Table of Contents
DAB RECEIVER
MODEL
FV-DB2E
OPERATION MANUAL
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
The stylized mark 'DAB Digital Radio' is a trademark of Digital One
Limited used under licence, and the stylized 'R' mark is a registered
trademark of Digital One Limited. ™ & © 2003.
05/4/21
FVDB2E_UK_FRONT.fm
1
FV-DB2E TINSEA048SJZZ
TINSEA048SJZZ
Table of Contents
Related Manuals for Sharp FV-DB2E
Summary of Contents for Sharp FV-DB2E
- Page 1 FV-DB2E TINSEA048SJZZ Thank you for purchasing this SHARP product. DAB RECEIVER To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MODEL FV-DB2E OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www.sharp.co.uk/customersupport.
- Page 2 Sharp repair centre or contact electrical and electronic equipment. Following the implementation by member states, private the dealer or supplier from whom it was purchased.
-
Page 3: Table Of Contents
Special notes Contents FV-DB2E WARNINGS Page ! The supplied AC adaptor contains no user serviceable parts. " General Information Never remove covers unless qualified to do so. It contains dan- Precautions ......... 4 gerous voltages, always remove the mains plug from the main Controls and indicators . -
Page 4: Precautions
! Do not use an external power supply, other than the 9 V DC sup- moderate when listening to music. plied with this unit as it may be damaged. ! SHARP is not responsible for damage due to improper use. Refer all servicing to a SHARP authorised service centre. 05/4/21 FVDB2E_UK.fm... -
Page 5: Controls And Indicators
31. DC 9 V Input Socket ....... . 6 , (UM/SUM-3,R6 or "AA" CELL) x 2 (MEMORY) FREQUENCY RANGE : FM 87.5 108 MHz 240 MHz SERIAL NO. SHARP CORPORATION 05/4/21 FVDB2E_UK.fm TINSEA048SJZZ... -
Page 6: Power Source
Power source FV-DB2E " Inserting memory batteries " Using with the main batteries Memory batteries maintain the clock setting and preset stations for When the unit is powered by the main batteries, make sure to install the tuner. memory batteries. Otherwise preset stations, the clock setting and Failure to install the batteries correctly will cause loss of memory DAB setting will be all lost when the main batteries run out. -
Page 7: General Control
General control FV-DB2E " Adjusting the volume Move the operation lever toward VOL UP or VOL DOWN to increase or decrease the volume..39 40 " Adjusting the bass Press the SOUND button to select "Bass". Within 5 seconds, move the operation lever toward VOL UP or VOL DOWN to adjust the bass. -
Page 8: Changing The Display Brightness
Changing the display brightness Listening to the DAB FV-DB2E " About DAB (Digital Audio Broadcasting) Press the MENU button repeatedly to Digital Audio Broadcasting is a digital transmission system where select "Set Dimmer". audio signals are converted to digital signals for broadcasting. DAB is broadcast as a group of data called multiplex (ensemble) Within 30 seconds, press the ENTER which may contain one or more stations (services). -
Page 9: Auto Tune
FV-DB2E " Auto tune " Retuning the unit (Auto tune) When turned on for the first time, the unit scans radio stations You can retune the radio when you move the unit to other areas or automatically to create a station list. add multiplex channels to the station list. -
Page 10: Manual Tune
Listening to the DAB (continued) FV-DB2E " Selecting a station in the station list " Manual tune Once a DAB station is received, you can select stations in the sta- You can manually store stations which Auto tune cannot find. If tion list. - Page 11 FV-DB2E " Changing the station order " Adjusting the DRC value You can change the order of stations in the station list. When the volume is low, adjust the DRC (Dynamic Range Control) value to make the sound more audible (may not available for some Press the BAND button until "DAB"...
-
Page 12: Listening To Dab Stations In The Time Shift Mode
Listening to DAB stations in the time shift mode FV-DB2E " Rewind in the time shift mode Use these functions when you are missing your favourite music for answering calls, etc. Received data is stored in memory, and you can listen to the music and view the DLS (Dynamic Label Segment) Whilst receiving a DAB station, press the TIME SHIFT but- from the desired position afterwards. - Page 13 FV-DB2E " Pause in the time shift mode " Hold in the time shift mode Whilst receiving a DAB station, press Whilst receiving a DAB station, press the TIME SHIFT button to enter the time the TIME SHIFT button to enter the time shift mode.
-
Page 14: Changing The Information Display
Changing the information display FV-DB2E You can switch information in the lower part of display. Press the INFO button. Each time the button is pressed, the information display changes in the following order. When "Not available" appears, the INFO button does not allow you to change the display. [Scrolling text] [Programme type] [Multiplex name]... -
Page 15: Listening To The Fm
Listening to the FM FV-DB2E Move the operation lever toward TUNING UP or TUNING DOWN to tune in to the desired station. Manual tuning: Move the operation lever as many times as required to tune in to the desired station. Auto tuning: Hold the operation lever is down for 2 seconds or more, scan- ning will start automatically and the tuner will stop at the first re-... -
Page 16: Storing Stations
Storing stations FV-DB2E Hold down the PRESET button (1 - 5) for 2 seconds or more to store the station in memory. Repeat steps 1 - 3 to set other stations, or to change a pre- set station. When a new station is stored in memory, the station previously memorised will be erased. -
Page 17: Kitchen Timer Operation
Kitchen timer operation FV-DB2E The alarm sounds after the specified time elapses. Press the K-TIMER button repeatedly to select the desired time. ! You can change time between 1 and 60 minutes. By 1 minute By 5 minutes By 15 minutes ! To change time by 1 minute between 1 and 60 minutes, move the operation le- By 1 minute... -
Page 18: Alarm Operation
Alarm operation FV-DB2E At the set time, the alarm sounds or the radio turns on. Press the CLOCK button repeatedly to This unit has 2 types of alarm functions: "1-time alarm" and "daily select "Set alarm ok?", then press the alarm". -
Page 19: Alarm Operation
FV-DB2E To cancel the alarm setting: Press the ON/STAND-BY button to the Press the CLOCK button until "Alarm off ok?" appears on the dis- stand-by mode. play, then press the ENTER button. ! When you set the unit to the stand-by To reset or change the alarm setting: mode, "... -
Page 20: Sleep Operation
Sleep operation FV-DB2E When the set time elapses, the unit turns off automatically. To cancel the sleep setting: Press the ON/STAND-BY button whilst "SLEEP" is indicated. Before setting sleep: To cancel the sleep operation without setting the unit to the stand-by For the sleep operation, connect the AC adaptor to the unit. -
Page 21: Enhancing Your System
Enhancing your system FV-DB2E Turn off all other equipment before making this connection. Stereo system, etc. Headphones To audio input sockets Audio cable (commercially available) " Connecting to a stereo system, etc. " Headphones ! Before plugging in or unplugging the headphones, reduce the vol- You can enjoy the sound through a stereo system by connecting to the unit with an audio cable. -
Page 22: Troubleshooting Chart
If something is wrong with this product, check the following before (mechanical shock, excessive static electricity, abnormal supply calling your authorised SHARP dealer or service centre. voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. -
Page 23: Maintenance
Specifications FV-DB2E " Cleaning the cabinet As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product Periodically wipe the cabinet with a soft cloth and a diluted soap improvement without prior notice. The performance specification fig- solution, then with a dry cloth. -
Page 24: Terms Of Guarantee
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed Service Facility within one year from the date this product was purchased. Proof of purchase must be provided.