HP 5600 - Compaq TFT RKM User Manual

HP 5600 - Compaq TFT RKM User Manual

Tft5600 rackmount keyboard and monitor (rkm) user guide
HP TFT5600 Rackmount Keyboard
and Monitor (RKM)

User Guide

January 2004 (Fourth Edition)
Part Number 229719-004
Table of Contents
loading

Summary of Contents for HP 5600 - Compaq TFT RKM

  • Page 1: User Guide

    HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide January 2004 (Fourth Edition) Part Number 229719-004...
  • Page 2 © 2001 Hewlett-Packard Company Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products.
  • Page 3: Table Of Contents

    Contents About This Guide Important Safety Information ................... vii Symbols on Equipment..................... vii Rack Stability........................ix Symbols in Text......................... ix Getting Help........................x Technical Support ......................x HP Website........................x Authorized Reseller..................... xi Chapter 1 Introduction TFT5600 RKM Features....................1-2 Components ........................1-4 Chapter 2 Installation Installing the TFT5600 RKM ..................2-1...
  • Page 4 Contents OSD Main Menu ......................3-3 OSD Default Menu ......................3-4 Auto Setup ........................ 3-4 Brightness ......................... 3-5 Contrast........................3-5 Image Adjust......................3-6 Languages....................... 3-13 OSD Settings ......................3-13 Information ......................3-16 Status Bar ........................3-16 Using the Keyboard....................... 3-17 Keyboard Programming..................
  • Page 5 Contents Appendix B Electrostatic Discharge Precautions........................B-1 Grounding Methods ......................B-2 Appendix C Power Cord Set Requirements General Requirements..................... C-1 Country-Specific Requirements..................C-2 Appendix D Specifications Index HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide...
  • Page 6: About This Guide

    About This Guide This guide is designed to be used as step-by-step instructions for installation and as a reference for operation, troubleshooting, and future upgrades. Important Safety Information Before installing this product, read the Important Safety Information document included with the server. Symbols on Equipment The following symbols may be placed on equipment to indicate the presence of potentially hazardous conditions:...
  • Page 7 About This Guide This symbol indicates the presence of electric shock hazards. The area contains no user or field serviceable parts. Do not open for any reason. WARNING: To reduce the risk of injury from electric shock hazards, do not open this enclosure.
  • Page 8: Rack Stability

    About This Guide Rack Stability WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that: • The leveling jacks are extended to the floor. • The full weight of the rack rests on the leveling jacks. •...
  • Page 9: Getting Help

    About This Guide Getting Help If you have a problem and have exhausted the information in this guide, you can get further information and other help in the following locations. Technical Support In North America, call the HP Technical Support Phone Center at 1-800-652-6672. This service is available 24 hours a day, 7 days a week.
  • Page 10: Authorized Reseller

    About This Guide Authorized Reseller For the name of your nearest authorized reseller: • In the United States, call 1-800-345-1518. • In Canada, call 1-800-263-5868. • Elsewhere, see the HP website for locations and telephone numbers. HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide...
  • Page 11: Introduction

    Introduction The HP TFT5600 Rackmount Keyboard and Monitor (RKM) is a rack-mountable 1U integrated flat panel monitor and keyboard with hot keys and track ball. NOTE: 1U= 1.75 inches or 4.445 cm Figure 1-1: TFT5600 RKM HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide...
  • Page 12: Tft5600 Rkm Features

    Introduction The TFT5600 RKM is mounted on rails with space available to add a 1U switch box behind the unit. The TFT5600 RKM can be used with all Compaq 9000 Series racks and HP 10000 Series racks.. The TFT5600 RKM uses a 15-inch (38.1-cm) color active matrix Thin Film Transistor (TFT) Liquid Crystal Display (LCD).
  • Page 13 Introduction Table 1-1: TFT5600 RKM Features continued Feature Description VGA connector Plugs into a standard VGA connector; does not require a special graphics adapter card Plug and play Plug and Play capability if supported by your system On-screen display (OSD) Available in ten languages: •...
  • Page 14: Components

    Introduction Components 10 11 PROGRAM Figure 1-2: TFT5600 RKM Components Reference Component Function Number Display release latch Pivots up, used to unlatch the display assembly Display switch Powers off the panel when the display is closed while the computer is still on On-screen display Used to scroll up in the OSD menu (OSD) scroll up button...
  • Page 15 Introduction Table 1-1: TFT5600 RKM Features continued Reference Component Function Number Programmable wizard Initiates the programming operations mode, allows programming of nine hot keys, and returns the hot keys to defaults Nine hot keys Allows quick access to the nine most often used devices Keyboard hot key label Allows user to record programmed...
  • Page 16: Installation

    Installation Installing the TFT5600 RKM This chapter discusses the installation and setup procedures for installing the TFT5600 RKM. Kit Contents Below are the items and quantities required for assembly: • M-6 cage nuts (2) • M-6 screws (8) • 6-32 screws (12) •...
  • Page 17: Installation Instructions

    Installation Installation Instructions 1. Determine the appropriate rack position for the TFT5600 RKM, generally 20U or user preference. Measuring from the top of the component, use the template on the front and rear of the rack frame to mark the attachment points for the mounting brackets and rear cage nuts.
  • Page 18 Installation 2. Install the mounting rails with slides. a. Insert one cage nut (1) into the hole marked with the rack template on the rear of the rack. b. Hook the tabs on the mounting rail into the appropriate holes on the rear of the rack, and insert one screw (2).
  • Page 19 Installation 3. Attach the brace assembly to each mounting rail with the cable access hole facing the right side of the rack. a. Flex the rail out slightly to allow the brace to be inserted. Align the screw holes on the brace with the screw holes on the rails (1). b.
  • Page 20 Installation 4. Install the tray assembly. a. Fully extend the sliding rails until locked (1). b. Place the tray assembly on the rails, aligning the screw holes on the tray with the tabs on the rails (2). c. Secure with two 6-32 screws on each side (3). Figure 2-4: Installing the tray assembly HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide...
  • Page 21 Installation 5. Attach the cable management arm to the rear of the tray with two 6-32 screws. Figure 2-5: Attaching the cable management arm 6. Carefully route the keyboard power and video cables into the cable management arm. Then route the cables through the mounting rail opening. Figure 2-6: Routing the cables HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide...
  • Page 22 Installation 7. Place the tray back into the rack. a. Slide the locking bar (1) to unlock. IMPORTANT: If the TFT5600 RKM is not properly aligned with other rack-mounted devices when installed, cosmetic damage to the top of the unit can occur due to interference.
  • Page 23: Accessing The Tft5600 Rkm Tray

    Installation Accessing the TFT5600 RKM Tray 1. Gently push in on the tray (1) to release lock, and then fully extend the unit until the slides lock. 2. Lift up the display release latch (2) then rotate the display (3). Figure 2-8: Accessing the TFT5600 RKM Removing the TFT5600 RKM To remove the TFT5600 RKM, reverse the order of the steps listed in the...
  • Page 24: Cable-Locking Mechanism

    Installation Cable-Locking Mechanism Cables on the TFT5600 RKM have a locking mechanism to provide a secure cable connection. You must use proper procedures when disconnecting these cables. CAUTION: Failure to follow proper disconnect procedures could result in damage to the cable or your unit. To properly disconnect the keyboard cable: 1.
  • Page 25 Installation If you are connecting the keyboard to a switchbox, connect the cables to the switch in this order: 1. Mouse 2. Video 3. Keyboard IMPORTANT: This cable connection sequence is particularly important later when you install new devices to your system. You can connect a mouse and/or keyboard to the switch when the system is running.
  • Page 26: Operating The Tft5600 Rkm

    Operating the TFT5600 RKM On-Screen Display The On-Screen Display (OSD) buttons are used to operate the TFT5600 RKM OSD menus. HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide...
  • Page 27 Operating the TFT5600 RKM Figure 3-1: OSD Buttons Reference Component Function Number OSD scroll up Used to scroll up in the OSD button menu and adjust the function OSD scroll Used to scroll down in the down button OSD menu and adjust the function •...
  • Page 28: Osd Main Menu

    Operating the TFT5600 RKM OSD Main Menu To launch the OSD main menu: 1. Press the OSD activation button (3) on the front panel. The main menu displays on the screen 2. To select a menu item, scroll down by pressing the Down (-) button (2), or scroll up by pressing the Up (+) button (1).
  • Page 29: Osd Default Menu

    Operating the TFT5600 RKM OSD Default Menu The OSD default menu provides access to the following functions: • Auto Setup • Brightness • Contrast • Image Adjust • Languages • OSD Settings • Settings Restored on a Global Basis • Settings Restores on a Mode Basis •...
  • Page 30: Brightness

    Operating the TFT5600 RKM Auto Clock Automatically adjusts the output clock per line to match input. Auto Clock is a Global Setting. Brightness This option displays a slider bar within the Status Bar to allow the adjustment of the back light brightness. •...
  • Page 31: Image Adjust

    Operating the TFT5600 RKM Image Adjust This option contains a sub-menu: • Horizontal Position • Vertical Position • Image Enhancement • Color • Exit — Up (+) moves up a selection in the Image Adjust menu list. — Down (-) moves down a selection in the Image Adjust menu list. —...
  • Page 32 Operating the TFT5600 RKM Vertical Position This option displays a slider bar within the Status Bar to allow the adjustment of the screen’s vertical position. The Center of the bar is obtained from the factory-preset value for Vertical Position. • Up (+) increases the current value.
  • Page 33 Operating the TFT5600 RKM Text When selected, the IQ Scaling Engine will be set to use a high sharpening filter to allow for sharper text. Video When selected, the IQ Scaling Engine will be set to use a low sharpening filter to allow sharper graphics.
  • Page 34 Operating the TFT5600 RKM Color Temp This option contains a sub-menu: NOTE: Color Temp-Cool, -Neutral, and -Warm are Mode Settings. • Cool When selected, a Gamma table for Cool temperatures will be loaded for all three- color channels. • Neutral When selected, a Gamma table for Neutral temperatures will be loaded for all three-color channels.
  • Page 35 Operating the TFT5600 RKM RGB Adjust This option contains a sub-menu: NOTE: RGB Adjust-Red, -Green, and -Blue are Mode Settings • This option displays a slider bar within the Status Bar to allow the adjustment of the screen’s Red color. —...
  • Page 36 Operating the TFT5600 RKM Black Level Adjust This option contains a sub-menu: NOTE: Black Level Adjust-Red, -Green, and -Blue are Mode Settings. • This option displays a slider bar within the Status Bar to allow the adjustment of the screen’s Black level for Red. —...
  • Page 37 Operating the TFT5600 RKM Advanced This option contains a sub-menu: • Phase Adjust This option displays a slider bar within the Status Bar to allow the adjustment of the analog signals phase. — Up (+) increases the current value. — Down (-) decreases the current value. —...
  • Page 38: Languages

    Operating the TFT5600 RKM Languages This option contains a sub-menu: • English • Dutch • French • German • Italian • Japanese • Portuguese • Simple Chinese • Spanish • Swedish — Up (+) moves up a selection in the Language menu list. —...
  • Page 39 Operating the TFT5600 RKM OSD Position This option contains a sub-menu: • Horizontal Position • Vertical Position • Exit — Up (+) moves up a selection in the OSD Position menu list. — Down (-) moves down a selection in the OSD Position menu list. —...
  • Page 40 Operating the TFT5600 RKM OSD Size This option contains a sub-menu: • Normal • Double — Up (+) moves up a selection in the OSD Size menu list and activates that choice. — Down (-) moves down a selection in the OSD Size menu list and activates that choice.
  • Page 41: Information

    Operating the TFT5600 RKM Information The OSD displays the following unit information: • Model Number • Micro Code Version • EXIT Status Bar The Status Bar displays rate, for example: 1024x768 60 Hz 3-16 HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide...
  • Page 42: Using The Keyboard

    Operating the TFT5600 RKM Using the Keyboard The TFT5600 RKM features nine hot keys with one programmable key available for quick access to the nine most often used rack-mounted devices. PROGRAM Figure 3-2: Keyboard hot keys Item Description Programmable Wizard key Nine hot keys Keyboard hot key label The programmable wizard key (1) allows programming of the other nine hot...
  • Page 43: Keyboard Programming

    Operating the TFT5600 RKM Keyboard Programming The TFT5600 RKM supports up to seven keystrokes for assigning up to nine devices to hot keys. To program a hot key: 1. Press the Programming Wizard Key. 2. Press the Prnt Scrn key. 3.
  • Page 44: Keyboard Hot Key Label

    Operating the TFT5600 RKM Keyboard Hot Key Label The TFT5600 RKM features an overlay above the nine hot keys to allow the user to install a pencil re-writable label. To install the keyboard hot key label: 1. Remove the release liner on the label. 2.
  • Page 45: Care And Maintenance

    Care and Maintenance Maintenance and Shipping Guidelines This section discusses maintenance and shipping guidelines for your TFT5600 RKM. To protect your unit from overheating and other types of damage: • Use only a power source and connection appropriate for this unit, as indicated on the marking label and back plate.
  • Page 46: Cleaning The Display

    Care and Maintenance • Do not drop the unit or place it on an unstable surface. • Do not allow anything to rest on the power cord. Do not walk on the cord. • Keep the unit in a well-ventilated area, away from excessive light, heat, and moisture.
  • Page 47: Moving The Tft5600 Rkm Installed In A Rack

    Care and Maintenance Moving the TFT5600 RKM Installed in a Rack When moving the TFT5600 RKM installed in a rack, it is recommended to install the lock plates, included in your kit, on each side of the unit and rack. To install the lock plates: 1.
  • Page 48: Regulatory Compliance Notices

    Regulatory Compliance Notices Regulatory Compliance Identification Numbers For the purpose of regulatory compliance certifications and identification, your TFT5600 RKM is assigned an HP Series Number. The HP Series Number for this product is E01007. The TFT5600 RKM Series Number can be found on the product label, along with the required approval markings and information.
  • Page 49: Class A Equipment

    Regulatory Compliance Notices The rating label on the device shows which class (A or B) the equipment falls into. Class B devices have an FCC logo or FCC ID on the label. Class A devices do not have an FCC ID on the label. Once the class of the device is determined, refer to the following corresponding statement.
  • Page 50: Modifications

    Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the Hewlett-Packard Company may void the user’s authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations.
  • Page 51: Canadian Notice (Avis Canadien

    Regulatory Compliance Notices Canadian Notice (Avis Canadien) Class A Equipment This Class A digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Class B Equipment This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations.
  • Page 52: Japanese Notice

    ZH 1/618 (German Safety Regulations for Display Work Places in the Office Sector) in the Text Mode (720 x 400) using MS- DOS version 3.31 (or higher) and BASICA as published by the Hewlett-Packard Company.
  • Page 53: Appendix B Electrostatic Discharge

    Electrostatic Discharge Precautions To prevent damage to the system, be aware of the precautions you need to follow when setting up the unit or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices.
  • Page 54: Grounding Methods

    Electrostatic Discharge Grounding Methods There are several methods for grounding. Use one or more of the following methods when handling or installing electrostatic-sensitive parts: • Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm ±...
  • Page 55: Power Cord Set Requirements

    Power Cord Set Requirements The power cord set meets the requirements for use in the country where you purchased your equipment. The voltage selection switch allows you to select the appropriate line voltage for your server. Power cord sets for use in other countries must meet the requirements of the country where you use the server.
  • Page 56: Country-Specific Requirements

    Power Cord Set Requirements Country-Specific Requirements Use the following table to identify the appropriate accredited agency in your country. Table C-1: Power Cord Set Requirements - By Country Country Accredited Agency Applicable Note Numbers Australia EANSW Austria Belgium CEBC Canada Denmark DEMKO Finland...
  • Page 57 Power Cord Set Requirements Table C-1: Power Cord Set Requirements - By Country continued Country Accredited Agency Applicable Note Numbers United Kingdom United States Notes: Flexible cord must be Type HO5VV-F, 3-conductor, 0.75 mm conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country where it will be used.
  • Page 58: Appendix D Specifications

    Specifications Table D-1: HP TFT5600 RKM Display 15 in 38.1 cm Flat panel, Active Type matrix-TFT LCD 15-in diagonal 38.1-cm Viewable Image Size Transparent protector Face Treatment with antiglare coating Maximum Weight 13.75 lb 6.25 kg (Unpacked) Maximum Dimensions Height 1.7 in 4.32 cm Depth...
  • Page 59 Specifications Table D-1: HP TFT5600 RKM continued .29 mm Dot Pitch 48.2 kHz Horizontal Frequency Vertical Frequency 60 Hz Environmental Temperature Requirements (Independent of Altitude) 10 to 50°C Operating 0 to 60°C Storage Temperature Humidity (Non-Condensing) 20 to 90% Operating 0 to 90% Non-Operating 90 to 264 VAC, 47 to...
  • Page 60: Index

    Index Canadian Notice (Avis Canadien) A-4 care and maintenance 4-1 CE Marking A-4 advanced color, vertical, position 3-8 color level 3-12 color-temp, vertical, position 3-9 phase adjust 3-12 components authorized reseller xi cap lock LED 1-5 auto clock 3-5 display activation button 1-4 auto level 3-4 display release latch 1-4 auto phase 3-4...
  • Page 61 Index Declaration of Conformity A-3 illustrations default menu, on-screen display (OSD) 3-4 aligning rail and inserting screws 2-3 display measuring the 1U template 2-2 activation button 1-4 placing rail covers 2-7 cleaning 4-2 placing tray back into rack 2-7 release latch 1-4 image adjust 3-6 scroll down button 1-4 image enhancement 3-7...
  • Page 62 Index launching 3-3 main menu 3-3 main menu, on-screen display (OSD) 3-3 mode setting 3-3 maintenance operating 3-1 cleaning the display 4-2 position 3-14 shipping guidelines 4-1 scroll down button 3-2 menu item, selecting 3-3 scroll up button 3-2 mode setting settings 3-13 auto phase 3-4 size 3-15...
  • Page 63 Index text 3-8 storage D-2 TFT5600 RKM vertical frequency D-2 accessing the tray 2-8 weight D-1 care and maintenance 4-1 Thin Film Transistor (TFT) Liquid Crystal components 1-4 Display (LCD) dimensions D-1 product description 1-2 dot pitch D-2 track ball 1-5 horizontal frequency D-2 humidity D-2 image size D-1...

This manual is also suitable for:

Tft5600

Table of Contents