HP Z600 - Workstation - 6 GB RAM Installation Manual
Pci express sound blaster x-fi titanium audio card installation
Hide thumbs
Also See for Z600 - Workstation - 6 GB RAM:
- User manual (72 pages) ,
- Installation manual (12 pages) ,
- Installation (2 pages)
Quick Links
See also:
Function Manual, Installation Manual
PCI Express Sound Blaster X-Fi Titanium
audio card installation
Introduction
This document describes the hardware and software installation of the PCI Express (PCIe) Sound
Blaster X-Fi Titanium audio card. For more information, refer to the Installation and Application CD.
Kit contents
●
PCIe Sound Blaster X-Fi Titanium audio card
●
PCIe Sound Blaster X-Fi Titanium audio card installation guide (this document)
●
Installation and Application CD
●
Regulatory compliance notices
●
Warranty information
System requirements
●
Microsoft®, Windows® XP Service Pack 2 or Windows Vista® Service Pack 1 or better or Windows
7®
●
Optical drive
●
Empty PCIe slot
To view QuickSpecs and determine the compatibility of this product with your HP computer, see
http://www.hp.com/go/productbulletin.
ENWW
© 2009, 2010 Hewlett-Packard Development Company, L.P. Microsoft,
Windows XP, and Windows Vista are U.S. registered trademarks of Microsoft
Corporation. Printed in the U.S.
Introduction
1
Related Manuals for HP Z600 - Workstation - 6 GB RAM
Summary of Contents for HP Z600 - Workstation - 6 GB RAM
-
Page 1: Kit Contents
To view QuickSpecs and determine the compatibility of this product with your HP computer, see http://www.hp.com/go/productbulletin. © 2009, 2010 Hewlett-Packard Development Company, L.P. Microsoft, Windows XP, and Windows Vista are U.S. registered trademarks of Microsoft Corporation. Printed in the U.S. -
Page 2: Warnings And Cautions
Warnings and cautions WARNING! Any surface or area of the equipment marked with this symbol indicates the presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce the risk of injury from a hot component, enable the surface to cool before touching. WARNING! Any surface or area of the equipment marked with this symbol indicates the presence of an electrical shock hazard. -
Page 3: Step 1-Preparing For Component Installation
Step 1—Preparing for component installation NOTE: Computer models vary. All illustrations are examples only. Accessing the internal components of the computer If you need help preparing the computer for this installation, consult the removal and replacement procedures in the service guide for your computer at http://www.hp.com/support/manuals. Power down the computer, and then disconnect the power cord. - Page 4 Step 2—Installing the Sound Blaster audio card Install the Sound Blaster audio card (1) in the selected PCIe expansion slot, and then secure the expansion slot retention clamp (2). Figure 2 Installing the audio card Disconnect the front audio cable from the front audio header on the system board. NOTE: To locate system board components, see the service label on the side access panel.
-
Page 5: Step 3-Reassembling The Computer
Step 3—Reassembling the computer Reinstall the card support, if applicable. Reinstall the side access panel. Reconnect power to the computer and all external devices. Restore power to the computer and all external devices. If theappears, select Cancel. Step 4—Installing the application software The PCIe Sound Blaster X-Fi Titanium audio card supports application software running under Microsoft®... - Page 6 PCI Express Sound Blaster X-Fi Titanium audio card installation ENWW...