Fujitsu LifeBook S761 User Manual

Fujitsu LifeBook S761 User Manual

Hide thumbs Also See for LifeBook S761:
Table of Contents
Available languages

Available languages

Quick Links

User's Guide
Guide
d'utilisation
Learn how to use your Fujitsu
®
LIFEBOOK
S761 notebook
Découvrez comment utiliser 
votre ordinateur portable 
Fujitsu LIFEBOOK S761

Chapters

Table of Contents
loading

Summary of Contents for Fujitsu LifeBook S761

  • Page 1  Learn how to use your Fujitsu User’s Guide ® LIFEBOOK S761 notebook Guide Découvrez comment utiliser   votre ordinateur portable  d’utilisation Fujitsu LIFEBOOK S761...
  • Page 2 User’s Guide Learn how to use your Fujitsu LIFEBOOK S761 notebook...
  • Page 3 User’s Guide Learn how to use your Fujitsu LIFEBOOK S761 notebook...
  • Page 4 © Copyright 2011 Fujitsu America, Incorporated. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu.
  • Page 5 WWAN CONTAINING WARNINGS AND PRECAUTIONS ASSOCIATED WITH SAFETY WHEN USING THE DEVICE DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Fujitsu America, Incorporated Address: 1250 E. Arques Avenue, Sunnyvale, CA 94085 Telephone: (408) 746-6000 Declares that product:...
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Class II Adapters with an output rating of 19 VDC, with a current of 4.22A (80 W). AC adapter output polarity: When using your notebook equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: •...
  • Page 7: Recycling Your Battery

    * To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site at www.shopfujitsu.com in the US or www.fujitsu.ca/products/notebooks in Canada. ** RBRC is an independent third party to which Fujitsu provides funding for battery recycling; RBRC is in no way affiliated with Fujitsu.
  • Page 8: Table Of Contents

    Fujitsu Contact Information ........9...
  • Page 9 Keyboard ........... . 26 Using the Keyboard .
  • Page 10 Fujitsu Driver Update Utility ........57...
  • Page 11 Secure Digital (SD) Cards........73 Installing SD Cards.
  • Page 12 Restoring Your Pre-installed Software ......102 Saving your Factory Image........102 Creating Backup Images of Factory Image, DAR, and Discs .
  • Page 13 Keyboard........... 126 Power .
  • Page 14 WLAN Specifications ......... . 160 Specifications .
  • Page 15: Preface

    Pages with additional information about a specific topic are cross-referenced within the text. For example: (“See Installation Procedure on page 43”.) On screen menu items appear in bold. Example: “Click Fujitsu Menu, and select your choice”. DOS commands you enter appear in Courier type. Example: “Shutdown the computer?”...
  • Page 16: Fujitsu Contact Information

    LEASE READ ALL WARNING INFORMATION CAREFULLY Fujitsu Contact Information Service and Support You can contact Fujitsu Service and Support in the following ways: • Toll free: 1-800-8Fujitsu (1-800-838-5487) • Website: http://www.computers.us.fujitsu.com/support Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution: •...
  • Page 17 OU MUST HAVE AN ACTIVE INTERNET CONNECTION TO USE THE ONLINE LINKS Limited Warranty Your LIFEBOOK notebook is backed by a Fujitsu International Limited Warranty. Check the service kit that came with your notebook for the Limited Warranty period and terms and conditions. 10 - About This Guide...
  • Page 18: Getting To Know Your Lifebook

    Getting to Know Your LIFEBOOK Overview This section describes the components of your Fujitsu LIFEBOOK S761 notebook. We strongly recommend that you read it before using your notebook – even if you are already familiar with notebook computers. Figure 1. Fujitsu LIFEBOOK S761 notebook...
  • Page 19: Locating The Controls And Connectors

    Locating the Controls and Connectors Web Camera Stereo Microphone Web Camera Indicator Stereo Microphone Display Panel Status Indicator Panel Stereo Speaker Touchpad LIFEBOOK Security/ Pointing Application Panel Device Power/Suspend/Resume Button Stereo Speaker Fingerprint Sensor Keyboard SD Card Slot Scroll Wheel Status Indicator Panel Wireless Device On/Off Switch Figure 2.
  • Page 20: Top Components

    Top Components The following is a brief description of your LIFEBOOK notebook’s top components. Web Camera The built-in camera has a resolution of 2.0 megapixels. For instructions on using the camera, see the help files that are included with the webcam software application. Web Camera Indicator The web camera indicator shows when your web camera is active.
  • Page 21 Scroll Wheel The scroll wheel is a round “dimple” to the right of the touchpad. The scrolling wheel allows you to navigate around pages by moving your finger in the direction you want to scroll. Wireless Device On/Off Switch The wireless device on/off switch is used to turn the optional wireless devices auch as WLAN and Bluetooth on and off.
  • Page 22: Left-Side Panel Components

    USB 3.0 Port Microphone Jack DC Power Jack HDMI Port Headphone Jack USB 2.0 Port with Anytime USB Charge Air Vents Figure 3. LIFEBOOK notebook left-side panel Left-Side Panel Components The following is a brief description of your LIFEBOOK notebook’s left-side components. DC Power Jack The DC power jack allows you to plug in the AC adapter to power your LIFEBOOK notebook and charge the internal Lithium ion battery.
  • Page 23 Headphone/Line Out Jack The headphone/line out jack allows you to connect headphones. See “Headphone/Line-Out Jack” on page 84. USB 2.0 Port (with Anytime USB Charge) The USB 2.0 ports allow you to connect Universal Serial Bus devices. USB 2.0 transfers data at up to 480 Mbps and is backward-compatible with USB 1.1 devices, which transfer data at up to 12 Mbps.
  • Page 24: Right-Side Panel Components

    Express/PC Card Optical Drive Air Vents Security Lock Slot Eject Button Release Button USB 2.0 Port Flexible Bay LAN (RJ-45) Jack Express/PC Card Slot (shown with Optical Drive installed) Figure 4. LIFEBOOK notebook right-side panel Right-Side Panel Components The following is a brief description of your LIFEBOOK notebook’s right-side components. Express/PC Card Eject Button The Express/PC Card eject button is used for removing an ExpressCard or PC Card from the slot (depending upon which type of card slot was configured with your system).
  • Page 25 USB 2.0 Port The USB 2.0 ports allow you to connect Universal Serial Bus devices. USB 2.0 transfers data at up to 480 Mbps and is backward-compatible with USB 1.1 devices, which transfer data at up to 12 Mbps. See “Universal Serial Bus Ports”...
  • Page 26: Back Panel Components

    External Video Port Figure 5. LIFEBOOK notebook back panel Back Panel Components Following is a brief description of your LIFEBOOK notebook’s back panel components. External Video Port The external monitor port allows you to connect an external monitor or LCD projector. See “External Video Port”...
  • Page 27: Bottom Components

    Flexible Bay Device Lock Air Vents (multiple locations) Memory Upgrade Compartment Dust Filter Cover Port Replicator Connector Battery Release Latch Battery Release Latch Lithium ion Battery Pack Figure 6. LIFEBOOK notebook bottom panel Bottom Components The following is a brief description of your LIFEBOOK notebook’s bottom panel components. Flexible Bay Device Lock The flexible bay device lock is used to lock and release a modular flexible bay device in the flexible bay.
  • Page 28 Memory Upgrade Compartment Your notebook comes with high speed Double Data Rate 3 Synchronous Dynamic RAM (DDR3 SDRAM). The memory upgrade compartment allows you to expand the system memory capacity of your notebook, thus improving overall performance. See “yMemory Upgrade Module” on page 78. Under normal circumstances, it should not be necessary to open this compartment.
  • Page 29: Status Indicator Panel

    Battery 1 Level Figure 7. Status Indicator Panel Status Indicator Panel The Status Indicators display symbols that correspond to specific components of your Fujitsu LIFEBOOK notebook. The LEDs below each symbol tell you how each of those components is operating. ...
  • Page 30: Hard Drive/Optical Drive Access Indicator

    Hard Drive/Optical Drive Access Indicator The Hard Drive/Optical Drive Access indicator glows green when your internal hard drive is being accessed. Note that flickering is normal.  NumLk Indicator  The NumLk indicator shows that the integral keyboard is set in ten-key numeric keypad mode. CapsLock Indicator...
  • Page 31 If you are charging your battery, the Power indicator will remain on even if your notebook is shut off. The Power indicator will also remain on if you have either adapter connected and are shut down from Windows. Battery Charge Indicator The battery charge indicator shows the charging status of the battery(ies).
  • Page 32 • If the battery pack is installed while the power is turned off, the battery level indicator will display the charge level for five seconds after it blinks orange. • If the AC adapter is not connected or the battery pack is not fully charged when the computer is switched to standby mode, the indicator will blink.
  • Page 33: Keyboard

    Figure 8. Keyboard Using the Keyboard Your Fujitsu LIFEBOOK notebook has an integral 84-key keyboard. The keys perform all the standard functions of a 101-key keyboard, including the Windows keys and other special function keys. This section describes the following keys.
  • Page 34 • Cursor keys: Your keyboard contains four arrow keys for moving the cursor or insertion point to the right, left, up, or down within windows, applications and documents. • Function keys: The keys labeled [F1] through [F12], are used in conjunction with the [Fn] key to produce special actions that vary depending on what program is running.
  • Page 35 Function Keys Your LIFEBOOK notebook has 12 function keys, F1 through F12. The functions assigned to these keys differ for each application. You should refer to your software documentation to find out how these keys are used. • The [Fn] key provides extended functions for the notebook and is always used in conjunction with another key.
  • Page 36: Touchpad Pointing Device/Scroll Wheel

    Figure 9. Touchpad pointing device The Touchpad pointing device comes built into your Fujitsu LIFEBOOK notebook. It is used to control the movement of the pointer to select items on your display panel. The Touchpad is composed of a cursor control, a left button, a right button, and a scroll/fingerprint sensor.
  • Page 37 To the right of the touchpad is a circular dimple, approximately an inch in diameter. This is known as the “scroll wheel” and is used for scrolling up and down pages and zooming in and out on photos. Note that the scroll wheel does not actually move;...
  • Page 38 Double-Clicking Double-clicking means pushing and releasing the left button twice in rapid succession. This procedure does not function with the right button. To double-click, move the cursor to the item you wish to select, press the left button twice, and immediately release it. You can also perform the double-click operation by tapping lightly on the Touchpad twice.
  • Page 39 Dragging Dragging means pressing and holding the left button, while moving the cursor. To drag, move the cursor to the item you wish to move. Press and hold the left button while moving the item to its new location and then release it.
  • Page 40: Using The Scroll Wheel

    Scrolling Using the fingerprint sensor as a scrolling button allows you to navigate through a document quickly without using the window’s scroll bars. This is particularly useful when you are navigating through on-line pages. To use the sensor, slide your finger forwards or backwards, depending upon the direction you want to scroll.
  • Page 41: Navigating Using Gestures

    Navigating Using Gestures The touchpad allows you to use gestures to zoom in or out on a page or scroll quickly through large documents. Zooming In: To zoom in on a page using the touchpad, simply place two fingers together on the touchpad and move them away from each other.
  • Page 42: Touchpad Control Adjustment

    Enabling/Disabling Gesture Functions: To enable or disable the gesturing functions, go to Start > Control Panel > Hardware and Sound. Double-click Mouse, and the Mouse Properties window will appear. Select the Device Settings tab and click the [Settings...] button. To enable/disable continuous scrolling: Select Virtual Scrolling from the left pane, check Enable Vertical Scrolling and/or Enable Horizontal Scrolling, and then check Chiral Motion.
  • Page 43 Figure 20. Speeding up cursor movement Figure 19. Continuous scrolling 36 - Touchpad Pointing Device/Scroll Wheel...
  • Page 44: Volume Control

    Volume Control Your Fujitsu LIFEBOOK notebook has multiple volume controls which interact with each other. NY SOFTWARE THAT CONTAINS AUDIO FILES WILL ALSO CONTAIN A VOLUME CONTROL OF ITS OWN YOU INSTALL AN EXTERNAL AUDIO DEVICE THAT HAS AN INDEPENDENT VOLUME CONTROL...
  • Page 45: Flexible Bay Devices

    Figure 21. Flexible Bay Flexible Bay Devices Your Fujitsu LIFEBOOK notebook contains a Flexible Bay. The Flexible Bay can house an optical drive, a Lithium ion battery, or a weight saver. Your Flexible Bay will have one of the following devices installed.
  • Page 46 OU SHOULD NEVER LEAVE YOUR LEXIBLE AY EMPTY WHEN THE NOTEBOOK IS IN OPERATION LEFT EMPTY DUST OR FOREIGN MATTER MAY ACCUMULATE INSIDE THE NOTEBOOK Cold-swapping To cold-swap modular devices in your Flexible Bay follow these easy steps: Close any open files. Shut down your LIFEBOOK notebook.
  • Page 47: Lifebook Security/Application Panel

    Enter Button 3/ Enter Button 1/ Display Manager Button Support Button Button 2/ Button 4/ Power Saving Utility Screen Lock Figure 23. LIFEBOOK Security/Application Panel LIFEBOOK Security/Application Panel A unique feature of your LIFEBOOK notebook is the Security/Application Panel that allows you to secure your notebook from unauthorized use.
  • Page 48: Passwords

    Numbered Buttons Use these buttons to enter your password. Enter Button After entering the button strokes, push this button to enter the password into the LIFEBOOK notebook. Passwords The user and supervisor password may be set on this notebook. A supervisor password is typically the same for all LIFEBOOK notebooks in a working group, office, or company to allow for system management.
  • Page 49 Go to the Start menu. Select All Programs. Select Accessories, then select Run. Type in: C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE, then press [Enter] Follow the on-screen instructions to set the Supervisor password. Setting User Password Go to the Start menu. Click on Programs (or All Programs).
  • Page 50: Operating Your Lifebook Security/Application Panel

    Operating Your LIFEBOOK Security/Application Panel The security lock feature is in effect both when the system resumes from Off or suspend state. You will need to enter the user password right after pressing the Suspend/Resume button. Your system will not boot or resume from Standby without entering your supervisor/user password.
  • Page 51: Precautions

    Precautions Opening and Closing the Cover Closing the cover automatically places the notebook into suspend mode. Opening it does not place the notebook into normal operation automatically. Instead, you must enter the proper security password after pushing the power/suspend/resume button. The setting can be changed in Power Options Control Panel. Low Battery Operations If your LIFEBOOK notebook has low battery, pushing the Power/Suspend/Resume button only turns on the Security Indicator.
  • Page 52 EMOVING THE APPLICATIONS DOES NOT REMOVE THE PASSWORD T SIMPLY REMOVES THE UTILITY TO CHANGE REMOVE PASSWORDS O CHANGE YOUR PASSWORD YOU MUST REINSTALL THE APPLICATION User: Go to Start Menu, Click on Control Panel. Open Programs and Features) in the Control Panel. Select the Security Panel in the list, and click Add/Remove.
  • Page 53: Launching Applications With The Security/Application Panel

    If you forget both passwords, contact Fujitsu America Service and Support at 1-800-8FUJITSU (1-800- 838-5487). Fujitsu America charges a service fee for unlocking a password restricted LIFEBOOK notebook. When calling please have a valid credit card and provide proof of ownership. You will then be given instructions on where to ship your notebook.
  • Page 54 To change an application associated with the Application buttons, click on the tab for the button you would like to reconfigure – for example, Application A. Click on Browse from Start Menu, scroll down the list of applications, click on the application you wish to launch with this button, and then click OK. The button will now launch the new application.
  • Page 55: Getting Started With Your Lifebook

    Chapter 2 Getting Started with Your LIFEBOOK Power Sources Your Fujitsu LIFEBOOK notebook has three possible power sources: a primary Lithium ion battery, an AC adapter or an optional Auto/Airline adapter. Connecting the Power Adapters The AC adapter or optional Auto/Airline adapter provides power for operating your notebook and charging the batteries.
  • Page 56 Connecting the Optional Auto/Airline Adapter Plug the DC output cable into the DC power jack on your notebook. Plug the Auto/Airline adapter into the cigarette lighter of an automobile with the ignition key in the On or Accessory position. Plug the Auto/Airline adapter into the DC power jack on an airplane seat. Switching from AC Adapter Power or the Auto/Airline Adapter to Battery Power Be sure that you have at least one charged battery installed.
  • Page 57: Display Panel

    Figure 25. Opening the Display Panel Display Panel Your Fujitsu LIFEBOOK notebook contains a display panel that is backlit for easier viewing in bright environments and maintains top resolution through the use of active-matrix technology. SE CARE WHEN OPENING AND CLOSING THE DISPLAY...
  • Page 58: Adjusting Display Panel Brightness

    Adjusting Display Panel Brightness Once you have turned on your LIFEBOOK notebook, you may want to adjust the brightness level of the screen to a more comfortable viewing level. There are three ways to adjust the brightness, by using the keyboard, the Power Options, or the Windows Mobility Center.
  • Page 59: Starting Your Lifebook Notebook

    Starting Your LIFEBOOK Notebook Power On Power/Suspend/Resume Button The Power/Suspend/Resume button is used to turn on your notebook from its off state. Once you have connected your AC adapter or charged the internal Lithium ion battery, you can power on your notebook. LIFEBOOK HEN YOU TURN ON YOUR NOTEBOOK...
  • Page 60: Boot Sequence

    This information is in the BIOS program. Each time you power up or restart your notebook, it goes through a boot sequence which displays a Fujitsu logo until your operating system is loaded. During booting, your notebook is performing a standard boot sequence including a Power On Self Test (POST).
  • Page 61: Bios Setup Utility

    Turn on or restart your LIFEBOOK notebook. To enter the BIOS Setup Utility, press the [F2] key once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed.
  • Page 62: Booting The System

    When you turn on your notebook for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin.
  • Page 63 You will next see a "Help protect Windows automatically" screen in which the default choice is "Use recommended settings”. The other two choices are "Install important updates only" and "Ask me later". Select from the three choices. On the next screen set your time and date settings. You will next see the "Select your computer's current location"...
  • Page 64: Registering Your Lifebook With Fujitsu

    Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. For more information about the FDU utility, refer to “Automatically Downloading Driver Updates” on page 111.
  • Page 65: Power Management

    Power Management Your Fujitsu LIFEBOOK notebook has many options and features for conserving battery power. Some of these features are automatic and need no user intervention, such as those for the internal modem. However, others depend on the parameters you set to best suit your operating conditions, such as those for the display brightness.
  • Page 66 • Pressing the Power/Suspend/Resume button when your system is turned on. • Selecting “Sleep” after clicking [Start] then clicking the small arrow at the bottom right of the window. • Timing out from lack of activity. • Allowing the battery to reach the Dead Battery Warning condition. Your notebook’s system memory typically stores the file on which you are working, open application information, and any other data required to support operations in progress.
  • Page 67: Hibernation (Save-To-Disk) Feature

    Hibernation (Save-to-Disk) Feature The Hibernation feature saves the contents of your notebook’s system memory to the hard drive as a part of the Suspend/Resume mode. You can enable or disable this feature. Enable or Disable the Hibernation Feature Hibernate is enabled by default. To disable or enable the Hibernation feature follow these steps: From the Start menu, select Control Panel, then select the Power Options icon.
  • Page 68: Powering Off

    Powering Off Before turning off the power, check that the hard drive/optical drive access indicator is off. If you turn off the power while accessing a disk there is a risk of data loss. To ensure that your notebook shuts down without error, use the Windows shut down procedure.
  • Page 69: User-Installable Features

    Chapter 3 User-Installable Features Lithium ion Battery Your LIFEBOOK notebook has a Lithium ion battery that provides power for operating your notebook when no external power source is available. The battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemicals or other hazards.
  • Page 70: Recharging The Batteries

    • CTUAL BATTERY LIFE WILL VARY BASED ON SCREEN BRIGHTNESS APPLICATIONS FEATURES POWER MANAGEMENT SETTINGS BATTERY CONDITION AND OTHER CUSTOMER PREFERENCES DVD W , DVD/CD-RW ULTI ORMAT RITER DRIVE COMBO OR HARD DRIVE USAGE MAY ALSO HAVE A SIGNIFICANT IMPACT ON BATTERY LIFE HE BATTERY CHARGING CAPACITY IS REDUCED AS THE BATTERY AGES F YOUR BATTERY IS RUNNING LOW QUICKLY...
  • Page 71 DVD/CD-RW/CD-ROM SING HEAVY CURRENT DEVICES SUCH AS THE MODEM OR FREQUENT ACCESSES MAY PREVENT CHARGING COMPLETELY Low Battery State When the battery is running low, a low battery notification message will appear. If you do not respond to the low battery message, the batteries will continue to discharge until they are too low to operate. When this happens, your notebook will go into Standby mode.
  • Page 72: Replacing The Battery

    Replacing the Battery With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged. There are two ways to swap batteries, cold-swapping and hot-swapping: Cold-swapping Batteries To cold-swap batteries in your battery bay follow these easy steps: Have a charged battery ready to install.
  • Page 73 Lift Point Battery Pack Battery Lock Battery Latch Figure 26. Unlocking a Battery Figure 27. Removing a Battery 66 - Lithium ion Battery...
  • Page 74: Optical Drive

    Media Holder Tray Emergency Tray Release Media Tray Eject Button Figure 28. Optical Drive Optical Drive There is a variety of media available to use with your systemif you have the optional Multi-Format DVD Writer installed. The drive is also known as an “optical drive”. DVD-R and DVD-RW discs hold up to 4.7 GB of data (DVD-R discs used with Multi-Format Dual-Layer DVD writer hold up to 8.5 GB).
  • Page 75: Media Player Software

    LIFEBOOK notebook a short distance. Gently pull the tray out until a media disc can easily be placed in the tray. • OU SHOULD PERIODICALLY CHECK THE UJITSU WEBSITE AT US FUJITSU COMPUTERS FOR THE MOST CURRENT DRIVERS • LIFEBOOK DVD...
  • Page 76 Place the media into the tray, label side up, with the hole in the center of the disc. Snap the disc onto the raised circle in the center of the tray. Gently push the holder tray back in until you hear a click F YOU HAVE DISABLED THE NSERT OTIFICATION...
  • Page 77: Removing Media

    Removing Media Push and release the eject button on the front of the optical drive. This will stop the drive and the holder tray will come out of the LIFEBOOK notebook a short distance. Gently pull the tray out until the disc can easily be removed from the tray. Carefully remove the media disc from the holder tray.
  • Page 78: Using Media Player On Battery Power

    Click OK to close the About DVD Player Performance dialog box and the movie will begin. Opening the Media Player Control Panel With most DVD-ROMs, you have the option of altering how the movie should play and what you wish to view.
  • Page 79 YOU MAY PURCHASE ONE 1-877-372-3473. EITHER ONLINE AT HTTP COMPUTERS FUJITSU COM OR BY CALLING To Watch a Movie on Battery Power: Have an additional full-charged battery or your AC adapter ready for use. Start watching your DVD movie. When the low battery warning occurs, immediately stop the movie and exit the media player.
  • Page 80: Secure Digital (Sd) Cards

    Secure Digital Card Secure Digital Card Slot Figure 31. Installing a Secure Digital Card Secure Digital (SD) Cards Your LIFEBOOK notebook Secure Digital (SD) cards on which you can store and transfer data to and from a variety of digital devices. These cards use flash memory architecture, which means they don’t need a power source to retain data.
  • Page 81: Removing An Sd Card

    Make sure there is no card currently in the slot. If there is, see Removing an SD Card. Insert your card into the slot with the product label facing up. Push the card firmly into the slot until it is seated in the connector. Removing an SD Card To remove an SD Card, push the card in until it unlatches.
  • Page 82: Using Express/Pc Cards

    Eject Button PC Card Express Card Figure 32. Installing/Removing Express Cards or PC Cards Using Express/PC Cards Depending upon your system configuration, your LIFEBOOK notebook supports either ExpressCards or PC Cards, both of which can perform a variety of functions depending on which type of card you install. There are two different width ExpressCards: 34 mm and 54 mm.
  • Page 83: Installing Express/Pc Cards

    Installing Express/PC Cards • PC C ’ NSTALLING OR REMOVING AN XPRESS ARD OR ARD DURING YOUR NOTEBOOK S SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND OR YOUR NOTEBOOK • PC C O NOT INSERT AN XPRESS ARD OR ARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD YOUR NOTEBOOK...
  • Page 84: Removing Express/Pc Cards

    Removing Express/PC Cards See your Express Card or PC Card manual for specific instructions on removing your card. Some cards may require your notebook to be in Standby Mode or Off during removal. • PC C INDOWS HAS A SHUTDOWN PROCEDURE FOR XPRESS ARDS AND ARDS THAT MUST BE FOLLOWED...
  • Page 85: Memory Upgrade Module

    Memory Upgrade Module Your Fujitsu LIFEBOOK notebook comes with a minimum of 2GB of high speed Double Data Rate 3 Synchronous Dynamic RAM (DDR3-1333 SDRAM) factory installed. To increase your notebook’s memory capacity, you may install an additional memory upgrade module. The memory upgrade must be a dual-in- line (DIMM) SDRAM module.
  • Page 86 Replace the cover and reinstall the screws. Figure 33. Removing Memory Cover Figure 34. Installing a Memory Module Figure 35. Removing a Memory Module 79 - yMemory Upgrade Module...
  • Page 87: Removing A Memory Upgrade Module

    HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK NCE IT IS INSTALLED YOU SHOULD LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY CAPACITY Removing a Memory Upgrade Module Perform steps 1 through 4 of Installing a Memory Upgrade Module. Pull the clips sideways away from each side of the memory upgrade module at the same time.
  • Page 88: Device Ports

    Device Ports Your LIFEBOOK notebook and the optional Port Replicator come equipped with multiple ports to which you can connect external devices including: disk drives, keyboards, modems, printers, etc. Universal Serial Bus Ports The Universal Serial Bus ports (USB) allow you to connect USB devices such as external game pads, pointing devices, keyboards and/or speakers.
  • Page 89: Hdmi Port

    HDMI Port The High-Definition Multimedia Interface (HDMI) port is a digital audio/video interface over which uncompressed streams can be transmitted. HDMI is used to connect compatible digital devices with your computer (such as a big- screen TV). To connect an HDMI device: Align the connector with the HDMI port opening on the left side of the system.
  • Page 90: External Video Port

    External Video Port The external video port allows you to connect an external monitor or LCD projector. In order to connect an external video device, follow these easy steps: Align the connector with the port opening. Push the connector into the port until it is seated.
  • Page 91: Headphone/Line-Out Jack

    Headphone/Line-Out Jack The headphone/line-out jack allows you to connect headphones or powered external speakers to your notebook. Your headphones or speakers must be equipped with a 1/8” (3.5 mm) stereo mini-plug. In order to connect headphones or speakers follow these easy steps: Align the connector with the port opening.
  • Page 92: Port Replicator

    Port Replicator The port replicator extends the functionality of your LIFEBOOK notebook by providing ports to connect an external VGA monitor, a LAN (RJ-45) cable, four USB 2.0 devices, a DVI-D device, an eSATA device, a parallel device, a serial device, headphones, and DC power. The port replicator connects to the bottom of your LIFEBOOK notebook.
  • Page 93: Port Replicator Components

    Port Replicator Components The following is a brief description of the port replicator’s back panel components. (Figure 40) Power Button The power button allows you to power the port replicator on and off. Headphone/Line Out Jack The headphone/line out jack allows you to listen to stereo sound from your notebook with portable headphones.
  • Page 94: Attaching The Port Replicator

    Security Lock Slot The security lock slot allows you to attach an optional physical lock down device. DC Power Jack The DC power jack allows you to plug in the AC adapter to power your notebook and charge the internal Lithium ion battery.
  • Page 95: Detaching Port Replicator

    Detaching Port Replicator To detach the Port Replicator: Pull the Port Replicator’s release latch away from the Port Replicator to release it from your notebook. (Figure 42) (Figure 43) Lift the notebook away from the Port Replicator to detach it. Release Latch Figure 42.
  • Page 96: Troubleshooting Your Lifebook

    Chapter 4 Troubleshooting Your LIFEBOOK Troubleshooting There may be occasions when you encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices that can be solved by replacing the device. The information in this section helps you isolate and resolve some of these straightforward issues and identify failures that require service.
  • Page 97 If you have tried the solutions suggested in the Troubleshooting Table without success, contact your support representative: Toll free: 1-800-8Fujitsu (1-800-838-5487)  Web site: http://www.fujitsu.com/us/support/. Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution: •...
  • Page 98: Specific Problems

    Specific Problems Using the Troubleshooting Table When you have problems with your LIFEBOOK notebook, try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you difficulty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions.
  • Page 99: Audio Problems

    Problem Possible Cause Possible Solutions Audio Problems There is no sound coming The volume is turned Use the [Fn+F9] key combination on your keyboard to control the from the built-in speakers. too low. volume. Pressing [F9] repeatedly while holding [Fn] will increase the volume of your notebook.
  • Page 100: Hard Drive Problems

    Problem Possible Cause Possible Solutions LIFEBOOK notebook fails Incorrect DVD Player or Install DVD Player software. (See “Media Player Software” on to recognize DVD/CD- no DVD Player software page 68 for more information.) RW/CD-ROM’s. is installed. (continued) Wrong drive designator Verify the drive designator used by the application is the same as was used for the disc in the one used by the operating system.
  • Page 101: Memory Problems

    Problem Possible Cause Possible Solutions You have installed an exter- Your external device is Re-install your device. See “Device Ports” on page 81. nal keyboard or mouse, and not properly installed. it does not seem to work. Your operating system Check your device and operating system documentation and acti- software is not set up vate the proper driver.
  • Page 102: Express Card Problems

    Problem Possible Cause Possible Solutions Express Card Problems A card inserted in the The card is not properly Remove and re-install the card. See “Using Express/PC Cards” on Express Card/PC Card slot installed. page 75. does not work or is locking Your software may not See your software documentation and activate the correct driver.
  • Page 103 Problem Possible Cause Possible Solutions You turn on your LIFEBOOK The power adapter (AC Verify that your adapter is connected correctly. See “Power or auto/airline) is not Sources” on page 48. notebook and nothing seems plugged in properly. to happen. (continued) The power adapter (AC Move the AC cord to a different outlet, check for a line switch or...
  • Page 104: Shutdown And Startup Problems

    Problem Possible Cause Possible Solutions Your notebook will not work The batteries are Verify that the batteries are properly connected by re-installing on battery alone. improperly installed. them. (continued) Your installed batteries Verify the condition of the batteries using the Status Indicator are faulty.
  • Page 105: Video Problems

    Set the operating source by pressing the [ESC] key while the plays power on info, but tings of the setup utility Fujitsu logo is on screen or use the [F2] key and enter the setup doesn’t load the OS. are not compatible with utility and adjust the source settings from the Boot menu.
  • Page 106 Problem Possible Cause Possible Solutions The built-in display is blank The notebook is set for Pressing [F10] while holding down the [Fn] key allows you to when you turn on your an external monitor change your selection of where to send your display video. Each LIFEBOOK notebook.
  • Page 107: Miscellaneous Problems

    Problem Possible Cause Possible Solutions The display has bright or If the spots are very tiny This is normal; do nothing. dark spots. and few, this is normal for a large LCD display. If the spots are numer- Display is faulty; contact your support representative. ous or large enough to interfere with your oper- ation needs.
  • Page 108: Power On Self Test Messages

    *Real time clock error - Check date and time settings Real-time clock fails BIOS test. May require board repair. Contact your support representative. *Fan error, system shutdown in 30s. Contact Fujitsu tech support Fan error occurred. Please contact your sales representative.
  • Page 109: Restoring Your Pre-Installed Software

    Restoring Your Pre-installed Software It is very important that you create DVD copies of your Factory Image before beginning to use your system. To do so, follow the instructions below in the “Saving Your Factory Image” section. Along with instructions on saving your Factory Image, this document outlines several other important procedures, such as making a system image, restoring your Factory Image and system images, managing your images, and restoring the partitions on a hard drive.
  • Page 110: Creating Backup Images Of Factory Image, Dar, And Discs

    After you launch the ClickMe! utility when you first start up your system, you should make a copy of the Factory Image to DVD discs. You will need several blank discs (DVD-R or DVD+R discs are recommended) in order to create the copy. After creating the copy, be sure to label the discs and keep them in a safe place to ensure they do not get damaged.
  • Page 111: Recovering Your Factory Image

    Repeat the process for the remaining three images on disc (Bootable Disc, Drivers and Applications Restore Disc, and Application Disc). The number of images available may vary depending on your system model; some models do not have the applications loaded on the hard drive. Recovering Your Factory Image In the event you need to restore your original Factory Image, perform the following steps.
  • Page 112 After rebooting, the “Creating of the backup image” window appears, in which you can either click [Create the image on D drive] or [Select the drive] if you want to save to an external hard disk drive. An image appears showing you graphically how the image will be stored. Click the [Next] button. Click [Execute] to start the backup.
  • Page 113: Managing Your Backup Images

    Recovery and Utility Tools, but you will still be able to boot from the disc. Determining whether Recovery and Utility is pre-loaded Turn on or reboot your system. When the Fujitsu logo appears, press [F12] key. 106 - Restoring Your Pre-installed Software...
  • Page 114 HE BOOTABLE DISC CAN ONLY BE USED WITH THE SYSTEM WITH WHICH IT WAS PURCHASED Power on your system. When the Fujitsu logo appears on the screen. press the [F12] key. Select the Boot Menu from the menu that appears.
  • Page 115 When the System Recovery Options dialog opens, select a new keyboard layout, if necessary, then click [Next]. When the Operating System dialog appears, click [Next]. If necessary, enter your password, then click [OK]. When System Recovery Options window appears, click on Recovery and Utility. When the Recovery and Utility screen appears, three tabs will be present: Diagnostics, Recovery, and Utility.
  • Page 116: Recovering Your Factory Image Using Recovery And Utility

    Factory Image: Power on your system. When the Fujitsu logo appears on the screen. press the [F12] key. Select the Boot Menu from the menu that appears.
  • Page 117 “3. Restoring Factory Image to hidden partition” will be in bold with the message “Please insert the Recovery Disk#1 into the optical drive”. Click [Next] to proceed. After completion, the tool will automatically go back to "3.Restoring Factory Image to hidden partition" but will include the note "Please insert your Application Disc(s) starting with #1, then click [OK].
  • Page 118: Automatically Downloading Driver Updates

    Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over the icons to find the correct one).
  • Page 119: Care And Maintenance

    Chapter 5 Care and Maintenance Caring for your LIFEBOOK Notebook If you use your Fujitsu LIFEBOOK notebook carefully, you will increase its life and reliability. This section provides some tips for looking after the notebook and its devices. • (ESD).
  • Page 120 • Your LIFEBOOK notebook is a durable but sensitive electronic device. Treat it with respect and care. • Make a habit of transporting it in a suitable carrying case. • Do not attempt to service the computer yourself. Always follow installation instructions closely. •...
  • Page 121: Cleaning Your Lifebook Notebook

    Cleaning your LIFEBOOK notebook • Always disconnect the power plug. (Pull the plug, not the cord.) • Clean your LIFEBOOK notebook with a damp, lint-free cloth. Do not use abrasives or solvents. • Use a soft cloth to remove dust from the screen. Never use glass cleaners. •...
  • Page 122: Cleaning The Dust Filter

    Disinfecting LIFEBOOK computers • Wipe the surface with a soft cloth wipe and a 50% ethanol solution or use another ethanol-based germicide which has been registered as a hospital disinfectant by the EPA. • SE OF INCORRECT CLEANERS CAN RESULT IN OPTICAL IMPAIRMENT OF THE OR DAMAGE TO THE COMPUTER LWAYS REFER TO THE CLEANER MANUFACTURER...
  • Page 123: Storing Your Lifebook Notebook

    Dust Filter Cover Figure 44. Removing/installing the dust filter cover LWAYS BE SURE THE DUST FILTER COVER IS INSTALLED WHEN RUNNING YOUR SYSTEM OT USING THE COVER COULD CAUSE CONTAMINATION AND POSSIBLE DAMAGE TO THE SYSTEM Storing your LIFEBOOK notebook •...
  • Page 124: Traveling With Your Lifebook Notebook

    Traveling with your LIFEBOOK notebook • Do not transport your notebook while it is turned on. • It is recommended that you carry your notebook with you while traveling, rather than checking it in as baggage. • Always bring your System Recovery CD that came with your notebook when you travel. If you experience system software problems while traveling, you may need it to correct any problems.
  • Page 125: Batteries

    Batteries Caring for your Batteries • Always handle batteries carefully. • Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object). Do not carry loose batteries in a pocket or purse where they may mix with coins, keys, or other metal objects.
  • Page 126: Media Care

    Media Care Caring for your Media (DVD/CD/CD-R) Media discs are precision devices and will function reliably if given reasonable care. • Always store your media disc in its case when it is not in use. • Always handle discs by the edges and avoid touching the surface. •...
  • Page 127: Pc/Express Cards

    • Avoid using or storing the drive near magnets or devices that generate strong magnetic fields. • Avoid using or storing the drive where it will be subjected to shock or vibration. • Do not disassemble or dismantle the optical drive. •...
  • Page 128: System Specifications

    Chapter 6 System Specifications Specifications This section provides the hardware and environmental specifications for your Fujitsu LIFEBOOK notebook. Specifications of particular configurations will vary. Configuration Label The configuration label located on the bottom of your notebook contains specific information regarding the options you’ve chosen for your notebook.
  • Page 129: Microprocessor

    Microprocessor New 2nd Generation Intel® Core™ Processor family. (Refer to system label to determine your processor.) .Chipset Intel QM67 (vPro) or Intel HM65 (non-vPro) chipset Memory System Memory • DDR3-1333 MHz SDRAM dual-channel memory module. • Two DIMM slots; upgradeable to 8 GB of total memory (4 GB x 2). Cache Memory •...
  • Page 130: Audio

    Video RAM • Intel® HD Graphics with dynamic frequency. Automatically distributes performance to CPU and graphics applications that need an extra boost, • NVIDIA® GeForce® GT520M with 1GB GDDR3 memory Audio • Realtek codec ALC269 with 2-channel High Definition (HD) audio. •...
  • Page 131: Features

    Features Integrated Pointing Device • Touchpad pointing device • Scroll Wheel Communications • LAN:1 Gigabit Ethernet LAN Wireless LAN • Integrated Intel Centrino Advanced-N 6200 (802.11agn 2x2), or, Atheros XSPAN 801.11bgn • Bluetooth device for wireless personal area network communication Wireless Display Optional Intel Wireless Display (WiDi) technology WebCam...
  • Page 132: Device Ports

    Device Ports On the LIFEBOOK notebook: • One PC Card or Express Card slot • Secure Digital (SD) Card slot • One 15-pin D-SUB connector for VGA external monitor • Three USB (Universal Serial Bus) connectors for input/output devices: One standard USB 2.0 connector, one USB 2.0 connector with Anytime USB Charge, and one USB 3.0 connector.
  • Page 133: Keyboard

    Keyboard Built-in keyboard with all functions of 101 key PS/2 compatible keyboards. • Total number of keys: 84 • Function keys: F1 through F12 • Feature extension key: Fn • Two Windows keys: one Start key, one application key • Key pitch: 19 mm •...
  • Page 134: Dimensions And Weight

    Operating: 20% to 85%, relative, non-condensing; Non-operating; 8% to 85%, relative, non-condensing Altitude Operating: 10,000 feet (3,048 m) maximum Popular Accessories For ordering or additional information on Fujitsu accessories please visit our Web site at  www.shopfujitsu.com or call 1-800-FUJITSU. 127 - Specifications...
  • Page 135: Pre-Installed Software

    Pre-Installed Software Depending on your pre-installed operating system, your notebook comes with pre-installed software for playing audio and video files of various formats. In addition there is file transfer software and virus protection software. The following list indicates the pre-installed software on your system. •...
  • Page 136 Adobe Acrobat Reader The Adobe Acrobat Reader allows you to view, navigate, and print PDF files from across all of the major computing platforms. Norton Internet Security Your system is preinstalled with a free 60-day trial version of Symantec’s Norton Internet Security™. Norton Internet Security is a suite of tools designed to protect your LIFEBOOK notebook from computer viruses, hackers, spyware, and spam.
  • Page 137 OmniPass Fingerprint Application The fingerprint sensor uses Softex OmniPass which provides password management capabilities to Microsoft Windows operating systems. OmniPass lets you use a "master password" for all Windows, applications, and on-line passwords, and presents a convenient user interface through which you can securely manage passwords, users, and multiple identities for each user.
  • Page 138: Glossary

    Glossary AC Adapter A device which converts AC voltage from a wall outlet to the DC voltage needed to power your notebook. Access point Wireless network device used to bridge wireless and wired network traffic. ACPI Advanced Configuration and Power Interface Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen.
  • Page 139 Accelerated Graphics Port. Graphics port specifically designed for graphics-intensive devices, such as video cards and 3D accelerators. Auto/Airline Adapter A device which converts the DC voltage from an automobile cigarette lighter or aircraft DC power outlet to the DC voltage needed to power your LIFEBOOK notebook. BIOS Basic Input-Output System.
  • Page 140 CD-ROM Compact disk read only memory. This is a form of digital data storage which is read optically with a laser rather than a magnetic head. A typical CD-ROM can contain about 600MB of data and is not subject to heads crashing into the surface and destroying the data when there is a failure nor to wear from reading.
  • Page 141 DIMM Dual-in-line memory module. Disk A spinning platter of magnetic data storage media. Disk Drive The hardware which spins the disk and has the heads and control circuitry for reading and writing the data on the disk. Direct Memory Access. Special circuitry for memory to memory transfers of data which do not require CPU action.
  • Page 142 Extended Capability Port. A set of standards for high speed data communication and interconnection between electronic devices. Encryption Key (Network Key) Data encryption key used to encrypt message text and for computing message integrity checks. Data encryption protects data from unauthorized viewing. This device uses the same encryption key to encode and decode the data, and the identical encryption key is required between the sender and receiver.
  • Page 143 IEEE802.11a Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11a devices operate in the 5 GHz lower and middle UNII bands. IEEE802.11b Wireless LAN standard that supports a maximum data rate of 11 Mbps. 802.11b devices operate in the 2.4 GHz ISM band.
  • Page 144 The four numbers in an IP address are used in different ways to identify a particular network and a host on that network. Three regional Internet registries -- ARIN, RIPE NCC and APNIC -- assign Internet addresses from the following three classes. Class A - supports 16 million hosts on each of 126 networks Class B - supports 65,000 hosts on each of 16,000 networks Class C - supports 254 hosts on each of 2 million networks...
  • Page 145 Megabyte. One million bytes. Megahertz 1,000,000 cycles per second. Memory A repository for data and applications which is readily accessible to your LIFEBOOK notebook’s CPU. Megahertz. Modem A contraction for MOdulator-DEModulator. The equipment which connects a computer or other data terminal to a communication line.
  • Page 146 Network name (SSID: Service Set Identifier When a wireless LAN network is configured, grouping is performed to avoid interference or data theft. This grouping is performed with “Network name (SSID)”. In order to improve security, the network key is set allowing no communication unless “Network name (SSID)” coincides with the network key. NTSC National TV Standards Commission.
  • Page 147 Pixel The smallest element of a display, a dot of color on your display screen. The more pixels per area the clearer your image will appear. POST Power On Self Test. A program which is part of the BIOS which checks the configuration and operating condition of your hardware whenever power is applied to your notebook.
  • Page 148 Reset / Restart The act of reloading the operating system. A reset erases all information stored in RAM. Resume To proceed after interruption. In your notebook this refers to returning to active operation after having been in one of the suspension states. Read Only Memory.
  • Page 149 Standby To make inoperative for a period of time. Your LIFEBOOK notebook uses various suspension states to reduce power consumption and prolong the charge of your battery. Status Indicator A display which reports the condition of some portion of your hardware. On your LIFEBOOK notebook this is an LCD screen just above the keyboard.
  • Page 150 Universal Serial Bus. Standard that allows you to simultaneously connect up to 127 USB devices such as game pads, pointing devices, printers, and keyboards to your computer. VRAM Video Random Access Memory. A memory dedicated to video display data and control. Wired for Management is Intel’s broad-based initiative to reduce the total cost of ownership (TCO) of business computing without sacrificing power and flexibility.
  • Page 151: Regulatory Information

    Regulatory Information Notice Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television This equipment has been tested and found to comply with the limit for class B digital devices, pursuant to parts 15 of the FCC Rules.
  • Page 152 If trouble is experienced with this equipment, for repair or warranty information, please refer to the manual or contact Fujitsu America, Incorporated, Customer Service. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
  • Page 153 The equipment cannot be used on public coin service provided by the telephone company. Connection to party line service is subject to state tariffs. (Contact the state public utility commission, public service commission or corporation commission for information). If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this computer does not disable your alarm equipment.
  • Page 154 Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line.
  • Page 155 Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.
  • Page 156: Appendix A: Wlan User's Guide

    Appendix A: WLAN User’s Guide FCC Regulatory Information Please note the following regulatory information related to the optional wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
  • Page 157 cables and equipment other than those specified by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines.
  • Page 158 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu America, Incorporated may invalidate the user's right to operate this equipment.
  • Page 159: Wireless Lan Devices Covered By This Document

    Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and configure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure it's correct operation. Keep this manual in a safe place for future reference.
  • Page 160 Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network.
  • Page 161 Access Point (Infrastructure) Mode Network Wired LAN ADSL modem, Internet cable modem, or similar Access Point* Wireless LAN *An optional hub for a wired LAN may be required depending upon the type of access point used. How to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer.
  • Page 162: Deactivating/Disconnecting The Wlan Device

    • Microwave ovens may interfere with the operation of WLAN devices since they operate in the same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves does not occur with IEEE802.11a radio which operates in the 5 GHz RF band. •...
  • Page 163: Disconnection Using The Icon In The Taskbar

    Disconnection Using the Icon in the Taskbar Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though it’s not connected. Right-click the WLAN icon in the taskbar at the bottom right of your screen. Choose Disconnect from a network.
  • Page 164: Configuring The Wireless Lan

    Configuring the Wireless LAN The optional WLAN device can be configured to establish wireless network connectivity using the software that is built into Windows. Support for most industry standard security solutions is contained in this software. Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters: Configuring the WLAN Click the Start button, then select Control Panel.
  • Page 165: Troubleshooting The Wlan

    Troubleshooting the WLAN Troubleshooting Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Problem Possible Cause Possible Solution Unavailable Incorrect network Ad hoc connection: verify that the network names (SSID’s) and network ...
  • Page 166 Problem Possible Cause Possible Solution Unavailable The computer to be Check if the computer to be connected is turned ON. network  connected is turned connection (continued) RF interference The use of identical or overlapping RF channels can cause interference from Access Points with the operation of the WLAN device.
  • Page 167: Wlan Specifications

    WLAN Specifications Specifications Item Specification Type of network The integrated Intel Centrino Advanced-N 6200 (802.11agn 2x2) and Atheros XSPAN 801.11bgn devices conform to IEEE 802.11a, 802.11b/g, and 802.11n, Wi- Fi based*. Transfer rate (Automatic switching) 54 Mbps maximum data rate (IEEE802.11n to be determined) •...
  • Page 168 * “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed. ** The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective material, or interference from external RF sources.
  • Page 169: Using The Bluetooth Device

    Using the Bluetooth Device The Integrated Bluetooth module is an optional device available for Fujitsu mobile computers. What is Bluetooth Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks (PANs) between devices in short-range of each other.
  • Page 170 Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty.
  • Page 171: Appendix B: Fingerprint Sensor Device

    Appendix B: Fingerprint Sensor Device Introducing the Optional Fingerprint Sensor Device Your system may have an optional fingerprint sensor device below the Touchpad, between the left and right buttons. This also serves as a scroll button. With a fingerprint sensor, you can avoid having to enter a username and password every time you want to: •...
  • Page 172: Getting Started

    The fingerprint sensor uses Softex OmniPass which provides password management capabilities to Microsoft Windows operating systems. OmniPass enables you to use a "master password" for all Windows, applications, and on-line passwords. OmniPass requires users to authenticate themselves using the fingerprint sensor before granting access to the Windows desktop.
  • Page 173 System Requirements The OmniPass application requires space on your hard drive; it also requires specific Operating Systems (OS’s). The minimum requirements are as follows: • Windows XP Professional operating system or later • At least 35 MB available hard disk space Installing the OmniPass Application If OmniPass is already installed on your system, go to “User Enrollment”...
  • Page 174 Verifying Information about OmniPass After you have completed installing OmniPass and restarted your system, you may wish to check the version of OmniPass on your system. To check the version information of OmniPass: From the Windows Desktop, double-click the key-shaped OmniPass icon in the taskbar (usually located in the lower right corner of the screen),...
  • Page 175: User Enrollment

    User Enrollment Before you can use any OmniPass features you must first enroll a user into OmniPass. Master Password Concept Computer resources are often protected with passwords. Whether you are logging into your computer, accessing your email, e-banking, paying bills online, or accessing network resources, you often have to supply credentials to gain access.
  • Page 176 Basic Enrollment The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified otherwise, after OmniPass installation the Enrollment Wizard will launch on Windows login. If you do not see the Enrollment Wizard, you can bring it up by clicking Start on the Windows taskbar; select Programs;...
  • Page 177: Using Omnipass

    knuckle) towards yourself. Swiping too fast or too slow will result in a failed capture. The Choose Finger screen has a [Practice] button; click it to practice capturing your fingerprint. When you are comfortable with how your fingerprint is captured, proceed to enroll a finger. Once OmniPass has successfully acquired the fingerprint, the Verify Fingerprint screen will automatically appear.
  • Page 178 Password Replacement You will often use the password replacement function. When you go to a restricted access website (e.g., your bank, your web-based email, online auction or payment sites), you are always prompted to enter your login credentials. OmniPass can detect these prompts and you can teach OmniPass your login credentials. The next time you go to that website, you can authenticate with your fingerprint to gain access.
  • Page 179 Go to a site that requires a login (username and password), but do not log in yet. At the site login prompt, enter your username and password in the prompted fields, but do not enter the site (do not hit [Enter], [Submit], [OK], or Login).
  • Page 180 Additional Settings for Remembering a Site When OmniPass prompts you to enter a “friendly name” you also have the opportunity to set how OmniPass authenticates you to this site. There are three effective settings for how OmniPass handles a remembered site. The default setting is Automatically click the “OK”...
  • Page 181 Logging in to a Remembered Site Whether or not OmniPass prompts you to authenticate when you return to a remembered site is determined by Settings for this Password Site and can be changed in Vault Management. The following cases are applicable to using OmniPass to login to: Windows, remembered web sites, and all other password protected resources.
  • Page 182 You can view the credentials stored for any remembered website by highlighting the desired resource under Password Protected Dialog and clicking Unmask Values. Should a password be reset, or an account expire, you can remove stored credentials from OmniPass. Highlight the desired resource under Password Protected Dialog and click Delete Page.
  • Page 183 HEN YOU DELETE AN IDENTITY ALL OF ITS ASSOCIATED REMEMBERED SITES AND PASSWORD PROTECTED DIALOGS ARE LOST To set the default identity, highlight the identity you want as default and click [Set as Default]; click [Apply] to ensure the settings are saved. If you log in to OmniPass with a fingerprint device, you will automatically be logged in to the default identity for that OmniPass user.
  • Page 184: Configuring Omnipass

    Configuring OmniPass This section gives an overview of both the Export/Import function and the OmniPass Control Center. Exporting and Importing Users OU CANNOT IMPORT A USER INTO ASS IF THERE ALREADY IS A USER WITH THE SAME NAME ENROLLED IN Using OmniPass Control Center, you can export and import users in and out of OmniPass.
  • Page 185 Click Exports an OmniPass user profile. OmniPass will prompt you to authenticate. Upon successfully authentication, you must name the OmniPass user profile and decide where to save it. An .opi file is generated, and you should store a copy of it in a safe place. This .opi file contains all your user specific OmniPass data, and it is both encrypted and password protected.
  • Page 186: Omnipass Control Center

    • If you attempt to import a user profile who has the same name as a user already enrolled in OmniPass, the OmniPass import function will fail. OmniPass Control Center This section will serve to explain functions within the OmniPass Control Center that weren’t explained earlier.
  • Page 187 EMOVING A USER WILL AUTOMATICALLY DESTROY ALL ASS DATA ASSOCIATED WITH THAT USER LL IDENTITIES AND CREDENTIALS ASSOCIATED WITH THE USER WILL BE LOST ’ F YOU RE SURE YOU WANT TO REMOVE THE USER WE RECOMMEND YOU EXPORT THE USER PROFILE 180 - Introducing the Optional Fingerprint Sensor Device...
  • Page 188 User Settings The User Settings tab has four interfaces: Audio Settings, Taskbar Tips, and Enrollment. User settings allow users to customize OmniPass to suit their individual preferences. Under User Settings (Audio Settings and Taskbar Tips) you can set how OmniPass notifies the user of OmniPass events (e.g., successful login, access denied, etc.).
  • Page 189: Troubleshooting

    Troubleshooting You cannot use OmniPass to create Windows users. You must first create the Windows user, and you will need administrative privileges to do that. Once the Windows user is created, you can add that user to OmniPass using the same username and password Cannot add Windows users to OmniPass If you experience difficulties adding a Windows user to OmniPass, you may need to adjust your local security settings.
  • Page 190 If you are having difficulties due to the first reason, you will need to update OmniPass with your changed Windows account password. Click Update Password and you will be prompted with a dialog to reconfirm your password. Enter the new password to your Windows user account and click OK. If the error persists, then it is unlikely the problem is due to your Windows user account password changing.
  • Page 191: Appendix C: Using Intel® Wireless Display

    Appendix C: Using Intel® Wireless Display Using the Wireless Display technology Intel® Wireless Display (WiDi) is a new technology that is available as an option on selected Fujitsu LIFEBOOK computers. If you have Intel WiDi on your system, please read these instructions and information regarding its use.
  • Page 192: Starting The Widi Application

    • F YOU PURCHASED A SYSTEM WITH AN NTEL WIRELESS AND OPTIONAL NTEL I TECHNOLOGY I APPLICATION MAY OR MAY NOT BE PRE INSTALLED DEPENDING UPOON YOUR SYSTEM CONFIGURATION YSTEMS WITH NTEL I PRE INSTALLED WILL HAVE A I ICON LOCATED ON THEIR DESKTOP F THE ICON IS NOT PRESENT NTEL...
  • Page 193: Index

    Index Bluetooth Where to Find Information About This Guide Built-in Speakers adapter plug adapters CapsLock Anti-theft lock slot CD-ROM Application Panel Click Me! Auto/Airline Adapter Clicking Cold-swapping Configuration Label Battery Controls and Connectors alarm Conventions Used in the Guide care Cursor cold-swapping Cursor Keys...
  • Page 194 Modular Multi-Format DVD Writer removing LAN (RJ-45) Jack Fujitsu Contact Information LifeBook Security Application Panel Fujitsu Driver Update utility buttons Fujitsu LifeBook configuring storing launching applications traveling operating passwords uninstalling...
  • Page 195 Port Replicator attaching Media Player back panel components care connector Control Panel detaching loading Power removing AC adapter Software Auto/Airline adapter using failure Memory indicator capacity management compartment installing problems problems removing sources upgrade module Power Management Microphone Jack Power On Self Test Modular Devices Power/Suspend/Resume Button installing...
  • Page 196 Sleep Mode Specifications Universal Serial Bus Ports Audio Unpacking Chipset 20, 81 Dimensions and Weight problems Environmental Requirements Keyboard Memory Volume control Microprocessor Power Video Warranty Standby Mode WiDi Status Indicator Panel Windows keys Stereo Speakers Application key Start keys Wireless Display Touchpad Wireless LAN...
  • Page 197 Guide d’utilisation Découvrez comment utiliser votre ordinateur portable Fujitsu LIFEBOOK S761...
  • Page 198 © Copyright 2011 Fujitsu America, Incorporated. Tous droits réservés. Aucune partie de cette publication ne peut être copiée, reproduite ou traduite sans le consentement préalable de Fujitsu. Aucune partie de cette publication ne peut être enregistrée ou transmise électroniquement sans le consentement écrit de Fujitsu.
  • Page 199 EGULATORY AND AFETY NFORMATION DÉCLARATION DE CONFORMITÉ selon la partie 15 des règles de la FCC Nom de la partie responsable : Fujitsu America, Incorporated Adresse : 1250 E. Arques Avenue, Sunnyvale, CA 94085 Téléphone : (408) 746-6000 Déclare que le produit : Configuration du modèle de base :...
  • Page 200 CONSIGNES DE SÉCURITÉ IMPORTANTES Pour fonctionner, cet appareil nécessite un adaptateur secteur. Utilisez uniquement un adaptateur de classe 2 pour équipement informatique, homologué UL, avec une sortie nominale de 19 V c.c. et un courant de 4,22 A (80 W). Polarité...
  • Page 201 * Pour commander une nouvelle batterie compatible avec votre ordinateur portable Fujitsu, visitez le site www.shopfujitsu.com si vous résidez aux États-Unis ou www.fujitsu.ca/products/notebooks si vous résidez au Canada. ** La RBRC est une organisation indépendante dont Fujitsu finance une partie des activités de recyclage ; la RBRC n’est en aucune façon affiliée à Fujitsu.
  • Page 202 Conventions utilisées dans ce guide ......8 Coordonnées pour contacter Fujitsu......9 Chapter 1 Présentation de votre ordinateur LIFEBOOK...
  • Page 203 Clavier ............26 Utilisation du clavier.
  • Page 204 Premier démarrage de Windows....... . . 55 Enregistrement de votre LifeBook chez Fujitsu ..... 57 Installation de ClickMe! .
  • Page 205 Cartes Secure Digital (SD) ........73 Insérer des cartes SD .
  • Page 206 Restaurer vos logiciels pré-installés....... 104 Enregistrement de votre image d’origine ......104 Création d’images de sauvegarde de l’image d’origine, du disque ...
  • Page 207 Ports de périphériques......... 129 Clavier.
  • Page 208 Dépannage de la carte réseau sans fil ......161 Dépannage ..........161 Spécifications de la carte réseau sans fil .
  • Page 209: Préface

    Le texte contient plusieurs renvois vers des pages contenant des informations supplémentaires sur un sujet quelconque. Exemple : (« Voir Procédure d’installation en page 43 »). Les éléments des menus à l’écran sont indiqués en caractères gras. Exemple : « Cliquez sur Menu Fujitsu, puis faites votre sélection. »...
  • Page 210: Service Et Assistance

    LES AVERTISSEMENTS Coordonnées pour contacter Fujitsu Service et assistance Plusieurs façons s’offrent à vous pour contacter l’équipe de service et assistance de Fujitsu : • Appel sans frais : 1-800-8Fujitsu (1-800-838-5487) • Site Internet : http://www.computers.us.fujitsu.com/support Avant de nous contacter, veuillez avoir les informations suivantes à portée de main pour que notre préposé...
  • Page 211 VOUS DEVEZ AVOIR UNE CONNEXION NTERNET ACTIVE Garantie limitée Votre ordinateur portable LIFEBOOK est accompagné d’une garantie limitée internationale de Fujitsu. Pour connaître les conditions générales et la durée de votre garantie limitée, consultez la pochette de service livrée avec votre ordinateur.
  • Page 212: Présentation De Votre Ordinateur Lifebook

    Cette section décrit les composants de l’ordinateur portable LIFEBOOK S761 de Fujitsu. Nous vous suggérons de la lire avant de commencer à utiliser l’ordinateur, même si vous avez déjà utilisé des ordinateurs de ce type. Figure 1. Ordinateur portable Fujitsu LIFEBOOK S761...
  • Page 213: Emplacement Des Commandes Et Des Connecteurs

    Emplacement des commandes et des connecteurs Caméra Web Microphone stéréo Voyant de caméra Web Microphone stéréo Écran Tableau de voyants d’état Haut-parleur Sécurité LIFEBOOK/ Dispositif de pointage Touchpad et d’applications Bouton d’alimentation/veille/reprise Haut-parleur stéréo Capteur d’empreintes digitales Clavier Fente pour carte SD Bouton de défilement Tableau de voyants d’état Commutateur Marche/Arrêt du dispositif sans fil...
  • Page 214: Composants Supérieurs

    Composants supérieurs Voici une courte description des composants se trouvant sur le dessus de votre ordinateur LIFEBOOK. Caméra Web La caméra intégrée fonctionne avec une résolution de 2,0 mégapixels. Pour connaître les instructions d’utilisation de la caméra, consultez les fichiers d’aide fournis avec le logiciel de la caméra web. Voyant de caméra Web Le voyant de la caméra Web vous indique si celle-ci est active.
  • Page 215 Bouton de défilement Le bouton de défilement a la forme d’une « fossette » arrondie à droite du pavé tactile. Elle vous permet de parcourir les pages d’un document en déplaçant votre doigt dans le sens que vous souhaitez. Commutateur Marche/Arrêt du dispositif sans fil Ce commutateur permet d’activer/désactiver les dispositifs sans fil en option tels que WLAN et Bluetooth.
  • Page 216: Composants Sur Le Côté Gauche De L'ordinateur

    Prise de micro Port USB 3.0 Prise d’alimentation c.c. Port HDMI Grilles de ventilation Port USB 2.0 avec capacité Prise d’écouteurs de charge USB en tout temps Figure 3. Côté gauche de l’ordinateur LIFEBOOK Composants sur le côté gauche de l’ordinateur Voici une courte description des composants se trouvant sur le côté...
  • Page 217 Prise micro/entrée de ligne La prise micro/entrée de ligne vous permet de connecter un microphone mono externe. Voir « Prise micro/entrée de ligne » en page 83. Prise d’écouteurs/sortie de ligne La prise d’écouteurs/sortie de ligne vous permet de connecter des écouteurs. Voir « Prise d’écouteurs/sortie de ligne »...
  • Page 218: Composants Sur Le Côté Droit De L'ordinateur

    Grilles de ventilation Carte ExpressCard/PC Card Lecteur optique Fente d’antivol Bouton d’éjection Bouton d’ouverture Port USB 2.0 Compartiment multifonction Prise de réseau local (RJ-45) Fente pour carte ExpressCard/PC Card (illustré avec le lecteur optique inséré) Figure 4. Côté droit de l’ordinateur LIFEBOOK Composants sur le côté...
  • Page 219 Port USB 2.0 Les ports USB 2.0 vous permettent de connecter des périphériques USB. La norme USB 2.0 transfère des données à un débit théorique de 480 Mbit/s. Elle est rétrocompatible avec les périphériques USB 1.1 dont le débit atteint 12 Mbit/s. Voir « Ports USB » en page 81. Fente d’antivol La fente de sécurité...
  • Page 220: Composants De La Face Arrière

    Port vidéo externe Figure 5. Face arrière de l’ordinateur portable LIFEBOOK Composants de la face arrière Voici une courte description des composants se trouvant à l’arrière de votre ordinateur LIFEBOOK. Port vidéo externe Le port vidéo externe permet de connecter un moniteur externe ou un projecteur ACL. Voir « Port vidéo externe »...
  • Page 221: Composants Sous L'ordinateur

    Compartiment multifonction Verrou de périphérique Grilles de ventilation (plusieurs emplacements) Module de mémoire Couvercle du filtre Connecteur permet anti-poussière de raccorder Loquet de Loquet de dégagement dégagement de la batterie de la batterie Compartiment de batterie au lithium Figure 6. Dessous de l’ordinateur portable LIFEBOOK Composants sous l’ordinateur Voici une courte description des composants se trouvant sous votre ordinateur LIFEBOOK.
  • Page 222 Compartiment de mémoire supplémentaire Votre ordinateur est équipé en usine d’une mémoire vive synchrone dynamique de type 3 à double débit et à haute vitesse (SDRAM DDR3). Le compartiment de mémoire permet d’augmenter la capacité de mémoire système de votre ordinateur pour en améliorer les performances globales. Voir « Module de mémoire additionnelle »...
  • Page 223: Tableau De Voyants D'état

    Figure 7. Tableau de voyants d’état Tableau de voyants d’état Le tableau de voyants d’état contient des symboles correspondant à divers composants de votre ordinateur LIFEBOOK Fujitsu. Les diodes électroluminescentes (DEL) sous chaque symbole vous renseignent sur le fonctionnement des composants correspondants. Voyant de sécurité...
  • Page 224: Voyant D'accès Au Disque Dur/Lecteur Optique

    Voyant d’accès au disque dur/lecteur optique Le voyant vert d’accès au disque dur révèle si le disque dur interne est en cours d’utilisation. Remarque : Le clignotement est normal. Voyant Verr num Le voyant Verr num indique que le clavier intégré est en mode pavé numérique à dix touches. Voyant Verr maj Le voyant Verr maj indique que le clavier est verrouillé...
  • Page 225 Si la batterie est en cours de charge, le voyant d’alimentation demeure allumé même si l’ordinateur est éteint. Le voyant d’alimentation demeure également allumé si l’un des adaptateurs est connecté et que le système a été fermé à partir de Windows. Voyant de charge de batterie Indique l’état de charge de la ou des batteries.
  • Page 226 • Lorsque la batterie est installée et que l’ordinateur n’est pas sous tension, le voyant de charge de la pile indiquera le niveau de charge pendant cinq secondes après le clignotement orange. • Lorsque l’adaptateur secteur n’est pas branché ou que la batterie n’est pas complètement chargée et que l’ordinateur se trouve en mode veille, le voyant clignote.
  • Page 227: Clavier

    Figure 8. Clavier Utilisation du clavier Votre ordinateur portable Fujitsu LIFEBOOK est doté d’un clavier à 84 touches. Ce clavier exécute toutes les fonctions d’un clavier à 101 touches, y compris les touches Windows et diverses touches de fonction spéciales. Cette section décrit les touches suivantes.
  • Page 228 • Touches de curseur : Votre clavier contient quatre touches fléchées permettant de déplacer le curseur ou le point d’insertion vers la droite, vers la gauche, vers le haut ou vers le bas, dans les fenêtres, dans les applications et dans les documents. •...
  • Page 229 Touches de fonction Votre ordinateur LIFEBOOK comporte 12 touches de fonction, [F1] à [F12]. Les fonctions affectées à ces touches varient selon l’application. Pour les connaître, consultez la documentation du logiciel utilisé. • La touche [Fn] permet d’accéder à des fonctions supplémentaires de votre ordinateur portable. Elle est toujours utilisée conjointement avec une autre touche.
  • Page 230: Pavé Tactile Touchpad/Bouton De Défilement

    Pavé tactile Touchpad /Bouton de défilement Commande du curseur Bouton gauche Défilement/capteur d’empreintes digitales Bouton droit Bouton de défilement Figure 9. Pavé tactile Touchpad Votre ordinateur portable LIFEBOOK possède un pavé tactile Touchpad intégré. Ce dispositif permet de commander le déplacement du pointeur et de sélectionner des éléments affichés à l’écran. Le pavé tactile TouchPad comprend une commande de curseur, un bouton gauche et un bouton droit, ainsi qu’un bouton de défilement/capteur d’empreintes digitales.
  • Page 231 Remarque : le capteur d’empreintes digitales fonctionne également comme capteur de défilement. Après avoir ouvert une session, vous pouvez déplacer votre doigt en haut ou en bas sur le capteur et ce dernier fonctionnera comme un capteur de défilement. Pour savoir comment utiliser le capteur d’empreintes digitales, voir «...
  • Page 232 Double-cliquer Double-cliquer signifie cliquer rapidement, deux fois de suite, avec le bouton gauche. Cette procédure ne fonctionne pas avec le bouton droit. Pour effectuer un double-clic, placez le pointeur sur l’objet voulu et appuyez rapidement deux fois sur le bouton gauche. Vous pouvez également effectuer un double-clic en tapant deux fois légèrement sur le Touchpad.
  • Page 233 Glisser Glisser signifie enfoncer le bouton gauche, sans le relâcher, en déplaçant le curseur. Pour faire glisser un élément, placez d’abord le curseur sur cet élément. Ensuite, enfoncez et tenez le bouton gauche tout en déplaçant l’élément à son nouvel emplacement, puis relâchez.
  • Page 234: Utilisation Du Bouton De Défilement

    Défiler Le bouton de défilement permet de parcourir rapidement des pages sans avoir à utiliser les barres de défilement de la fenêtre. Cette fonction est particulièrement utile lorsque vous naviguez sur des sites Internet. Pour utiliser le capteur, faites glisser votre doigt vers l’avant ou vers l’arrière selon le sens dans lequel vous voulez faire défiler le document.
  • Page 235: Parcourir Avec La Commande Gestuelle

    Parcourir avec la commande gestuelle Le pavé tactile vous permet de faire des agrandissements et rétrécissements sur une page, ou de parcourir rapidement des documents volumineux. Agrandissements : Pour agrandir une page à l’aide du pavé tactile, il suffit de mettre deux doigts sur le pavé et de les éloigner l’un de l’autre (figure 17).
  • Page 236: Réglage Des Commandes Du Pavé Tactile Touchpad

    Activation/désactivation des fonctions gestuelles : Pour activer ou désactiver les fonctions gestuelles, allez à Démarrer > Panneau de configuration > Périphériques (ou Matériel ou Équipement) et Sons. Double-cliquez sur Souris, la fenêtre des propriétés de la souris apparaît alors. Sélectionnez l’onglet Réglages du dispositif puis cliquez sur le bouton Réglages. Pour activer/désactiver le défilement continu : Sélectionnez Défilement virtuel sur le panneau de gauche, cochez Activer le défilement vertical et/ou Activer le défilement horizontal, puis cochez la case «...
  • Page 237 Figure 19. Défilement continu Figure 20. Accélération des mouvements du curseur 36 - Pavé tactile Touchpad/Bouton de défilement...
  • Page 238: Périphériques Pour Le Compartiment Multifonction

    Figure 21. Compartiment multifonction (baie modulaire) Périphériques pour le compartiment multifonction Votre ordinateur portable Fujitsu LIFEBOOK est doté d’un compartiment multifonction (ou baie modulaire). La baie modulaire permet d’insérer un lecteur optique, une batterie au lithium ou un volet réducteur de poids.
  • Page 239 ’ E COMPARTIMENT MULTIFONCTION NE DOIT JAMAIS ÊTRE VIDE LORSQUE L ORDINATEUR EST EN MARCHE I VOUS LA LAISSEZ VIDE DE LA POUSSIÈRE ET DES CORPS ÉTRANGERS PEUVENT ’ ’ INFILTRER DANS L ORDINATEUR Remplacement hors tension Pour remplacer à froid un périphérique modulaire dans le compartiment multifonction, procédez comme suit : Fermez tous les fichiers ouverts.
  • Page 240: Réglage Du Volume

    Réglage du volume Votre ordinateur LIFEBOOK Fujitsu est doté de plusieurs commandes de volume fonctionnant en interaction. ES APPLICATIONS POUVANT REPRODUIRE DES FICHIERS AUDIO PROPOSENT ÉGALEMENT LEUR ). S PROPRE COMMANDE DE VOLUME COMMANDE LOGICIELLE I VOUS INSTALLEZ UN PÉRIPHÉRIQUE ’...
  • Page 241: Tableau De Sécurité Et D'applications Lifebook

    Enter Bouton 3/ [Entrée] Bouton 1/ Gestionnaire Bouton Bouton soutien d’affichage Bouton 2/ Bouton 4/ Utilitaire économiseur Verrouillage de l’écran d’énergie Figure 23. Tableau de sécurité et d’applications LIFEBOOK Tableau de sécurité et d’applications LIFEBOOK Fonction unique aux portables LIFEBOOK, le tableau de sécurité et d’applications vous permet de protéger l’ordinateur contre une utilisation non autorisée.
  • Page 242: Mots De Passe

    Boutons numérotés Utilisez ces boutons pour saisir votre mot de passe. Bouton Entrée Après avoir entré les codes numérotés, appuyez sur ce bouton pour enregistrer le mot de passe dans l’ordinateur LIFEBOOK. Mots de passe Des mots de passe d’utilisateur et de superviseur peuvent être définis sur l’ordinateur. Afin de faciliter la gestion des systèmes, le mot de passe de superviseur est habituellement le même sur tous les portables LIFEBOOK d’un groupe de travail, d’un bureau ou d’une entreprise.
  • Page 243 Sélectionnez Tous les programmes. Sélectionnez Accessoires, puis [Exécuter]. Tapez :  C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE, puis appuyez sur [Entrée]. Suivez les instructions affichées à l’écran pour définir le mot de passe de superviseur. Définition du mot de passe d’utilisateur Allez au menu Démarrer.
  • Page 244: Utilisation Du Tableau De Sécurité Et D'applications De Votre Lifebook

    Utilisation du tableau de sécurité et d’applications de votre LIFEBOOK La fonction de verrouillage de sécurité est activée à la mise hors tension du système, de même qu’à sa reprise depuis le mode veille. Vous devrez entrer le mot de passe juste après avoir appuyé sur le bouton de veille/reprise.
  • Page 245: Mises En Garde

    Mises en garde Ouverture et fermeture du couvercle de l’écran Lorsque le couvercle est fermé, l’ordinateur portable se place automatiquement en mode veille. L’ouverture du couvercle ne met pas automatiquement le portable en mode de fonctionnement normal. C’est pourquoi vous devez entrer le mot de passe de sécurité après avoir enfoncé le bouton d’alimentation/veille/reprise.
  • Page 246 ’ A SUPPRESSION DE L APPLICATION NE SUPPRIME PAS LE MOT DE PASSE ETTE OPÉRATION SUPPRIME ’ SIMPLEMENT LA CAPACITÉ DE MODIFIER AJOUTER ET DE SUPPRIMER DES MOTS DE PASSE ’ CHANGER VOTRE MOT DE PASSE VOUS DEVREZ RÉINSTALLER L APPLICATION Utilisateur : Allez au menu Démarrer, cliquez sur Panneau de configuration.
  • Page 247: Lancement D'applications Avec Le Tableau De Sécurité Et D'applications

    Si vous oubliez les deux mots de passe, communiquez avec le service à la clientèle et de soutien de Fujitsu America au 1-800-8FUJITSU (1-800-838-5487). La société Fujitsu America exige des frais de service pour le déverrouillage d’un PC Tablette protégé par mot de passe. Au moment d’appeler, veuillez avoir sous la main une carte de crédit valide et une preuve de propriété.
  • Page 248 Pour changer l’application associée à un bouton, cliquez sur l’onglet correspondant au bouton à reconfigurer – Application A, par exemple. Cliquez sur l’option Rechercher du menu Démarrer, repérez l’application à lancer avec ce bouton dans la liste et cliquez sur [OK]. Le bouton est dorénavant configuré pour lancer la nouvelle application.
  • Page 249: Chapter 2 Première Mise En Marche De Votre Ordinateur Portable Lifebook

    Première mise en marche de votre ordinateur portable LIFEBOOK Sources d’alimentation Votre ordinateur portable LIFEBOOK Fujitsu peut utiliser trois sources d’alimentation différentes : une batterie au lithium principale, un adaptateur secteur et un adaptateur auto/avion. Connexion des adaptateurs d’alimentation L’adaptateur secteur et l’adaptateur auto/avion disponible en option permettent tous deux de faire fonctionner votre ordinateur portable et de charger les batteries.
  • Page 250 Connexion de l’adaptateur auto/avion disponible en option Branchez le câble de sortie c.c. sur la prise d’alimentation c.c. de votre ordinateur portable. Branchez l’adaptateur auto/avion sur une prise d’allume-cigarette d’un véhicule automobile et placez le contact d’allumage sur la position Marche ou Accessoires,  Branchez l’adaptateur auto/avion sur la prise d’alimentation c.c.
  • Page 251: Écran

    Figure 25. Ouverture de l’écran Écran Votre ordinateur portable LIFEBOOK Fujitsu comporte un écran à rétro-éclairage permettant une lecture facile dans les environnements à forte luminosité. Cet écran offre également une excellente résolution grâce à une technologie de matrice active.
  • Page 252: Réglage De La Luminosité De L'écran

    Réglage de la luminosité de l’écran Lorsque vous avez allumé votre ordinateur portable LIFEBOOK, vous pouvez régler la luminosité de l’écran à un niveau plus confortable. Il y a trois façons d’ajuster la luminosité : en utilisant le clavier, les Options d’alimentation ou le Centre de mobilité Windows. Utilisation du clavier Lorsque vous réglez la luminosité...
  • Page 253: Démarrage De Votre Ordinateur Portable Lifebook

    Démarrage de votre ordinateur portable LIFEBOOK Mise sous tension Bouton d’alimentation/veille/reprise Lorsque votre ordinateur portable est éteint, le bouton d’alimentation/veille/reprise permet de l’allumer. Pour allumer votre ordinateur portable LIFEBOOK, vous devez avoir connecté votre adaptateur secteur ou disposer d’une batterie au lithium chargée. LIFEBOOK, ’...
  • Page 254: Procédure D'amorçage

    BIOS. Chaque fois que vous démarrez ou redémarrez votre ordinateur, il exécute une procédure d’amorçage et l’écran affiche le logo Fujitsu jusqu’à ce que le système d’exploitation soit chargé. Cette procédure comporte diverses opérations dont un auto-test de mise sous tension. Si la procédure d’amorçage est exécutée sans échec et sans demande d’accès à...
  • Page 255: Utilitaire De Configuration Du Bios

    Pour ouvrir l’utilitaire de configuration du BIOS, exécutez les opérations suivantes : Allumez ou redémarrez votre ordinateur portable LIFEBOOK. Pour accéder à l’utilitaire, appuyez sur la touche [F2] lorsque le logo Fujitsu apparaît à l’écran. Le menu principal de l’utilitaire de configuration du BIOS s’affichera avec les paramètres courants.
  • Page 256: Démarrage Du Système

    La première fois que vous allumez votre ordinateur portable LIFEBOOK, l’écran affiche le logo Fujitsu. Si vous n’intervenez pas, l’ordinateur charge le système d’exploitation et lance la procédure d’ouverture Windows.
  • Page 257 Premièrement, vous devrez lire et accepter les contrats de licence d’utilisation. • ’ I VOUS REFUSEZ D ACCEPTER LE CONTRAT DE LICENCE LE SYSTÈME VOUS DEMANDE DE REVOIR LE ’ CONTRAT DE LICENCE ET D Y LIRE LES INFORMATIONS TRAITANT DE LA PROCÉDURE DE RETOUR DE ’...
  • Page 258: Enregistrement De Votre Lifebook Chez Fujitsu

    Utilitaire de mise à jour des pilotes Fujitsu Driver Update  Votre système dispose d’un outil pratique appelé Utilitaire de Mise à jour des pilotes Fujitsu (FDU ou Fujitsu Driver Update). Avec FDU, vous pouvez choisir d’aller automatiquement ou manuellement sur le site de Fujitsu pour obtenir les mises à...
  • Page 259: Gestion De L'alimentation

    Gestion de l’alimentation Votre ordinateur Fujitsu LIFEBOOK possède plusieurs dispositifs permettant d’économiser l’énergie des batteries. Certains de ces dispositifs fonctionnent automatiquement et ne requièrent aucune intervention, notamment en ce qui concerne le modem interne. Cependant, d’autres dépendent de paramètres que vous pouvez configurer en fonction de vos conditions d’utilisation, notamment en ce qui concerne la luminosité...
  • Page 260 • En appuyant sur le bouton d’alimentation/veille/reprise (si l’ordinateur est allumé). • En sélectionnant « Sommeil » après avoir cliqué sur le bouton [Démarrer] puis en cliquant sur la petite flèche située en bas à droite de la fenêtre. • Lorsque le délai d’inactivité est atteint. •...
  • Page 261: Mode Veille Prolongée (Enregistrement Sur Le Disque)

    Mode veille prolongée (enregistrement sur le disque) Le mode veille prolongée enregistre le contenu de la mémoire du système sur le disque dur. Cette fonction peut être activée et désactivée. Activation et désactivation de la fonction de veille prolongée Le mode veille prolongée est activé par défaut. Pour activer ou désactiver la fonction de veille prolongée, exécutez les opérations suivantes : À...
  • Page 262: Mise Hors Tension

    Mise hors tension Avant de mettre l’ordinateur hors tension, assurez-vous que le voyant d’accès au disque dur/lecteur optique est éteint. Si vous arrêtez l’ordinateur alors qu’un disque est en cours d’utilisation, vous risquez de perdre des données. Pour vous assurer que l’ordinateur s’arrête sans erreur, utilisez la procédure d’arrêt Windows. ’...
  • Page 263: Chapter 3 Options Installables Par L'utilisateur

    Chapitre 3 Options installables par l’utilisateur Batterie au lithium Votre ordinateur portable LIFEBOOK possède une batterie au lithium qui en permet le fonctionnement lorsque vous n’avez pas accès à une source d’alimentation externe. Cette batterie est robuste et durable, mais elle ne doit pas être exposée à des températures extrêmes, à des tensions élevées, à des produits chimiques ou à...
  • Page 264: Procédure De Recharge Des Batteries

    • L’ ’ AUTONOMIE RÉELLE DE LA BATTERIE PEUT VARIER SELON LA LUMINOSITÉ DE L ÉCRAN SELON LES ’ APPLICATIONS LES FONCTIONS ET LES PARAMÈTRES DE GESTION DE L ALIMENTATION QUE VOUS ’ ’ UTILISEZ SELON L ÉTAT DE LA BATTERIE ET SELON D AUTRES PRÉFÉRENCES QUE VOUS POUVEZ .
  • Page 265 L’ ’ UTILISATION DE PÉRIPHÉRIQUES ÉNERGIVORES TELS QUE LE MODEM OU L ACCÈS FRÉQUENT DVD/CD-RW/CD-ROM AU LECTEUR DE PEUVENT EMPÊCHER UNE RECHARGE COMPLÈTE Batterie faible Lorsque la batterie est faible, le système affiche un avis de batterie faible. Si vous ne prêtez pas attention à...
  • Page 266: Remplacement De La Batterie

    Remplacement de la batterie Si vous achetez une batterie supplémentaire de rechange, vous pourrez remplacer la batterie principale si elle vient à se décharger complètement. Deux méthodes s’offrent à vous pour remplacer votre batterie : le remplacement hors tension et le remplacement sous tension. Remplacement hors tension Pour remplacer la batterie alors que le système est hors tension, exécutez les opérations suivantes : Trouvez une batterie chargée, prête à...
  • Page 267 Point de soulèvement Batterie au lithium Verrou de la batterie Loquet de la batterie Figure 26. Déverrouillage de la batterie Figure 27. Retrait de la batterie 66 - Batterie au lithium...
  • Page 268: Lecteur Optique

    Plateau du lecteur multimédia Ouverture d’urgence du plateau Touche d’éjection du lecteur multimédia Figure 28. Lecteur optique Lecteur optique De nombreux supports peuvent être utilisés avec votre système si vous avez le graveur de DVD multiformat en option. Le lecteur est également connu sous le nom de « lecteur optique ». Les disques DVD-R et DVD-RW ont une capacité...
  • Page 269: Logiciels Du Lecteur Multimédia

    Tirez doucement le plateau de chargement jusqu’à ce qu’un disque puisse y être déposé facilement. • ’ ISITEZ RÉGULIÈREMENT LE SITE EB DE UJITSU À L ADRESSE US FUJITSU COMPUTERS POUR OBTENIR LES MISES À JOUR DE PILOTES LES PLUS RÉCENTES • DVD LIFEBOOK OUS LES LECTEURS DE SONT COMPATIBLES AVEC LES TITRES DE DONT LE NUMÉRO DE RÉGION EST...
  • Page 270 Placez le disque dans le plateau de chargement, l’étiquette vers le haut, avec l’orifice au milieu du disque. Enfoncez le disque dans le cercle surélevé situé au centre du plateau. Fermez le plateau de chargement en le poussant doucement jusqu’à ce que vous entendiez un clic. ’...
  • Page 271: Retrait D'un Disque

    Retrait d’un disque Appuyez et relâchez la touche d’éjection située à l’avant du lecteur optique. Le lecteur s’arrêtera et le plateau sortira légèrement de l’ordinateur LIFEBOOK. Tirez doucement le plateau jusqu’à ce le disque puisse en être facilement retiré. Retirez doucement le disque du plateau de chargement. Fermez le plateau de chargement en le poussant doucement jusqu’à...
  • Page 272: Utilisation Du Lecteur Multimédia Avec Alimentation Par Batterie

    Cliquez sur [OK] pour fermer la boîte de dialogue « À propos du lecteur de DVD », et le film commencera. Ouverture du panneau de configuration du lecteur multimédia. La plupart des DVD-ROM vous permettent de modifier la façon dont le film est visionné et ce que vous aimeriez voir.
  • Page 273 VOUS POUVEZ VOUS EN PROCURER UNE SOIT 1-877-372-3473. EN LIGNE À HTTP COMPUTERS FUJITSU SOIT EN APPELANT AU Pour regarder un film avec une alimentation par batterie : Ayez à votre disposition une batterie supplémentaire chargée à fond ou un adaptateur secteur.
  • Page 274: Cartes Secure Digital (Sd)

    Carte Secure Digital Fente pour carte Secure Digital Figure 31. Installer une carte Secure Digital Cartes Secure Digital (SD) Votre ordinateur portable LIFEBOOK peut accueillir des cartes Secure Digital (SD), sur lesquelles vous pouvez stocker et transférer des données vers et à partir de divers dispositifs numériques. Ces cartes utilisent une architecture de mémoire flash, ce qui veut dire que vous n’avez pas besoin d’une source d’énergie pour conserver les données.
  • Page 275: Retirer Une Carte Sd

    Avant d’insérer votre carte, assurez-vous qu’aucune autre carte n’est déjà installée dans la fente. Si c’est le cas, consultez la rubrique Retirer une carte SD. Enfoncez la carte dans la fente, étiquette vers le haut. Poussez fermement la carte dans la fente jusqu’à ce qu’elle soit logée dans le connecteur. Retirer une carte SD Pour retirer une carte SD, enfoncez-la jusqu’à...
  • Page 276: Utilisation Des Cartes Expresscard/Pc Card

    Bouton d’éjection Carte PC Card Carte ExpressCard Figure 32. Installation/Retrait de cartes ExpressCard ou PC Card Utilisation des cartes ExpressCard/PC Card Selon la configuration de votre système, votre ordinateur LIFEBOOK peut soit fonctionner avec des ExpressCard, soit avec des PC Card ; elles ont chacune leurs propres fonctions. Il existe deux largeurs différentes de cartes ExpressCard : 34mm et 54mm.
  • Page 277: Installation Des Cartes Expresscard/Pc Card

    Installation des cartes ExpressCard/PC Card • PC C I VOUS NSÉREZ OU RETIREZ UNE CARTE XPRESS ARD OU ARD PENDANT LE PROCESSUS ’ ’ ARRÊT OU DE DÉMARRAGE DE VOTRE ORDINATEUR PORTABLE VOUS RISQUEZ D ENDOMMAGER ’ LA CARTE ET OU L ORDINATEUR •...
  • Page 278: Retrait Des Cartes Expresscard/Pc Card

    Retrait des cartes ExpressCard/PC Card Le guide d’utilisation de votre carte ExpressCard/PC Card vous indiquera comment la retirer. Certaines cartes pourraient nécessiter que votre ordinateur portable LIFEBOOK soit en mode veille ou qu’il soit éteint pendant que vous les retirez. •...
  • Page 279: Module De Mémoire Additionnelle

    Module de mémoire additionnelle Votre ordinateur portable Fujitsu LIFEBOOK est livré avec une mémoire vive dynamique synchrone de type 3, à haute vitesse et à double débit binaire, de 2 Go (SDRAM DDR3-1333), installée en usine. Pour augmenter la capacité de mémoire de votre portable, vous pouvez installer un module de mémoire additionnel.
  • Page 280 Insérez le module de mémoire additionnelle en oblique, à 45°. Poussez fermement le bord du connecteur du module vers le bas et appuyez sur le connecteur jusqu’à ce qu’il se loge sous la clé de serrage. Vous entendrez un clic lorsque celui-ci sera bien en place. Replacez le couvercle et les vis.
  • Page 281: Retrait D'un Module De Mémoire Additionnelle

    ’ E MODULE DE MÉMOIRE ADDITIONNELLE N EST PAS UN ÉLÉMENT QUE VOUS RETIREZ DE VOTRE ’ ORDINATEUR DE FAÇON ROUTINIÈRE PRÈS L INSTALLATION VOUS DEVRIEZ LE LAISSER EN PLACE ’ JUSQU À CE QUE VOUS DÉCIDIEZ DE CHANGER LA CAPACITÉ DE MÉMOIRE DU SYSTÈME Retrait d’un module de mémoire additionnelle Exécutez les étapes 1 à...
  • Page 282: Ports De Périphériques

    Ports de périphériques Votre ordinateur portable LIFEBOOK et le duplicateur de ports optionnel sont équipés de plusieurs ports auxquels vous pouvez brancher des dispositifs externes tels que : lecteurs de disque, claviers, modems, imprimantes, etc. Ports USB Les ports Universal Serial Bus 2.0 (USB) vous permettent de connecter divers périphériques USB tels que des tablettes de jeu externes, des dispositifs de pointage, des claviers et/ou des haut-parleurs.
  • Page 283: Port Hdmi

    Port HDMI Le port HDMI (High-Definition Multimedia Interface, ou Interface multimédia à haute définition) est une interface numérique audio/vidéo permettant de faire transiter des flux de données non compressées. Le port HDMI sert à brancher des périphériques numériques compatibles avec votre ordinateur (un téléviseur grand écran, par exemple).
  • Page 284 veuillez consulter votre administrateur de réseau). Pour brancher le câble de réseau local, exécutez ces opérations simples : Alignez le connecteur avec l’ouverture du port. Poussez la fiche de connexion dans le port jusqu’à ce qu’elle s’enclenche. Branchez l’autre extrémité du câble sur une prise de réseau local.
  • Page 285: Port Vidéo Externe

    Port vidéo externe Le port vidéo externe vous permet de connecter un moniteur externe ou un projecteur ACL. Pour connecter un périphérique vidéo externe, effectuez ces opérations simples : Alignez le connecteur avec l’ouverture du port. Poussez la fiche de connexion dans le port jusqu’à...
  • Page 286: Prise D'écouteurs/Sortie De Ligne

    Prise d’écouteurs/sortie de ligne La prise d’écouteurs/sortie de ligne vous permet de connecter à votre ordinateur des écouteurs ou des haut- parleurs externes sous tension. Vos écouteurs ou haut-parleurs doivent être munis d’une mini-prise stéréo de 3,5 mm (1/8 po). Pour connecter des écouteurs ou des haut-parleurs, exécutez ces opérations simples : Alignez le connecteur avec l’ouverture du port.
  • Page 287: Duplicateur De Ports

    Duplicateur de ports Le duplicateur de ports augmente la fonctionnalité de votre ordinateur LIFEBOOK en ajoutant des ports de connexion pour un moniteur VGA externe, un câble de réseau local (RJ-45) quatre périphériques USB 2.0, un périphérique DVI-D, un périphérique eSATA, un périphérique en parallèle, un périphérique en série, des écouteurs et une alimentation c.c.
  • Page 288: Composants Du Duplicateur De Ports

    Composants du duplicateur de ports Voici une courte description des composants se trouvant à l’arrière du duplicateur de ports (figure 40). Bouton d’alimentation Le bouton d’alimentation permet de mettre en marche et d’arrêter le duplicateur de ports. Prise d’écouteurs/sortie de ligne La prise d’écouteurs/sortie de ligne vous permet d’écouter en stéréo le son émanant de votre ordinateur grâce à...
  • Page 289: Connecteur Pour Duplicateur De Ports

    Prise de réseau local (RJ-45) La prise de réseau local vous permet de connecter un câble de réseau local au duplicateur de ports. Veuillez prendre note que si un duplicateur de ports est installé, vous devez utiliser la prise de réseau local du duplicateur de ports, pas celle de l’ordinateur.
  • Page 290: Installation Du Duplicateur De Ports

    Installation du duplicateur de ports Pour installer le duplicateur de ports, alignez le port de connexion du duplicateur de ports sous votre ordinateur portable avec le connecteur sur le duplicateur de ports, puis enfoncez simultanément les coins (figure 41). Figure 41. Installation du duplicateur de ports Désinstallation du duplicateur de ports Pour enlever le duplicateur de ports : Pour séparer le duplicateur de ports de votre ordinateur portable, tirez le loquet de séparation à...
  • Page 291 (figure 43). Séparez l’ordinateur du duplicateur de ports. Le duplicateur est enlevé Loquet d’ouverture Figure 42. Déverrouillage du duplicateur de ports Figure 43. Retrait du système 89 - Duplicateur de ports...
  • Page 292: Chapter 4 Dépannage De Votre Lifebook

    Chapitre 4 Dépannage de votre LIFEBOOK Dépannage Il est possible que vous rencontriez parfois des problèmes simples de configuration ou d’exploitation pouvant être résolus sur le champ, ou des problèmes au niveau d’un périphérique pouvant être résolus en remplaçant l’équipement. Les informations contenues dans cette section vous aideront à isoler et résoudre certains de ces problèmes simples et à...
  • Page 293 : Numéro sans frais : 1-800-8Fujitsu (1-800-838-5487)  site Web : http://www.fujitsu.com/us/support/. Avant de nous contacter, veuillez avoir les informations suivantes à portée de main pour que notre préposé du service à la clientèle puisse vous venir en aide le plus rapidement possible : •...
  • Page 294: Problèmes Spécifiques

    Problèmes spécifiques Utilisation du tableau de dépannage Lorsque vous éprouvez des problèmes avec votre ordinateur portable LIFEBOOK, essayez de trouver les symptômes sous la colonne Problème du tableau suivant pour la fonction qui vous cause des problèmes. Vous trouverez une description des causes communes pour ce symptôme sous la colonne Cause possible ;...
  • Page 295: Problèmes Audio

    Problème Cause possible Solutions possibles Problèmes audio Aucun son ne sort des Le volume est réglé à un niveau Utilisez la combinaison de touches [Fn+F9] sur votre clavier haut-parleurs incorporés. très bas. pour modifier le volume. Gardez la touche [Fn] enfoncée et appuyez plusieurs fois sur [F9] pour augmenter le volume sonore de l’ordinateur.
  • Page 296: Problèmes De Disque Dur

    Problème Cause possible Solutions possibles L’ordinateur portable Mauvais logiciel lecteur de Installez un logiciel de lecture de DVD (Pour de plus amples LIFEBOOK ne reconnaît DVD ou aucun logiciel lecteur informations, voir « Logiciels du lecteur multimédia » en pas les DVD/CD-RW/ de DVD installé.
  • Page 297: Problèmes De Mémoire

    Problème Cause possible Solutions possibles Vous avez installé un Votre périphérique externe n’est Réinstallez votre périphérique. Voir « Ports de périphériques » clavier ou une souris pas bien installé. en page 81. externe et il/elle ne Le logiciel de votre système Consultez la documentation du périphérique et du système semble pas fonctionner.
  • Page 298: Problèmes De Carte Express Card

    Problème Cause possible Solutions possibles Problèmes de carte Express Card Une carte insérée dans La carte est mal installée. Retirez et réinstallez la carte. Voir « Utilisation des cartes la fente pour carte ExpressCard/PC Card » en page 75. PC/Express Card ne Votre logiciel pourrait ne pas Consultez la documentation relative à...
  • Page 299 Problème Cause possible Solutions possibles Lorsque vous allumez le L’adaptateur de courant (secteur Branchez le cordon d’alimentation secteur dans une autre LIFEBOOK, rien ne ou auto/avion) ne reçoit pas prise murale et vérifiez si un interrupteur ou un disjoncteur semble se produire. d’énergie de la prise secteur, coupe le courant.
  • Page 300: Problèmes D'arrêt Et De Démarrage

    Configurez la source d’exploitation en appuyant sur la touche pas à charger le système l’utilitaire de configuration du BIOS [Échap] pendant que le logo Fujitsu est affiché sur l’écran ou d’exploitation. sont incompatibles avec votre utilisez la touche [F2], accédez à l’utilitaire de configuration et configuration.
  • Page 301: Problèmes Vidéo

    Problème Cause possible Solutions possibles Le système se met en Vous avez un système protégé qui Assurez-vous d’avoir le bon mot de passe. Accédez à l’utilitaire marche et affiche les requiert un mot de passe pour de configuration et vérifiez les paramètres de sécurité, puis informations de mise en charger votre système modifiez-les en conséquence.
  • Page 302 Problème Cause possible Solutions possibles L’écran d’affichage L’ordinateur portable est réglé pour Gardez la touche [Fn] enfoncée et appuyez sur la touche [F10] intégré demeure vide fonctionner avec un moniteur pour changer votre sélection et choisir où envoyer votre lorsque vous mettez en externe seulement.
  • Page 303: Problèmes Divers

    Problème Cause possible Solutions possibles L’écran affiche des zones Si ces zones sont très petites et si Ne faites rien. claires ou sombres. leur nombre est restreint, cela est normal pour un grand écran ACL. Si les zones sont nombreuses L’écran est défectueux : communiquez avec le service ou suffisamment grandes pour d’assistance.
  • Page 304: Messages De L'auto-Diagnostic De Mise Sous Tension

    Messages de l’auto-diagnostic de mise sous tension Voici une liste des messages d’erreur et d’état que le BIOS Phoenix et/ou votre système d’exploitation peuvent générer ainsi qu’une explication pour chacun d’eux. Les messages d’erreurs sont marqués d’un *. Si un message d’erreur est affiché et ne se trouve pas dans la liste, prenez-le en note et vérifiez-le dans la documentation du système d’exploitation (à...
  • Page 305 Communiquez avec le service d’assistance. *Erreur de ventilateur, le système s’arrêtera dans 30 secondes. Contactez le service de support technique Fujitsu. Une erreur de ventilateur s’est produite. Communiquez avec votre représentant commercial. *Une erreur de ventilateur s’est produite durant l’amorçage.
  • Page 306: Restaurer Vos Logiciels Pré-Installés

    Restaurer vos logiciels pré-installés Avant de commencer à utiliser votre ordinateur, il est très important de copier sur DVD l’image d’origine de votre système. Pour cela, suivez les instructions indiquées dans la section « Enregistrement de votre image d’origine » ci-dessous. Outre les instructions sur l’enregistrement de votre image d’origine, ce document explique plusieurs autres procédures importantes, notamment la création d’une image de système, la restauration de l’image d’origine et des images de système, la gestion de vos images et...
  • Page 307: Création D'images De Sauvegarde De L'image D'origine, Du Disque Pra Et D'autres Disques

    Après avoir installé l’utilitaire ClickMe! lors du premier démarrage de votre système, une invite vous demandera de faire une copie de l’image d’origine sur des DVD. Plusieurs disques vierges (les DVD-R ou DVD+R sont recommandés) vous seront nécessaires pour créer la copie. Lorsque vous avez terminé la copie, assurez-vous d’étiqueter clairement les disques et de les conserver en lieu sûr.
  • Page 308: Restauration De Votre Image D'origine

    Répétez la procédure avec les trois autres disques d’images (disque d’amorçage, disque de pilotes et de restauration d’applications, disque d’applications). Le nombre d’images disponibles peut varier selon le modèle du système ; sur certains modèles, les applications ne sont pas chargées sur le disque dur. Restauration de votre image d’origine Si vous avez un jour besoin de restaurer votre image d’origine, exécutez les opérations suivantes.
  • Page 309 Après le redémarrage, vous voyez apparaître une fenêtre « Création de l’image de sécurité » vous proposant de « Créer l’image sur l’unité de disque D » ou de « Sélectionner une unité de disque » pour le cas où vous préféreriez conserver l’image sur un disque dur externe.
  • Page 310: Gestion De Vos Images De Sauvegarde

    Gestion de vos images de sauvegarde L’outil MyRecovery permet également de copier vos images de sauvegarde, de les archiver sur des DVD, ou de les supprimer de votre disque dur lorsqu’elles n’y sont plus utiles. Tout d’abord, cliquez sur l’icône [MyRecovery] de votre bureau Windows. Dans la fenêtre MyRecovery, cliquez sur [Gérer/Créer].
  • Page 311 Comment déterminer si la fonctionnalité Restauration et Utilitaires est déjà installée Allumez ou redémarrez votre système. Lorsque le logo Fujitsu apparaît, appuyez sur la touche [F12]. Dans le menu Amorçage qui apparaît, vérifiez si l’option est présente. Si elle n’y est pas, cela signifie que la fonctionnalité...
  • Page 312 E DISQUE PEUT SEULEMENT ÊTRE UTILISÉ SUR LE SYSTÈME AVEC LEQUEL IL A ÉTÉ ACHETÉ Mettez le système sous tension. Lorsque le logo Fujitsu apparaît à l’écran, appuyez sur la touche [F12]. Dans le menu qui apparaît, sélectionnez le menu Amorçage.
  • Page 313 Onglet Restauration : L’onglet Restauration comprend trois outils : « Restauration de copies de système configurées par l’utilisateur », « Restauration de l’image d’origine (uniquement l’unité de disque C:) » et « Restauration de l’image d’origine (restauration intégrale du disque dur) ». Vous pouvez utiliser ces outils pour restaurer l’image d’origine à...
  • Page 314: Récupération De L'image D'origine Avec Restauration Et Utilitaires

    Veuillez prendre note que vous devez d’abord créer de nouvelles partitions sur le disque dur, puis restaurer l’image d’origine. Mettez le système sous tension. Lorsque le logo Fujitsu apparaît à l’écran, appuyez sur la touche [F12]. Dans le menu qui apparaît, sélectionnez le menu Amorçage.
  • Page 315 2. La mention « Initialisation du disque dur » s’affichera en gras avec le message « Veuillez insérer le disque amorçable dans le lecteur optique ». Insérez le disque amorçable. Cliquez sur [Suivant] pour continuer. Une boîte de dialogue s’affiche, avec un message de vérification de disque. Le message «...
  • Page 316: Téléchargement Automatique Des Mises À Jour De Pilotes

    Téléchargement automatique des mises à jour de pilotes Votre système dispose d’un outil pratique appelé Utilitaire de Mise à jour des pilotes Fujitsu (FDU ou Fujitsu Driver Update). Avec FDU, vous pouvez choisir d’aller automatiquement ou manuellement sur le site de Fujitsu pour obtenir les mises à jour récentes de votre système.
  • Page 317: Chapter 5 Entretien

    Entretien Entretien de votre ordinateur portable LIFEBOOK Si vous prenez soin de votre ordinateur portable LIFEBOOK Fujitsu, vous augmenterez sa durée de vie et sa fiabilité. Cette section fournit certains conseils relatifs à l’entretien de votre ordinateur portable et de ses dispositifs.
  • Page 318 • Votre ordinateur portable LIFEBOOK est durable, mais c’est un appareil électronique sensible. Traitez-le avec respect et précaution. • Prenez l’habitude de transporter votre ordinateur dans une mallette convenable. • N’essayez pas de réparer l’ordinateur vous-même. Suivez toujours les instructions d’installation à...
  • Page 319: Nettoyage De Votre Ordinateur Portable Lifebook

    • Si vous transportez votre LIFEBOOK dans un porte-documents, ou toute autre mallette,  assurez-vous qu’aucun objet dans l’étui n’appuie sur le couvercle. • Ne placez jamais votre ordinateur portable de façon à ce que le lecteur optique supporte le poids du portable.
  • Page 320 Écran ACL Pour nettoyer l’écran ACL, utilisez l’un des nettoyants suivants : • Kit de nettoyage pour ordinateur portable Office Depot® N° 154-616 • Lingettes Meridrew Enterprises Klear_Screen® Remarque : Nettoyez l’écran doucement et laissez-le sécher avant d’allumer votre ordinateur. Désinfection des ordinateurs LIFEBOOK •...
  • Page 321: Nettoyage Du Filtre Anti-Poussière

    Nettoyage du filtre anti-poussière Votre LIFEBOOK est équipé de ventilateurs qui attirent l’air à l’intérieur pour refroidir les composants internes de l’ordinateur. Selon l’environnement d’utilisation, de la poussière et de la saleté peuvent pénétrer avec l’air. Si elles s’accumulent, elles peuvent nuire au bon fonctionnement du système. •...
  • Page 322: Rangement De Votre Ordinateur Portable Lifebook

    SSUREZ VOUS TOUJOURS QUE LE FILTRE ANTI POUSSIÈRE EST INSTALLÉ AVANT DE METTRE VOTRE SYSTÈME EN MARCHE ANS LE CAS CONTRAIRE VOUS RISQUEZ DE CONTAMINER VOTRE SYSTÈME ’ ET DE L ENDOMMAGER Rangement de votre ordinateur portable LIFEBOOK • Si vous entreposez votre LIFEBOOK durant un mois ou plus, éteignez-le, chargez complètement les batteries au lithium, puis enlevez-les et rangez-les.
  • Page 323 • Apportez avec vous les adaptateurs de fiches nécessaires lorsque vous voyagez outre-mer. Vérifiez le diagramme suivant pour déterminer quel adaptateur de fiche vous serait nécessaire ou renseignez-vous auprès de votre agent de voyage. Type de prise Emplacement Type de prise Emplacement Royaume-Uni, Irlande, Canada, États-Unis, Mexique, certains pays...
  • Page 324: Entretien De Votre Lecteur Multimédia

    • Ne laissez pas les batteries dans des endroits chauds pendant plus d’une journée ou deux. Les grandes chaleurs risquent de raccourcir la durée de vie de votre batterie. • Ne rangez pas la batterie pendant plus de 6 mois sans la recharger. Augmenter la durée de vie des batteries •...
  • Page 325 • Ne renversez pas de liquide sur les disques multimédias. • N’égratignez pas les disques multimédias. • Ne laissez pas la poussière s’accumuler sur les disques multimédias. • N’écrivez jamais sur la surface de l’étiquette avec un stylo à bille ou un crayon. Utilisez toujours un crayon-feutre.
  • Page 326: Cartes Expresscard/Pc Card

    Cartes ExpressCard/PC Card Entretien de vos cartes Les cartes ExpressCard et PC Card sont durables, mais vous devez en prendre soin. La documentation fournie avec votre carte vous donnera des renseignements spécifiques, mais vous devriez aussi faire attention aux points suivants : •...
  • Page 327: Chapter 6 Spécifications Techniques

    Spécifications techniques du système Cette partie présente les spécifications techniques du matériel et de l’environnement de votre ordinateur portable LIFEBOOK Fujitsu. Selon les configurations, les spécifications techniques peuvent varier. Étiquette de configuration L’étiquette de configuration qui est située sur le dessous de votre ordinateur portable comporte des informations spécifiques à...
  • Page 328: Microprocesseur

    Microprocesseur La nouvelle famille de processeurs Intel® Core™ de 2e génération. (Le type de votre processeur est indiqué sur l’étiquette du système.) Puce Intel QM67 (vPro) ou Intel HM65 (non vPro) Mémoire Mémoire système • Module de mémoire vive à double canal SDRAM DDR3 1333 MHz •...
  • Page 329: Audio

    Mémoire vive vidéo • Graphiques Intel® HD avec fréquence dynamique. Distribution automatique de puissance informatique à l’UC et aux applications graphiques ayant besoin d’un surplus de puissance • Carte NVIDIA® GeForce® GT520M avec mémoire GDDR3 de 1 Go Audio • Codec Realtek ALC269 avec système audio haute définition (HD) à deux canaux. •...
  • Page 330: Caractéristiques Techniques

    Caractéristiques techniques Dispositif de pointage intégré • Pavé tactile Touchpad • Bouton de défilement Communications • Réseau local : 1 carte réseau local Gigabit Ethernet Réseau local sans fil • Carte intégrée Intel Centrino Advanced-N 6200 (802.11agn 2x2), ou carte  Atheros XSPAN 801.11bgn •...
  • Page 331: Ports De Périphériques

    Ports de périphériques Sur le portable LIFEBOOK : • Une fente pour carte PC Card ou ExpressCard • Fente pour carte Secure Digital (SD) • Connecteur D-SUB 15 broches pour moniteur VGA externe • Trois connecteurs USB (Universal Serial Bus) pour périphériques en entrée/sortie : Un port USB 2.0 standard, un port USB 2.0 avec capacité...
  • Page 332: Alimentation

    • Un bouton d’alimentation/veille/reprise Clavier Clavier intégré avec toutes les fonctions de claviers compatibles PS/2 de 101 touches. • Nombre total de touches : 84 • Touches de fonction : De F1 à F12 • Touches supplémentaires : Fn • Deux touches Windows : Une touche Démarrage, une touche Applications •...
  • Page 333: Dimensions Et Poids

    Altitude Utilisation : 3 048 m (10 000 pieds) maximum Accessoires préférés des utilisateurs Pour commander des accessoires Fujitsu ou obtenir des renseignements supplémentaires, visitez le site www.shopfujitsu.com ou composez le 1-800-FUJITSU. 131 - Spécifications techniques du système...
  • Page 334: Logiciels Pré-Installés

    Logiciels pré-installés Selon votre système d’exploitation préinstallé, votre ordinateur est livré avec des logiciels inclus afin de vous permettre d’écouter des fichiers audio et de visionner des fichiers vidéo de formats divers. De plus, un logiciel de transfert de fichiers et un logiciel anti-virus sont fournis. La liste suivante indique les logiciels fournis avec votre système.
  • Page 335 Adobe Acrobat Reader Adobe Acrobat Reader vous permet de visualiser, de naviguer et d’imprimer des fichiers « pdf » à partir des principales plates-formes informatiques. Norton Internet Security Votre système est livré avec la version d’essai de 60 jours de Norton Internet Security™ de Symantec. La gamme d’outils Norton Internet Security est conçue pour protéger votre ordinateur portable LIFEBOOK contre les virus, les pirates, les espions et les pourriels.
  • Page 336 La barre d’outils Google vous permet d’effectuer des recherches rapides sur Internet, de bloquer les fenêtres et de réaliser une gamme variée de tâches pour rendre votre utilisation d’Internet plus facile et plus plaisante. OmniPass (application de reconnaissance des empreintes digitales) Le capteur d’empreintes digitales utilise le logiciel Softex OmniPass qui fournit des fonctions de gestion de mot de passe aux systèmes d’exploitation Microsoft Windows.
  • Page 337: Glossaire

    Glossaire Adaptateur secteur Appareil convertissant latension c.a. provenant d’une prise murale en tension c.c. nécessaire à l’alimentation de votre ordinateur portable. Affichage à cristaux liquides. Type d’écran produisant des images par contrôle de l’orientation de cristaux dans un liquide cristallin. ACPI (Advanced Configuration and Power Interface) Interface avancée de configuration et de gestion de l’énergie.
  • Page 338 Au sein d’un réseau isolé, vous pouvez attribuer des adresses IP au hasard tant que chacune d’elles reste unique. Toutefois, la connexion d’un réseau privé à Internet exige l’utilisation d’adresses IP enregistrées (appelées adresses Internet) afin d’éviter les doublons. Les quatre numéros dans une adresse IP sont utilisés de différentes façons pour identifier un réseau particulier et un serveur hôte.
  • Page 339 Authentification à clé partagée Méthode d’authentification réseau établie par la spécification 802.11, selon laquelle le point d’accès transmet au client un paquet texte que le client doit crypter avec la bonne clé de réseau et renvoyer au point d’accès. Si le client possède la mauvaise clé ou s’il n’en a pas, l’authentification échouera et il ne sera pas autorisé à s’associer au point d’accès.
  • Page 340 Canal Plage de fréquences à bande étroite utilisée par la carte réseau sans fil pour transmettre des données. IEEE 802.11b/g : 11 canaux dans la bande de 22 MHz. Cathodique (CRT – Cathode Ray Tube, ou Tube à rayons cathodiques) Tube à...
  • Page 341 Configuration Éléments matériels et logiciels qui composent le système et en définissent son fonctionnement. Décharge électrostatique. Décharge électrostatique soudaine provenant d’une charge statique qui s’est accumulée lentement. Exemple : la décharge reçue d’une poignée de porte ou les étincelles générées par un brossage des cheveux par temps sec.
  • Page 342 DNS (Domain Name System) Système d’adressage par domaines Fonction qui contrôle la correspondance entre l’adresse IP et le nom attribué à l’ordinateur. Il est possible de communiquer avec les ordinateurs dont les adresses IP sont inconnues, mais dont le nom est connu. Données Les informations stockées et traitées par un système.
  • Page 343 IDE (Intelligent Drive Electronics) Interface IDE Type d’interface dans laquelle le contrôleur électronique du disque dur est intégré dans le même boîtier que ce dernier. IEEE 802.11a Norme de réseau sans fil autorisant un débit maximum théorique de 54 Mbit/s. Les cartes de norme 802.11a fonctionnent dans les bandes de fréquences UNII inférieures et intermédiaires de 5 GHz.
  • Page 344 Lecteur de disque Dispositif qui fait tourner le disque et qui contient les têtes et les circuits de commande permettant la lecture et l’écriture de données sur le disque. Masque de sous-réseau Le réseau TCP/IP est commandé à l’aide d’une division en plusieurs sous-réseaux. Une adresse IP se compose d’une adresse de sous-réseau et de l’adresse de l’ordinateur.
  • Page 345 Modem Contraction de « MOdulateur-DEModulateur ». L’appareil qui relie un ordinateur ou un autre terminal de traitement de données à une ligne de télécommunication. Module RAM ou module de mémoire vive Carte de circuit imprimé avec mémoire et circuit associé qui permet à l’utilisateur d’ajouter de la mémoire supplémentaire ? l’ordinateur sans outil spécial.
  • Page 346 Pas de touche (clavier) La distance entre les centres des touches de lettres d’un clavier. PCMCIA PCMCIA est une marque de commerce de la Personal Computer Memory Card International Association. La PCMCIA (association internationale des cartes de mémoire pour ordinateur personnel) est l’organisme qui définit les normes relatives aux cartes d’extension pour ordinateurs.
  • Page 347 POST (Power On Self Test) Auto-diagnostic (ou auto-test) de mise sous tension. Programme faisant partie du BIOS, qui vérifie la configuration et les conditions de fonctionnement de votre matériel chaque fois que votre portable est allumé. Des messages d’état et d’erreur peuvent être affichés avant que le système d’exploitation ne se charge.
  • Page 348 ROM (Read Only Memory) Mémoire en lecture seule, ou mémoire morte. Type de mémoire où les données sont stockées par transformation physique de la matière. Les données stockées de cette façon ne peuvent pas être modifiées par l’ordinateur et leur conservation n’exige pas de source de courant. SDRAM Mémoire vive dynamique synchrone.
  • Page 349 UL (Underwriters Laboratories) L’« Underwriters Laboratories » est un organisme indépendant qui effectue les tests de sécurité électrique des appareils et accorde les homologations correspondantes. Bus série universel. Norme permettant de connecter simultanément à un ordinateur jusqu’à 127 périphériques USB comme des manettes de jeu, des dispositifs de pointage, des imprimantes ou des claviers. Valeur par défaut Valeur préprogrammée à...
  • Page 350: Renseignements Sur La Réglementation

    Renseignements sur la réglementation Avis Les changements ou modifications qui ne sont pas expressément approuvés par Fujitsu pourraient interdire aux utilisateurs d’utiliser le matériel. AVIS DE LA FCC Avis aux utilisateurs de postes radio et de téléviseurs Cet appareil a été testé et jugé conforme aux limites établies pour le matériel numérique de classe B, selon la Partie 15 des règlements de la FCC.
  • Page 351 Avis aux utilisateurs du réseau téléphonique américain. Cette installation est conforme à la partie 68 de la réglementation de la FCC, ainsi qu’aux normes techniques relatives au raccordement des réseaux téléphoniques publiées par l’ACTA (Administrative Council for Terminal Attachments). Sous l’appareil se trouve une étiquette indiquant, entre autres, le numéro d’immatriculation FCC et le numéro d’équivalence sonnerie (NES) de cet appareil ou un identifiant du produit au format US:AAAEQ##TXXXX.
  • Page 352 Fujitsu America Incorporated. Si l’équipement brouille les communications du réseau téléphonique, l’entreprise de téléphone peut vous demander de débrancher l’installation jusqu’à...
  • Page 353 Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.
  • Page 354: Renseignements Sur La Réglementation De La Fcc

    Annexe A : Guide d’utilisation de la carte de réseau local sans fil Renseignements sur la réglementation de la FCC Veuillez prendre note des renseignements suivants sur la réglementation relative à la carte réseau sans fil en option. Remarques et déclarations réglementaires Santé...
  • Page 355 Renseignements sur la réglementation et avis de non-responsabilité Cette carte réseau sans fil doit être installée et utilisée conformément aux instructions de la documentation livrée avec le produit. Toute modification apportée sans l’approbation expresse du fabricant peut annuler le droit de l’utilisateur de s’en servir.
  • Page 356 ; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnement de l’appareil. Toute modification n’ayant pas été expressément approuvée par la société Fujitsu America Incorporated peut annuler le droit de l’utilisateur de se servir du matériel. Avis pour le Canada Le matériel destiné...
  • Page 357: Avant D'utiliser La Carte Réseau Sans Fil En Option

    Avant d’utiliser la carte réseau sans fil en option Ce guide explique comment installer et configurer correctement la carte réseau sans fil mini-PCI intégrée (disponible en option), ci-après désignée sous le nom de « carte réseau sans fil ». Avant d’utiliser la carte réseau sans fil, lisez attentivement le présent guide afin de bien comprendre son fonctionnement.
  • Page 358: Modes De Réseau Sans Fil Compatibles Avec Cette Carte

    Modes de réseau sans fil compatibles avec cette carte Mode Ad hoc Le mode Ad hoc désigne une topologie de réseau sans fil dans laquelle la connectivité entre les divers ordinateurs est établie sans périphérique central de réseau sans fil, ou point d’accès. La connectivité est établie uniquement à...
  • Page 359 Mode point d’accès (Infrastructure) Le mode Infrastructure désigne une topologie de réseau sans fil dans laquelle les appareils communiquent au sein d’un réseau sans fil ou câblé par l’intermédiaire d’un point d’accès. En mode Infrastructure, les appareils sans fil peuvent communiquer directement entre eux ou sur un réseau câblé. Les réseaux sans fil d’entreprise fonctionnent en mode Infrastructure car ils nécessitent une connexion au réseau local sans fil pour accéder aux ordinateurs, aux périphériques et aux services (par exemple, serveurs de fichier, imprimantes et bases de données)....
  • Page 360: Désactivation/Déconnexion De La Carte Réseau Sans Fil

    Manipulation de la carte réseau sans fil La carte réseau local sans fil est un dispositif en option qui peut être fourni avec votre ordinateur portable. Normalement, vous ne devriez pas avoir besoin de la retirer ou de la réinstaller. Le système d’exploitation de l’ordinateur est déjà...
  • Page 361: Désactivation Par L'icône Dans La Zone De Notification

    Désactivation avec le commutateur de la carte réseau sans fil La carte réseau sans fil peut être désactivée rapidement et efficacement en mettant le commutateur correspondant en position OFF (arrêt). Notez que ce Dispositif commutateur n’a aucun effet sur les sans fil modèles avec carte réseau Ethernet.
  • Page 362: Configuration De La Carte Réseau Sans Fil

    Configuration de la carte réseau sans fil La carte réseau sans fil en option peut être configurée pour établir la connectivité du réseau sans fil en utilisant le logiciel intégré dans Windows. Il prend également en charge la plupart des solutions de sécurité standard. Certains paramètres prédéfinis seront requis pour cette procédure.
  • Page 363: Dépannage De La Carte Réseau Sans Fil

    Dépannage de la carte réseau sans fil Dépannage Le tableau ci-dessous présente les causes possibles et les mesures correctives pour différents problèmes de réseau sans fil. Problème Cause possible Solution possible Connexion de Nom de réseau Connexion en mode Ad hoc : Assurez-vous que le SSID et la clé WEP réseau non (SSID) ou clé...
  • Page 364 Problème Cause possible Solution possible Connexion de L’ordinateur à Vérifiez si l’ordinateur est allumé. réseau non connecter est éteint disponible Interférences RF L’utilisation de canaux RF identiques ou se chevauchant peut nuire au (suite) provenant de points fonctionnement de la carte réseau sans fil. Changez le canal de votre d’accès ou d’autres point d’accès en tenant compte du canal du périphérique nuisible.
  • Page 365: Spécifications De La Carte Réseau Sans Fil

    Spécifications de la carte réseau sans fil Spécifications Élément Spécification Les cartes réseau sans fil Centrino Advanced-N 6200 (802.11agn 2x2) et Atheros Type de réseau XSPAN 801.11bgn respectent les normes EEE 802.11a, 802.11b/g et 802.11n sur les applications Wi-Fi*. Débit (Commutation automatique) débit maximum de 54 Mbit/s (IEEE 802.11n à...
  • Page 366 * « Type Wi-Fi » indique que le test d’interconnectivité de la Wi-Fi Alliance (organisation garantissant l’interconnectivité des réseaux sans fil) a réussi. ** La portée peut varier selon certains facteurs (par exemple, nombre de murs, réflectivité des matériaux ou interférences provenant d’autres sources de radiofréquences).
  • Page 367: Utilisation De Bluetooth

    Utilisation de Bluetooth Le module Bluetooth intégré est un composant offert en option pour les ordinateurs portables Fujitsu. Présentation de Bluetooth La technologie Bluetooth est conçue pour assurer la liaison sans fil à faible portée entre divers appareils mobiles, tels que téléphones, ordinateurs portables, imprimantes et caméras. La technologie Bluetooth permet d’établir des réseaux personnels (PAN) entre des appareils situés à...
  • Page 368 Les utilisateurs ne sont pas autorisés à modifier ce produit. Toute modification annule la garantie. Cet équipement ne peut être modifié, altéré ou changé en aucune façon sans l’autorisation écrite de Fujitsu. Toute modification non autorisée annulera les autorisations d’équipement de la FCC et d’Industrie Canada, de même que la garantie.
  • Page 369: Annexe B : Capteur D'empreintes Digitales

    Annexe B : Capteur d’empreintes digitales Présentation du capteur d’empreintes digitales optionnel Il est possible que votre ordinateur soit équipé d’un capteur d’empreintes digitales sous le pavé tactile Touchpad, entre les boutons gauche et droit. Ce capteur sert aussi de bouton de défilement. Grâce au capteur d’empreintes digitales, il n’est plus nécessaire de saisir votre nom d’utilisateur et votre mot de passe chaque fois que vous voulez :...
  • Page 370: Première Mise En Marche

    Le capteur d’empreintes digitales utilise le logiciel Softex OmniPass qui fournit des fonctions de gestion de mot de passe aux systèmes d’exploitation Microsoft Windows. OmniPass vous permet d’utiliser un « mot de passe principal » pour tous les écrans en ligne, toutes les applications Windows et d’autres applications demandant un mot de passe.
  • Page 371 Configuration de système nécessaire L’application OmniPass nécessite de l’espace sur votre disque dur ainsi qu’un système d’exploitation (SE) spécifique. Les exigences minimales sont les suivantes : • Système d’exploitation Windows XP Professionnel ou ultérieur • Au moins 35 Mo d’espace disque disponible Installation de l’application OmniPass Si l’application OmniPass est déjà...
  • Page 372 Vérification des informations concernant votre version d’OmniPass Après avoir installé OmniPass et redémarré votre système, vous pouvez décider de vérifier la version du logiciel. Pour vérifier votre version d’OmniPass : À partir du bureau Windows, double-cliquez sur l’icône en forme de clé OmniPass dans la barre des tâches (située habituellement dans le coin inférieur droit de l’écran),...
  • Page 373: Enregistrement Des Utilisateurs

    Enregistrement des utilisateurs Avant de pouvoir utiliser les fonctions d’OmniPass, vous devez d’abord enregistrer un utilisateur dans ce programme. Concept du mot de passe principal Les ressources d’un ordinateur sont souvent protégées par des mots de passe. Lorsque vous vous connectez à...
  • Page 374 ’ ’ ETTE PROCÉDURE D ENREGISTREMENT REPOSE SUR L HYPOTHÈSE QUE VOUS NE VOULEZ INTÉGRER ’ À ASS AUCUN PÉRIPHÉRIQUE D AUTHENTIFICATION OU AUTRE EMPLACEMENT DE STOCKAGE VOUS SOUHAITEZ DISPOSER DE CETTE FONCTIONNALITÉ CONSULTEZ LES SECTIONS CORRESPONDANTES DU PRÉSENT DOCUMENT Enregistrement de base L’Assistant d’enregistrement vous guidera à...
  • Page 375 Pendant la procédure d’enregistrement initial de l’utilisateur, vous serez invité à sélectionner le doigt qui sera enregistré. Les doigts déjà enregistrés seront marqués d’un crochet vert. Le doigt sélectionné pour l’enregistrement sera marqué d’une flèche rouge. OmniPass vous permet de réenregistrer un doigt. Si vous choisissez un doigt qui a déjà...
  • Page 376: Utilisation D'omnipass

    Utilisation d’OmniPass Vous pouvez maintenant commencer à utiliser OmniPass. Son utilisation régulière vous permettra de simplifier les procédures d’authentification. Indications des voyants du capteur d’empreintes digitales Une fois OmniPass installé, la couleur des voyants situés au-dessus et en dessous du capteur d’empreintes digitales vous informe sur l’état de ce dernier.
  • Page 377 La fenêtre Authentification de la connexion indique la fonction restreinte par OmniPass à laquelle vous tentez de vous connecter. Les icônes en bas à gauche (empreinte digitale et clé) indiquent les méthodes d’authentification disponibles. Les méthodes sélectionnées sont en surbrillance, contrairement aux méthodes non sélectionnées.
  • Page 378 Paramètres supplémentaires pour mémoriser un site Lorsque vous êtes invité à entrer un « nom convivial », vous pouvez définir la manière dont OmniPass vous authentifie sur ce site. Trois choix sont à votre disposition pour chaque site mémorisé par OmniPass. Le paramètre par défaut est Cliquer automatiquement sur le bouton «...
  • Page 379 Connexion à un site mémorisé Selon les informations contenues dans Paramètres pour ce site protégé par mot de passe, OmniPass vous invitera ou non à vous authentifier lorsque vous retournerez à un site mémorisé. Ces informations peuvent être modifiées dans Gestion du coffre-fort. Les cas suivants s’appliquent à...
  • Page 380 Si vous désirez afficher les informations d’identification sauvegardées pour un site Internet mémorisé, mettez en surbrillance la ressource souhaitée sous Boîte de dialogue ’Protection par mot de passe’ et cliquez sur Afficher les valeurs. En cas de réinitialisation d’un mot de passe ou d’expiration d’un compte, vous pouvez supprimer les informations d’identification sauvegardées dans OmniPass.
  • Page 381 ORSQUE VOUS SUPPRIMEZ UNE IDENTITÉ TOUS LES SITES MÉMORISÉS ET LES BOÎTES DE DIALOGUE « P » ’ ROTECTION PAR MOT DE PASSE ASSOCIÉS À L IDENTITÉ SONT PERDUS Pour définir l’identité par défaut, mettez en surbrillance l’identité souhaitée puis cliquez sur [Définir par défaut] et cliquez sur [Appliquer] pour vérifier que les paramètres sont bien enregistrés.
  • Page 382: Configuration D'omnipass

    Configuration d’OmniPass Cette section vous donne un aperçu de la fonction Exportation/Importation et du Centre de contrôle OmniPass. Exportation et importation d’utilisateurs OUS NE POUVEZ PAS IMPORTER UN UTILISATEUR DANS ASS SI UN UTILISATEUR PORTANT LE MÊME NOM Y EST DÉJÀ ENREGISTRÉ Vous pouvez importer et exporter des utilisateurs dans et hors d’OmniPass à...
  • Page 383 Cliquez sur Exporter un profil utilisateur OmniPass. OmniPass vous invitera à vous authentifier. Une fois l’authentification réussie, vous devez nommer le profil utilisateur OmniPass et décider où l’enregistrer. Un fichier .opi est généré et vous devez en sauvegarder une copie dans un endroit sûr. Ce fichier .opi contient toutes vos données d’utilisateur OmniPass.
  • Page 384: Centre De Contrôle Omnipass

    • Si vous exportez un utilisateur propre à OmniPass, vous pouvez importer cet utilisateur dans tout ordinateur exécutant OmniPass, à condition qu’un utilisateur portant le même nom n’y soit pas déjà enregistré. • Si vous tentez d’importer un profil utilisateur portant le même nom qu’un utilisateur déjà enregistré dans OmniPass, le processus d’importation échoue.
  • Page 385 ’ A SUPPRESSION D UN UTILISATEUR DÉTRUIT AUTOMATIQUEMENT TOUTES LES DONNÉES ASSOCIÉES À CET UTILISATEUR OUTES LES IDENTITÉS ET TOUTES LES INFORMATIONS ’ ’ IDENTIFICATION DE L UTILISATEUR SERONT PERDUES ’ I VOUS ÊTES CERTAIN DE DEVOIR SUPPRIMER L UTILISATEUR NOUS VOUS RECOMMANDONS ’...
  • Page 386 Paramètres utilisateur L’onglet « Paramètres utilisateur » comporte trois interfaces : Paramètres audio, Astuces de la barre de tâches et Enregistrement. Les paramètres utilisateur permettent aux utilisateurs de personnaliser OmniPass pour répondre à leurs préférences individuelles. Sous Paramètres utilisateur (Paramètres audio et Astuces de la barre de tâches), vous pouvez configurer la manière dont OmniPass informe l’utilisateur des événements d’OmniPass (par exemple, connexion réussie, accès refusé, etc.).
  • Page 387: Dépannage

    Dépannage Vous ne pouvez pas utiliser OmniPass pour créer des utilisateurs Windows. Vous devez d’abord créer l’utilisateur Windows, ce qui nécessite des droits d’administrateur. Une fois l’utilisateur Windows créé, vous pouvez l’ajouter dans OmniPass avec le même nom d’utilisateur et le même mot de passe. Impossible d’ajouter des utilisateurs Windows dans OmniPass Si vous rencontrez des difficultés pour ajouter un utilisateur Windows dans OmniPass, vous devrez peut-être modifier vos paramètres de sécurité...
  • Page 388 Cette boîte de dialogue apparaît si OmniPass n’a pas réussi à vous connecter à Windows à l’aide des informations d’identification fournies (nom d’utilisateur et mot de passe). Ceci peut arriver dans les circonstances suivantes : • Votre mot de passe Windows a changé. •...
  • Page 389: Annexe C : Utilisation De L'affichage Intel® Wireless Display

    Utilisation de la technologie Wireless Display La nouvelle technologie Intel® Wireless Display (WiDi) est offerte en option sur certains ordinateurs Fujitsu LIFEBOOK. Si votre système est doté de la technologie Intel WiDi, veuillez lire ces informations sur son utilisation. La technologie Intel WiDi vous permet d’afficher et de partager sur un téléviseur grand écran les images d’un ordinateur à...
  • Page 390: Démarrer L'application Widi

    • I VOUS AVEZ ACHETÉ UN SYSTÈME AVEC CARTE RÉSEAU LOCAL SANS FIL NTEL ET TECHNOLOGIE NTEL ’ EN OPTION IL POSSIBLE QUE L APPLICATION I SOIT PRÉ INSTALLÉE SELON LA CONFIGURATION DE VOTRE ). L SYSTÈME ES SYSTÈMES AYANT LA FONCTION NTEL I PRÉ...
  • Page 391: Index

    Index recharge remplacement À propos de ce guide remplacement hors tension Adaptateur auto/avion voyant de niveau Alimentation BIOS adaptateur auto/avion guide adaptateur secteur utilitaire de configuration gestion Bluetooth mise hors tension informations supplémentaires mise sous tension Bouton d’alimentation/veille/reprise panne problèmes sources Câble de sortie c.c.
  • Page 392 DVD multiformat modulaire Fente de dispositif antivol installation Fonction de veille prolongée périphériques activation/désactivation remplacement hors tension retrait Conventions utilisées dans ce guide Garantie Coordonnées pour contacter Fujitsu Gestion de l’alimentation Glisser Déballage Dépannage Haut-parleurs incorporés DIMM Haut-parleurs stéréo Disque dur problèmes voyant d’accès...
  • Page 393 Réseau local sans fil retrait avant d’utiliser la carte réseau sans fil Messages d’erreurs configuration Mode sommeil (veille) connexion au réseau Mode veille dépannage spécifications Restaurer vos logiciels pré-installés Ordinateur portable Fujitsu LIFEBOOK RJ-45 rangement voyager avec votre ordinateur Ouverture d’urgence du plateau...
  • Page 394 Utilitaire de mise à jour des  vidéo pilotes Fujitsu Driver Update Tableau de sécurité Verr défil Tableau de sécurité et d’applications LIFEBOOK Verr maj boutons Verr num configuration désinstallation lancement d’applications...

Table of Contents