Fujitsu 560H SERIES Specifications

Memory card connectors (pcmcia conformable)

Quick Links

MEMORY CARD CONNECTORS
(PCMCIA CONFORMABLE)
560H SERIES
FEATURES
• The connectors conform to the Japan Electronic Industry
Development Association (JEIDA) and Personal
Computer Memory Card International Association
(PCMCIA) standards Ver. 4.
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).
Incorrect insertion is prevented. Hot system plugging is
possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which
components can be mounted) and low-profile connectors
are available.
• In addition to connectors for type I and type II cards, a
connector for type III cards has been provided.
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided
mounting are available.

SPECIFICATIONS

Item
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric withstanding voltage
Insertion/withdrawal life
Specifications
subject to change
Specification
– 55 C to + 85 C
DC 0.5 A
AC 250 V
40 m max (6 VDC, 0.1 A)
1000 M min. (500 VDC)
500 VAC for 1 minute
Industrial environment: 5,000 times
Office environment: 10,000 times
Dimensions are in millimeters (inches)
PIN CONNECTOR (PLUG) CONTACT LENGTH
Contact type
Pin No.
Power, ground pins
1, 17, 34, 35, 51, 68
Card detection pins
36, 67
Other signal pins
Others
MATERIALS
Item
Plug body: PPS resin UL94V-0
: 6T nylon (for type III card connector) UL94V-0
Insulating material
Ejector: Polyester
: PPS resin (for SMT and type III card connectors)
Copper alloy
Conductor
Contact: Gold over palladium over nickel
Plating
(PAGOS)
Terminal: Palladium
www.fcai.fujitsu.com
Contact length
5.0 mm (0.196 in.)
3.5 mm (0.137 in.)
4.25 mm (0.167 in.)
Specification
1
loading

Summary of Contents for Fujitsu 560H SERIES

  • Page 1: Specifications

    Office environment: 10,000 times Insulating material Ejector: Polyester : PPS resin (for SMT and type III card connectors) Copper alloy Conductor Contact: Gold over palladium over nickel Plating (PAGOS) Terminal: Palladium Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 2 Pin type 4: Straight 5: Right-angle 8: SMT 560 series connector Fujitsu connector ORDERING PART NUMBER [SOCKET] FCN-56 8 J 068-G / 0 Terminal type 0: PC board double-sided straddle type B: PC board single-sided mounting type Plating G: Gold plating...
  • Page 3 Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm. Unit: mm (in.) In order to avoid damage to the connector, do not pull out the card at an angle. Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 4 • Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board) • A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II) Unit: mm (in.) Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 5 No.34 No.68 No.68 No.34 No.34 No.1 No.68 No.68 No.1 No.35 ±0.05 (0.0020) 136- ø 1 (0.039) No.35 2- ø 2.8 (0.110) ±0.1 (0.0039) ±0.05 (0.0020) 1.905 (0.075) Unit: mm (in.) Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 6 1.27 (0.05) ±0.1 (0.0039) 2- ø 2.8 (0.110) ±0.05 (0.0020) 5.715 (0.225) 68- ø 1 (0.039) ±0.05 (0.0020) ±0.05 (0.0020) 3.810 (0.15) No.35 Unit: mm (in.) No.68 ±0.05 (0.0020) 1.905 (0.075) Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 7 50.8 (2) ±0.1 (0.0039) No.1 41.91 (1.65) ±0.1 (0.0039) No.2 ±0.05 (0.0020) 1.27 (0.05) ±0.1 (0.0039) No.3 No.68 ±0.05 (0.0020) 34 (1.339) 67.31 (2.65)~68.0 (2.677) (Card insertion side) Unit: mm (in.) Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 8 ±0.1 (0.0039) 50.8 (2) No.1 41.91 (1.65) ±0.1 (0.0039) No.2 ±0.05 (0.0020) 1.27 (0.05) ±0.1 (0.0039) No.3 No.68 34 (1.339) ±0.05 (0.0020) 67.31 (2.65)~68.0 (2.677) (Card insertion side) Unit: mm (in.) Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 9: Mounting Example

    34 (1.339) 67.31 (2.65)~68.0 (2.677) Regardless of how the connector is mounted on the PC board, a card can be inserted with its face upward. Unit: mm (in.) Ejector button Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 10 (Card insertion side) MOUNTING EXAMPLE Mounting height 4.5mm(0.177in.) M2.5 screw Unit: mm (in.) The connector is mounted on a PC board so that only its terminal connection part rests on the board. Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 11 Unit: mm (in.) (when a 1.6 mm (0.063 in.) thick PC board is used) to mount –0 61.7 (2.429) the connector to the board. Component mounting is prohibited in the hatched areas. Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 12 • Use M3 mm (0.118 in.) x 5.5 mm (0.217 in.) thread self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is used) to mount the connector to the board. Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 13 No.35 Unit: mm (in.) No.68 28.45 (1.12) 2 (0.079) • Models with a right-button ejector, and with or without an ESD/FG clip are also available. Contact Fujitsu. PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) ±0.1 (0.0039) 50.8 (2) 1.27 (0.05) (68/2-1) No.1...
  • Page 14 MOUNTED IN THIS AREA 1.905 0.05 (.075 0.002 3.810 0.05 (.150 0.002 NOTE 4 UNLESS OTHERWISE SPECIFIED TOLERANCES ARE 0.5mm (0.002 in.) Note 2 5.715 0.05 (.225 0.002 Unit: mm (in.) Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 15 MOUNTED IN THIS AREA 1.905 0.05 (.075 0.002 3.810 0.05 (.150 0.002 NOTE 4 UNLESS OTHERWISE SPECIFIED TOLERANCES ARE 0.5mm (0.002 in.) Note 2 5.715 0.05 (.225 0.002 Unit: mm (in.) Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 16 1.27 (0.05) (68/2-1) No.1 ±0.1 (0.0039) = 41.91 (1.65) No.35 ±0.05 (0.0020) 1.27 (0.05) No.34 No.68 No.34 No.68 No.1 No.35 34 (1.339) ±0.05 (0.0020) 67.31 (2.65) ±0.1 (0.0039) Unit: mm (in.) Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 17 Unit: mm (in.) Button Left Button Color 8 (.315) 4 (.157) 2.1 (.083) FCN-560A16 BLACK FCN-560A22 BEIGE 7.22 (.284) 25 (.984) 50.6 (1.99) 7 (.275) 11 (.433) Unit: mm (in.) Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 18 PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 0.1 (0.0039) 1.27 x (68/2-1) = 41.91 (1.65) No.1 0.05 (0.0020) 1.27 (0.05) No. 35 No.68 51.8 (2.039) 0.1 (0.0039) Unit: mm (in.) Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 19 No.1 No.17 No.34 No.51 No.35 No.68 Unit: mm (in.) • A model with the feature of preventing mismated board mounting is available. Contact Fujitsu. PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 66.04 (2.6) 0.1 (0.0039) No.1 41.91 (1.65) 0.1 (0.0039) No.2...
  • Page 20 No.68 Unit: mm (in.) PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) ±0.1 (0.0039) 66.04 (2.6) No.1 41.91 (1.65) ±0.1 (0.0039) No.2 ±0.05 (0.0020) 1.27 (0.05) No.3 No.68 Unit: mm (in.) Specifications Dimensions are in millimeters (inches) www.fcai.fujitsu.com subject to change...
  • Page 21 © 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the prop- erty of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets witout prior notice.