMPU LINK Remote Control System ..42 ......Operating JVC's Audio/Video Components ... 44 Tuning in to Stations Manually ..........Using Preset Tuning ..............Operaling Audio Components ..........Selecting the FM Reception Mode ...........
  • Page 4 DSR you can enjoy a natural surround sound through the headphones. COMPU LINK/AV COMPU LINK remote control systems These COMPU LINK remote control systems allow you to operate other JVC's audio/video components from this receiver.
  • Page 5 Parts Identification Only for RX-8030VBK: Display window /71 SOUND button (22, 32, 33) /g] CATV/DBS CONTROL button (47) • When the rcmole operation mode changes, it is shown on /91 TV/VIDEO button (46, 47) this display. /10 ° For Rx-g030VBK: CONTROL button (44 - 46) •...
  • Page 6 Front Panel RX-8030VBK RX-7030VBK/RX-7032VSL Inside the front door How to open the front door Press down on PUSH OPEN.

  • Page 7: Table Of Contents

    Front Panel [f_ 0)/I STANDBY/ON button and STANDBY lamp (17) lill EX/ES button (37) [2/ • SPEAKERS ON/OFF 1 button (19) 112/ • INPUT ANALOG button (20) • SPEAKERS ON/OFF 2 button (19) • INPUT ATT button (20) 13/ • SURROUND button (37) 1131MIDNIGHT MODE...
  • Page 9 Rear Panel RX-703OVBK/RX-7032VSL RX-BO3OVBK DIGITAL IN terminals (16) DIGITAL IN terminals (16) • Coaxial: DIGITAL I (DVD) • Coaxial: DIGITAL I (DVD) • Oplical: DIGITAL 2 (CD), DIGITAL 3 (TV), • Optical: DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR) DIGITAL 4 (CDR) 12/ AUDIO...

  • Page 10: Connecting Fm/Am Antennas

    Getting Started This section explains how to connect audio/video components and speakers to the receiver, and how to connect power supply, If the remote control cannot transmit signals or operate the receiver correctly, replace the baneries. Use two R6P(SUM-3)/AA(I 5F) type dry-cell baneries.
  • Page 11 Antenna Connections Basic connecting procedure Twist and remove the insulation Turn the loop until you have the the end of each speaker signal cable best reception. (not supplied). Open the speaker terminal. Snap the tabs on the loop into the slols RX-7030VBK/RX-7032VSL of 1he base to assemble the AM loop.
  • Page 12 • Rein" terminals of RX-8030VBK are used for explanation. Front speakers 1 Front speakers 2 Right Left Right Left Center speaker Surround back speakers* Right / Left RIGHT LEFT _TER SURROUND _Q( SPEAKERS • FRONT SPEAKERS IMPORTANT: * When using only one After connecting tile speakers, set the speaker installation surround back speaker, connect the (_ cord to the...

  • Page 13: Connecting Audio/Video Components

    Enhancing your audio system mOnly for RX-8030VBK When connecting individual components, refer also to the manuals _u can use this receiver _ the p_-_plifier (control amplifier) supplied with them. when you connect power amplifie_ to the PREOUT jacks on the rein"using cables with RCA pin plugs (n_ supplied).
  • Page 14 CD player CD recorder To listen to the sound after connection, press CD. "[b listen to the sound after connection, press CDR (for RX-8030VBK) or TAPE/CDR (for RX-7030VBK]RX-7032VSL). ForRX-803OVBK RX-8030VBK RX-7030VBK/RX-7032VSL CD player RX-8030VBK CD recorder output Cassette deck "Ib listen to the sound after connection, press TAPE/MD (for RX- 8030VBK)
  • Page 15 CD recorder. When connecting an MD recorder Io 1he TAPE/ frequently. CDR jacks, see page 12. • Though your MD recorder is one of JVC products with the COMPU LINK remote control system, you cannot use the COMPU LINK remote...
  • Page 16 VCR(s) TV and/or DBStuner "[b listen to the sound after connection, press TV SOUND/DBS "Ib listen to the sound after connection, press VCR I or VCR 2 (for RX-8030VBK) or VCR (for RX-7030VBK/RX-7032VSL). TV/DBS on the remote control). For RX-803OVBK You can connect two VCRs--one 1o the VCR l jacks and the other Io the VCR 2 jacks.
  • Page 17 DVD player • When you connect a DVD player with its analog discrete • When you connect a DVD player with stereo output jacks: output (5.1-channel reproduction)jacks: To listen to the sound after connection, press DVD. To listen to the sound after connection, press DVD MULTI.

  • Page 18: Connecting The Power Cord

    • Digital Connections Digital outputterminal This receiver is equipped with four DIGITAL IN terminals--one You can connect any digital components which have an optical digital coaxial lerminal and three digital oplical terminals--and digital input lerminal. DIGITAL OUT (oplical) terminal on the rear. •...
  • Page 19 Basic Operations The following operations are commonly used when you play any sound sources. io ooo ..o©: © _====2 Press one of the source selection buttons. • The selected source name and the previously selected Surround/ Turn on the power. DSP mode also appear on the display.
  • Page 20 Speaker and signal indicators on the display Selecting different sources for picture sound By checking the following indicators, you can e_ily confirm which speakers you are activating and which signals m'e coming into this While watching pictures from a video source, you can listen to receiver.

  • Page 21: Speakers On/Off 1

    When you have connected two pairs of the front speakers, you can select which to use. You can cancel the subwoofer sound even though you have connecled a subwoofer and have set "SUB WOOFER" m "YES" (see page 27). This is useful when enjoying surround sound at night.

  • Page 22: Input Analog

    2. Press INPUT DIGITAL (or ANALOG/DIGITAL [_'-_'_j [',][_ u_,_:_j_] INPUT on the remote control) to select "DGTL AUTO." You can enjoy a powerful sound at night using the Midnight Mode. The DIGITALAUTO indicator up on the lights display. [][][] i", i i r'_ .'.'l I"I ;l ..

  • Page 23: Turning Analog Direct On/Off

    I _v_ t_ _'_ l _ L'_II __"_!IT_ I 1. Press TAPED. • Make sure "TAPE" appears on the display. JVC's CC (Compensalive Compression) Converter eliminates jilter and ripples, achieving a drastic reduction in digital distortion by Press and hold TAPE/MD until...

  • Page 24: Sleep

    Using the Sleep Timer, you can fall asleep while listening to music. When the shut-off time comes, the receiver turns off aWomatically. Press SLEEP repeatedly. The SLEEP indicator lights up on the display, and the shut-off time BassReinf°rcing the _! changes in 10 minutes inlervals: F IO .-- 20 .-- 30 .-- 40.-- 50 .-,- 60 .-- 70 .-- 80 .-- 90 --I / 0 (Canceled) ,...

  • Page 25: Memory

    Receiving Radio Broadcasts You can browse through all the stations or use the preset function to go immediately to a particular station, 1O=o@8o L=======J 1. Press FM or AM to select the band. Once a station is assigned to a channel number, the station can be The last received...

  • Page 26: Auto Muting

    To tune in a preset station On the h'ont panel: [O©Oo o = © I_© °o = When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast. 1.
  • Page 27 Basic Settings Some of #he foflowing se_ings are required after connecting and positioning your speakers while _here will make operations eaaien You can use QUICK SPEAKER SETUP _ easily set up your speaker configuredon, 3. Press in MULTI (PUSH SET). "ROOM SIZE'.)"...
  • Page 28 Speakers [chennelsl number end the size You can find how each of the speaker size is defined accenting to the number of connected speakers (speaker channel (CH) number) On the folIowing pages, you can 'adjust the following items: you select. In the following tables, "L"...
  • Page 29 : shows the initial setting in the following tables. 3b obtain the best tx_ssible surround effect from the Sttrround and DSP modes, register the setting about the speaker arrangement at'toe all connections _re completed. L====A L====d - If you have used Quick Speakvr Setup on page 25, this set_ng is not required.

  • Page 30: Main

    Setting Speaker Distance 'l_e _anee from your listening peint _ the speak_ is another You can adjust subw_)fer and bass sounds precisely according to impe_ant element to obtain the best pessthle sound of the Surround your preference. and DSP modes, Set the distance from your listeningpoint to the Subwoofer WFR OUTPUT •...
  • Page 31 • Low freauencv affect attenuatet_-LFE ATTENUATE Setting Digital Input Terminals If the bass sound is dial€tad while p]aying b_tcksoftware When you u_ the digital input terminus, regist_ which components encoded with D(flby Digital or [)TS, set the LP:E level to you have connected to the digital inpa tc_in als, e]iminate disto_ion, Diaital coaxial _pminaI_DGTL...
  • Page 32 For RX-7030V BKiRX-7032VSI,: Memorizing the Volume Level for Each Source As you set the components connected to the digital coaxial 3!iis unit memorizes some settings separately ferr each sottrce, terminal (1.)IGFIAL 1N 1), the optical terminals (DIGFFAL IN 2 In addition, you can store the volume lcvd t'c_"each source with the - 4) wilI be automatically fixed m connect the components listed other"memcrrized sethngs--One 3buch Operation,...
  • Page 33 Adjusting Sound You can make ssund adjustment to your preference silver csmpfedng basic se_ing. On the following pages, you can adjust the items listed below: • You can adjt_st only the iIems applicable m the currenI sound mode, • lr An_og IFlreel is in u_, yau cannat make any _und adjuslments.
  • Page 34 Adjusting the Speaker Output Levels Adjusting Equalizatian Patterns You can adjust the equalization patterns to your IVrC fercnee, You can adj_lst the s_ak_ output levels, l'he test tone comes out of • Once you have made adjustment iI is memudzed far each sut_rce. each speaker except subwoofer...
  • Page 35 l!_djusting Sound Parameters for the You can also use the remote control f{yradjusting the speakvr Surround and OSP Modes output level. You can _ust the Surround and DSP sound par_aeters _ yo_r When using the remote control, you can make an adj t_stme_t preference.
  • Page 36 Using the Surround Modes This unit activates a varie_ of SurPound modes autemadcaltg The basic settings and adjus##ents stored (see pages 25 te 33] a_e appfied. In a movie theator, many speakers are located on tbe walls to Dolby Digital repr,_uce impressive rim]d-surround sounds, reaching you from all Dolby Digital is a digital signal compression method, developed disect_ons,...

  • Page 37: Features

    - If the sur_tmd speake_ nod center speaker are set to channel m DI'S Digital St_rround hA-channel, By using a matrix "NONE" in the speaker setting, JVC's original 3D-PHONIC enc_mgldacc_mg method, an a_dit_on al "sttrmund back" channel Wocessing (which has been developed...
  • Page 38 Av_lable Surround modes vary depending on the speaker sattings and the incoming sign,s. The table below shows the rel_on of the S_und modes and the incoming sigmfls (wkh the strrreund back speak_rrs and EX/ES satxing). • The numbers inside the parentheses following the incoming algnaI type indicate the number of the front ch_mnels and that of the surround channels.

  • Page 39: Surround

    • Activating the Surround Modes Available Surround modes vary depending on the spe_er settings and the incoming sigmfls, (gee page 36.) Activating one of the Surrotmd modes for a sotwee automatically recalls the memaF_,_l settings and adjustments (see pages 2'J to 33.) 1.

  • Page 40: D-Phonic

    "NONI_7' in the speaker setllng, "3D H PHONE" appears on the di@ay and the DSP and JVC's original 3D-PHONIC pr,*xzcsalng (which has been HEADPHONE indicatc_rs also light up, developed m create the sttrround effect _rough the front speakers only) is used.
  • Page 41 ALL Channel S_ereo mode 'l%is mode can rewoduce a larg_ stereo sound field using _ _e connected (and activated) speakers, This mode eamtot be t_sed Activating one of the DSP modes ['ora sam'ee automatically withaut aetivatlng the surrotmd speakers. recalls the memorized settings and adjt_stments (see pages 25 to •...

  • Page 42: Multi

    Using the DVD MULTI Playback Mode This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD player. ConnectJon diaaram _©o RX-803OVBK c_c_ I c_C_oooooo RX-7030VBKJRX-7032VSL 1. Press DVD MUEI'I so that "DVD MUErI"...
  • Page 43 Automatic Source Selection 'lb ase this remote control system, you need to connect JVC's audio components t_rough the COMPU L1NK (SYNCHItO) jacks (see When you Fsess the play (1_) button on a connected component or below) in addition m the connacdons using cables with RCA Nn on its own remote control, the receiver aumm_icMly rams on and plugs (see pages 12 and 13).
  • Page 44 AV COMPU LINK-1II which adds a tbncfion to the Ivrevioas version in c_rdezto operate JVC's video components through the video components terminaIs. 3b asc this remote control system, connect the video components you want to operate, t'ollowing the diagrams below and the procedure on the next page.
  • Page 45 On_-Touah Dill) Play 1. if you have already plugged your VCR, player, TV and this receiver into the AC outlets, Simply by starting playback on the D'vn.) player, you can e@_y the unplug their AC power cords first. DVD playback without set_ag other switches manually. * V_qlenthe DVD player is connected through the analog input jacks on this receiver (and analog input is selected), the receiver 2.
  • Page 46 You can aIways peffoml the fullowing oparadons: IMPORTANT: FMiAM: Alternate between EM and AM. lb operate JVC's audio components using the supplied remote control: After pressing FM/AM, you can perfc_ma the t'olIowing operations • You need to connect JVC's audio components thr,_)ugbthe a tl.lner_...
  • Page 47 Fur RX-8030V BK: For RX-8030VBK: After pressing CDR (c¢ selecting "CDR" by Aftor selecting "CDDSC" by Wesaing CONTROL repeatedly, you pressing CONTROL repeatedly), you can poff_ml the following can porf_ml the following operations on a CD changer: operations on a CD rccceder: Fur RX-Tll31lV BKiRX-7032VSL: For RX-7030VBKiRX-7032VSL: After pressing IAPE/CDR/_"...
  • Page 48 COMPU LINK jacks (see page 42) in addition m the connections operations on aVCR: using canes with RCA pin plugs (see pages 14 and 15), • Seam JVC's VCRs can accept two types of the control aignais-- For RX-7030VBK/RX-7032VSL: A:ffor pressing VCR _o'_" VCR remote c{xte "._i' and '*B?' Before using this remote control, make...
  • Page 49 Operating Other Manufacturers' Video Equipment-- This rems_ control supplied with the r_eeiver can transmit control signals for other manufacturers' TV& CATV converters, DBS tuners, VCRs and DVD players. V_en operating the ut_cr manufacturers' cumponents, refer also to To change the transmittable signals for the n_muals supplied with them.
  • Page 50 To change the transmittable signals for To change the transmittable signals for operating another manufacturer's operating another manufacturer's DVD player 1. Press and holdAUDIO _11. 1. Press and hold VCR 1 _11(for RX-8030VBK) VCR Oil (for RX-7030VBK/RX-7032VSL). Press DVD. 2. lh_ss VCR 1 (for RX-8030VBK) or VCR (for RX- For RX-8030VBK: _'CALL"...
  • Page 51 Far TV Far VCR Manufaeturer Mamffae£arer Codes Codes M_uracturer Codes Quelle 00% 02, 13, 52,53,54,55, 00% 26, 27, 28, 29, 58 14, 47, 74 56,57,58,59, Aiwa 01,02 Akai 01,02 60, 61,62, 63, Bell & Howell Blaupunkt 03, 04 64,65,66,67 Blaupunkt 04, 05 Fisher RCAi...
  • Page 52 Troubleshooting Use this chart to help you salve daily aperstisnal problems, if ther_ is any problem you cannat solve, contact your JVCb service center. PROBLEM POSSIBLE CAUSE SOLUTION 'l_e dlsp]ay does riot light up, Tge power cord is nc_tplggged N_g the power cord into an AC outlet. No sound from speakers, Speaker signal cables are not commcteth Check speaker wMng and recomlect...

  • Page 53: Specifications

    Specifications RX-803OVBK Video Video Input Sensitivity/Impedance Output Power Composite video: At Slereo operation DVD IN, VCR I IN, VCR 2 IN, TV SOUND/DBS IN, VIDEO: Front ch: 130 W per channel, min. RMS, driven into g _, 1 V(p-p)/75 20 ttz to 20 kltz, with no more than 0.08% S-video:...
  • Page 54 RX-7030VBK/RX-7032VSL Equalization (5 bands): 63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz (-+8 dB) Output Power Bass boost: +6 dB -+1.0 dB at 100 Hz At Slereo operalion Front ch: 110 W per channel, min. RMS, driven into g _, Video 20 FIz to 20 kHz, with no more than 0.08%...
  • Page 55 Warranty Period. All products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered on an in-home basis.
  • Page 56 Authorized Service Centers JVC ° QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase,please read the instruction booklet before operating the unit.In the event that repairs are necessary,...
  • Page 57 < VICTOR COMPANY OF JAPAN, UMITED "_EN © 2003 VICTOR COMPANY OF JAPAN, LIMITED 0203NHMMDWJEI_...

This manual is also suitable for:

Rx-7032vslRx-8030vbk

Table of Contents