Fujitsu FPCM23451 User Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. FPCM23451
  6. User manual

Fujitsu FPCM23451 User Manual

User guide
Hide thumbs
Table of Contents

Quick Links

User's Guide
Learn how to use your
Fujitsu LifeBook
PH520 notebook
®
Table of Contents
loading

Related Manuals for Fujitsu FPCM23451

Summary of Contents for Fujitsu FPCM23451

  • Page 1  User’s Guide Learn how to use your ® Fujitsu LifeBook PH520 notebook...
  • Page 2 All other trademarks mentioned herein are the property of their respective owners. © Copyright 2010 Fujitsu America, Inc. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu. No part of this publication may ...
  • Page 3 TATE OF ALIFORNIA TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM ASH HANDS AFTER HANDLING DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Fujitsu America, Inc. Address: 1250 E. Arques Avenue Sunnyvale, CA 94085 Telephone: (408) 746-6000...

  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Class II Adapters with an output rating of 19 VDC, with a  minimum current of 3.16 A (60 W). AC adapter output polarity: When using your notebook equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: •...
  • Page 5 * To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site at www.shopfujitsu.com in the US or www.fujitsu.ca/products/notebooks in Canada. ** RBRC is an independent third party to which Fujitsu provides funding for battery recycling; RBRC is in no way affiliated with Fujitsu.

  • Page 6: Table Of Contents

    Fujitsu Contact Information ........12...
  • Page 7 Fujitsu Driver Update Utility ........44...
  • Page 8 Chapter 3 User-Installable Features Lithium ion Battery..........50 Recharging the Batteries.
  • Page 9 Chapter 5 Care and Maintenance Caring for your PH520 LifeBook ....... . 87 Cleaning your notebook .
  • Page 10 Glossary/Regulatory Glossary ........... . . 101 Regulatory Information .

  • Page 11: Preface

    Preface About This Guide The PH520 LifeBook from Fujitsu is a small yet powerful computer, perfect for networking. It is powered by an AMD Athlon™ II Neo processor and integrated graphics. The notebook has a built-in 11.6” wide HD color display with LED backlight.

  • Page 12: Fujitsu Contact Information

    LEASE READ ALL WARNING INFORMATION CAREFULLY Fujitsu Contact Information Service and Support You can contact Fujitsu Service and Support in the following ways: • Toll free: 1-800-8Fujitsu (1-800-838-5487) • Website: http://www.computers.us.fujitsu.com/support Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution: •...
  • Page 13 OU MUST HAVE AN ACTIVE INTERNET CONNECTION TO USE THE ONLINE LINKS Limited Warranty Your PH520 notebook is backed by a Fujitsu International Limited Warranty. Check the service kit that came with your notebook for the Limited Warranty period and terms and conditions. 13 - About This Guide...

  • Page 14: Getting To Know Your Notebook

    Getting to Know Your Notebook Overview This section describes the components of your Fujitsu PH520 LifeBook notebook. We strongly recommend that you read it before using your notebook – even if you are already familiar with notebook computers. Figure 1. Fujitsu PH520 LifeBook...

  • Page 15: Locating The Controls And Connectors

    Locating the Controls and Connectors Connectors and peripheral interfaces on the PH520 notebook allow you to connect a variety of devices. Specific locations are illustrated in Figures 2 through 5. The table below provides a short description of each icon on the PH520 notebook. Each of the icons is either molded into or printed on the notebook chassis.
  • Page 16 Connection Notebook Purpose Icon Security lock slot The security slot allows you to secure the notebook using compatible locking devices. Suspend/ Resume The Suspend/Resume button allows you to suspend notebook activity button without powering off, resume your notebook from suspend mode, and power on the system when it has been shut down from Windows.
  • Page 17 Built-in Microphone 1.3 Megapixel Web Camera Display Panel Power/Suspend/ Resume Button Status Indicator Panel Touchpad Pointing Device Keyboard Figure 2. PH520 LifeBook with display open 17 - Locating the Controls and Connectors...

  • Page 18: Front And Display Components

    Front and Display Components The following is a brief description of your notebook’s front and display features. Web Camera The 1.3 megapixel web camera allows you to take pictures of yourself to send over the internet. For information on using the camera, see the documentation associated with the ArcSoft WebCam Companion application.

  • Page 19: Left-Side Panel Components

    External Video Port HDMI Port USB 2.0 Port DC Power Jack Air Vents Figure 3. PH520 Lifebook left-side panel Left-Side Panel Components The following is a brief description of your notebook’s left-side components. External Video Port The external video port allows you to connect an external monitor or LCD projector. See “External Video Port”...
  • Page 20 Air Vents The air vents allow proper air circulation to ensure that the system does not overheat O PROTECT YOUR NOTEBOOK FROM DAMAGE AND TO OPTIMIZE SYSTEM PERFORMANCE BE SURE TO KEEP ALL AIR VENTS UNOBSTRUCTED CLEAN AND CLEAR OF DEBRIS HIS MAY REQUIRE PERIODIC CLEANING DEPENDING UPON THE ENVIRONMENT IN WHICH THE SYSTEM IS USED...

  • Page 21: Right-Side Panel Components

    Secure Digital/ Headphone Jack USB 2.0 Ports LAN (RJ-45) Jack Memory Stick Card Slot Wireless LAN/ Microphone Jack Anti-Theft Lock Slot Bluetooth Switch Figure 4. PH520 LifeBook right-side panel Right-Side Panel Components The following is a brief description of your notebook’s right-side components. Secure Digital/Memory Stick Card Slot The Secure Digital/Memory Stick (SD/MS) card slot allows you to insert a flash memory card for data storage.
  • Page 22 LAN (RJ-45) Port The internal LAN (RJ-45) port is used for an internal 10/100 Base-Tx Ethernet. See “Internal LAN (RJ- 45) jack” on page 60. Anti-theft Lock Slot The anti-theft lock slot allows you to attach a optional physical lock-down device. Microphone Jack The microphone jack allows you to connect an external mono microphone.

  • Page 23: Bottom Components

    Battery Latches Lithium ion Battery Memory Upgrade Compartment Air Vents (various locations) Stereo Speaker Stereo Speaker Figure 5. PH520 LifeBook bottom panel Bottom Components The following is a brief description of your notebook’s bottom panel components. Battery Latches The battery latches are used to secure the Lithium ion battery in the battery bay. 23 - Locating the Controls and Connectors...
  • Page 24 Lithium ion Battery Bay The battery compartment contains the Lithium ion battery. The battery should be removed when the computer is stored over a long period of time or for swapping a discharged battery with a charged Lithium ion battery. See “Lithium ion Battery” on page 50. Air Vents The air vents allow air to circulate through the system to cool down the components.

  • Page 25: Status Indicator Panel

    Battery Charge/ CapsLock DC In Hard Power NumLock Drive Indicator Access Figure 6. Status Indicator Panel Status Indicator Panel The status indicators display symbols that correspond to specific components of your notebook. (Figure 6) The symbols show how each of those components is operating. The status indicators are located on the left front edge of the notebook.

  • Page 26: Power Indicator

    Power Indicator The LED near the Power indicator symbol shows whether your system is operational. When it is solid blue, it means that there is power to your computer and that it is ready for use. Battery Charge/DC-In Indicator Depending upon whether you have an AC adapter connected or not, the battery indicator will appear in a variety of colors and states.

  • Page 27: Hard Drive Access Indicator

    ATTERIES SUBJECTED TO SHOCKS VIBRATION OR EXTREME TEMPERATURES CAN BE PERMANENTLY DAMAGED Hard Drive Access Indicator The Hard Drive Access indicator lights blue when your internal hard drive is being accessed. CapsLock Indicator The CapsLock indicator shows that your keyboard is set to type in all capital letters. NumLk Indicator The NumLk indicator shows that the integral keyboard is set in ten-key numeric keypad mode.

  • Page 28: Display Panel

    Figure 2. Opening the Display Panel Display Panel Your Fujitsu notebook contains a display panel that is backlit for easier viewing in bright environments. Opening the Display Panel While holding the base of the unit, lift the display backwards, being careful not to touch the screen with your fingers, until it is at a comfortable viewing angle.
  • Page 29 OTE THAT WHEN YOU CHANGE THE DISPLAY SETTINGS THE CHANGES WILL BE RETAINED AFTER SLEEP AND RESTART Using the Keyboard to Adjust Brightness Use the following key combinations to adjust the screen brightness: • [Fn+F6]: Pressing repeatedly will lower the brightness of your display. •...

  • Page 30: Keyboard

    Keyboard Function Keys Numeric Keypad Application Key Cursor Keys (surrounded by heavy line) Fn Key Start Key Figure 3. Keyboard Using the Keyboard Your PH520 notebook has an integral 82-key keyboard. The keys perform all the standard functions of a 101-key keyboard, including the Windows keys and other special function keys.
  • Page 31 • Cursor keys: Your keyboard contains four arrow keys for moving the cursor or insertion point to the right, left, up, or down within windows, applications and documents. • Function keys: The keys labeled [F1] through [F11/F12], are used to produce special actions that vary depending on what program is running.
  • Page 32 Function Keys Your notebook has 11 function keys, F1 through F11/F12. The functions assigned to these keys differ for each application. • [Fn+F3]: Pressing [F3] while holding [Fn] will toggle the Audio Mute on and off. • [Fn +F4]: Pressing [F4] while holding [Fn] allows you to toggle the mouse on and off. •...

  • Page 33: Touchpad Pointing Device

    Figure 4. Touchpad pointing device The Touchpad pointing device comes built into your Fujitsu notebook. It is used to control the movement of the pointer to select items on your display panel. The Touchpad is composed of a cursor control, a left button and a right button.

  • Page 34: Clicking

    N EXTERNAL MOUSE CAN BE CONNECTED TO THE PORTS ON YOUR NOTEBOOK AND USED SIMULTANEOUSLY WITH THE OUCHPAD OWEVER IF YOU BOOT THE SYSTEM WITH AN EXTERNAL MOUSE CONNECTED THE OUCHPAD WILL BE DISABLED OR ENABLED DEPENDING ON THE BIOS .

  • Page 35: Double-Clicking

    Double-Clicking Double-clicking means pushing and releasing the left button twice in rapid succession. This procedure does not function with the right button. To double-click, move the cursor to the item you wish to select, press the left button twice, and immediately release it. You can also perform the double-click operation by tapping lightly on the Touchpad twice.

  • Page 36: Dragging

    Dragging Dragging means pressing and holding the left button, while moving the cursor. To drag, move the cursor to the item you wish to move. Press and hold the left button while moving the item to its new location and then release it.

  • Page 37: Volume Control

    Volume Control Your Fujitsu notebook has multiple volume controls which interact with each other. NY SOFTWARE THAT CONTAINS AUDIO FILES WILL ALSO CONTAIN A VOLUME CONTROL OF ITS OWN YOU INSTALL AN EXTERNAL AUDIO DEVICE THAT HAS AN INDEPENDENT VOLUME CONTROL...

  • Page 38: Getting Started With Your Notebook

    Chapter 2 Getting Started with Your Notebook DC Power Jack AC Adapter AC Cable Figure 10. Connecting the AC Adapter...

  • Page 39: Power Sources

    Power Sources Your Fujitsu notebook has three possible power sources: a primary Lithium ion battery, an AC adapter or an optional Auto/Airline adapter. Connecting the Power Adapters The AC adapter or optional Auto/Airline adapter provides power for operating your notebook and charging the batteries.

  • Page 40: Starting Your Ph520 Lifebook

    Starting Your PH520 LifeBook Power On Power/Suspend/Resume Button The Power/Suspend/Resume button is used to turn on your notebook from its off state. Once you have connected your AC adapter or charged the internal Lithium ion battery, you can power on your notebook. HEN YOU TURN ON YOUR NOTEBOOK BE SURE YOU HAVE A POWER SOURCE HIS MEANS THAT AT LEAST ONE BATTERY IS INSTALLED AND CHARGED...

  • Page 41: Boot Sequence

    This information is in the BIOS program. Each time you power up or restart your notebook, it goes through a boot sequence which displays a Fujitsu logo until your operating system is found. During booting, your notebook is performing a standard boot sequence including a Power On Self Test (POST).

  • Page 42: Booting The System

    When you turn on your notebook for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin.

  • Page 43: Starting Windows The First Time

    Starting Windows the First Time Registering with Microsoft In order to ensure that you receive the most benefits from the Windows operating system, it should be registered the first time you use it. After you receive the Windows Welcome screen, you will be prompted to enter registration information in the following order.

  • Page 44: Installing Clickme

    Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can automatically or manually go to the Fujitsu site to check for new updates for your system. For more information about the FDU utility, refer to “Automatically Downloading Driver Updates” on page 86.

  • Page 45: Power Management

    Power Management Your notebook has many options and features for conserving battery power. Some of these features are automatic and need no user intervention. However, others depend on the parameters you set to best suit your operating conditions, such as those for the display brightness. Internal power management for your notebook may be controlled from settings made in your operating system, pre-bundled power management application, or from settings made in BIOS setup utility.
  • Page 46 Your notebook can be put in Standby mode by: • Pressing the Power/Suspend/Resume button when your system is turned on. • Selecting Standby from the Turn off computer menu. • Timing out from lack of activity. • Allowing the battery to reach the Dead Battery Warning condition. Your notebook’s system memory typically stores the file on which you are working, open application information, and any other data required to support operations in progress.

  • Page 47: Hibernation (Save-To-Disk) Feature

    Hibernation (Save-to-Disk) Feature The Hibernation feature saves the contents of your notebook’s system memory to the hard drive as a part of the Suspend/Resume mode. You can enable or disable this feature. ■ F YOUR NOTEBOOK IS ACTIVELY ACCESSING INFORMATION WHEN YOU ENTER TANDBY OR IBERNATION MODE CHANGES TO OPEN FILES ARE NOT LOST...

  • Page 48: Restarting The System

    Restarting the System If your system is on and you need to restart it, be sure that you use the following procedure. Click the [Start] button, and then click the little arrow to the right of the [Shut down] button. Click on Restart.
  • Page 49 To determine the current ENERGY STAR compliance status of your system, please visit the ENERGY STAR website at www.energystar.gov. To read about how Fujitsu is supporting Sustainable Management along with several other environmental activities, visit the Fujitsu Corporate Citizenship page at: http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php...

  • Page 50: User-Installable Features

    Chapter 3 User-Installable Features Lithium ion Battery Your notebook has a Lithium ion battery that provides power for operating your notebook when no external power source is available. The battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemicals or other hazards.

  • Page 51: Recharging The Batteries

    • CTUAL BATTERY LIFE WILL VARY BASED ON SCREEN BRIGHTNESS APPLICATIONS FEATURES POWER MANAGEMENT SETTINGS BATTERY CONDITION AND OTHER CUSTOMER PREFERENCES PTICAL DRIVE OR HARD DRIVE USAGE MAY ALSO HAVE A SIGNIFICANT IMPACT ON BATTERY LIFE HE BATTERY CHARGING CAPACITY IS REDUCED AS THE BATTERY AGES F YOUR BATTERY IS RUNNING LOW QUICKLY YOU SHOULD REPLACE IT WITH A NEW ONE...

  • Page 52: Replacing The Battery

    SING HEAVY CURRENT DEVICES OR FREQUENT EXTERNAL OPTICAL DRIVE ACCESSES MAY PREVENT CHARGING COMPLETELY Low Battery State When the battery is running low, the Battery Level indicator will blink orange. If you do not respond to the low battery alarm, the batteries will continue to discharge until they are too low to operate. Your notebook will then go into Standby mode to try and protect your data for as long as possible.
  • Page 53 Cold-swapping Batteries Have a charged battery ready to install. Shut down your system and disconnect the AC adapter. Turn the system upside down on a secure surface. Press the battery release latches towards the sides of the system. Slide the battery out of the compartment. Slide the new battery into the compartment.
  • Page 54 F THE ITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED YOU MAY NOT BE ABLE TO USE YOUR NOTEBOOK OR CHARGE YOUR BATTERY Battery Release Latch Battery Pack Battery Release Latch Figure 11. Removing a Battery 54 - Lithium ion Battery...

  • Page 55: Memory Upgrade Module

    Memory Upgrade Module Your Fujitsu PH520 notebook comes with 2 GB (1GB x 2) of high speed Double Data Rate Synchronous Dynamic RAM 3 (DDR3 SDRAM), 1066 MHz factory installed. (Note that they are 1066 MHz modules, but they run at 800 MHz). To increase your system’s memory capacity, you may remove the original module(s) and replace with a memory upgrade module(s).
  • Page 56 While holding the clips out, remove the module from the slot by lifting it up and pulling towards the rear of your notebook. Store the memory module in a static guarded sleeve. Install a new module as outlined in the procedure below. Replace the cover.

  • Page 57: Installing A Memory Upgrade Module

    Installing a Memory Upgrade Module Remove the new memory upgrade module from the static guarded sleeve. Align the memory upgrade module with the component side up. Align the connector edge of the memory upgrade module with the connector slot in the compartment.

  • Page 58: Memory Stick/Secure Digital Cards

    SD Card Memory Stick Figure 15. Installing a Memory Stick/SD Card Memory Stick/Secure Digital Cards Your notebook supports Memory Stick (MS) and Secure Digital (SD) cards, on which you can store and transfer data to and from a variety of digital devices. These cards use flash memory architecture, which means they don’t need a power source to retain data.

  • Page 59: Inserting Ms/Sd Cards

    Inserting MS/SD Cards MS and SD Cards are inserted in the MS/SD Card slot (Figure 15). To insert a card, follow these steps • SD C ’ NSERTING OR REMOVING AN ARD DURING YOUR NOTEBOOK S SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND OR YOUR NOTEBOOK •...

  • Page 60: Device Ports

    Device Ports Your PH520 LifeBook notebook comes equipped with multiple device ports to which you can connect an external device including: disk drives, keyboards, printers, etc. Internal LAN (RJ-45) jack The internal LAN (RJ-45) jack is used for an internal 10/100 BaseTx Ethernet connection. You will need to configure your notebook to work with your particular network.

  • Page 61: Microphone Jack

    Microphone Jack The microphone jack allows you to connect an external mono microphone. Your microphone must be equipped with a 1/8”(3.5 mm) mono mini-plug in order to fit into the microphone jack of your notebook. In order to connect a microphone follow these easy steps: (Figure 4) Align the connector with the port opening.

  • Page 62: External Video Port

    External Video Port The external video port allows you to connect an external monitor or LCD projector. In order to connect an external device follow these easy steps: (Figure 18) Align the connector with the port opening. Push the connector into the port until it is seated.. HEN AN EXTERNAL MONITOR IS PLUGGED IN PRESSING THE...

  • Page 63: Hdmi Port

    HDMI Port The High-Definition Multimedia Interface (HDMI) port is a digital audio/video interface over which uncompressed streams can be transmitted. HDMI is used to connect compatible digital devices with your computer (such as big-screen TVs and video recorders). To connect an HDMI device: Align the connector with the port opening.

  • Page 64: Troubleshooting Your Notebook

    Chapter 4 Troubleshooting Your Notebook Troubleshooting There may be occasions when you encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices that can be solved by replacing the device. The information in this section helps you isolate and resolve some of these straightforward issues and identify failures that require service.
  • Page 65 If you have tried the solutions suggested in the Troubleshooting Table without success, contact your support representative: Toll free: 1-800-8Fujitsu (1-800-838-5487); web site: http://www.computers.us.fujitsu.com/support. Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution: •...

  • Page 66: Specific Problems

    Specific Problems Using the Troubleshooting Table When you have problems with your notebook, try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you difficulty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions.

  • Page 67: Problem

    Problem Possible Cause Possible Solutions Audio Problems There is no sound coming The volume is turned too low. Adjust the volume control on your notebook and operating from the built-in speakers. system. Use the [Fn+F9] key combination on your keyboard to increase the volume of your notebook.

  • Page 68: Memory Problems

    Problem Possible Cause Possible Solutions You have installed an  Your external device is not Re-install your device. See “Device Ports” on page 60. external keyboard or properly installed. mouse, and it does not Your operating system (OS) is Check your device and operating system documentation seem to work.

  • Page 69: Power Failures

    Problem Possible Cause Possible Solutions Power Failures You turn on your notebook The installed battery is com- Check the Status Indicator Panel to determine the presence and nothing seems to hap- pletely discharged or there is and condition of the battery. See “Status Indicator Panel” on pen.
  • Page 70 Problem Possible Cause Possible Solutions Your notebook turns off all You are operating on battery Install a power adapter, then push the Power/Sus- by itself. power and ignored a low bat- pend/Resume button. See “Power Sources” on page 39. (continued) tery alarm until the battery was at the dead battery state and the system has entered...

  • Page 71: Shutdown And Startup Problems

    Set the operating source by pressing the [ESC] key while the and displays power on of the setup utility are not Fujitsu logo is on screen or use the [F2] key and enter the information, but fails to compatible with your configu- setup utility and adjust the source settings from the Boot load the operating system.

  • Page 72: Video Problems

    Problem Possible Cause Possible Solutions Your notebook appears to The BIOS CMOS hold-up bat- Contact your support representative for repairs. This is not a change setup parameters tery has failed. user serviceable part but has a normal life of 3 to 5 years. when you start it.

  • Page 73: Miscellaneous Problems

    Problem Possible Cause Possible Solutions The display goes blank by Power timeouts are set for Press any button on the keyboard, or move the mouse to itself after you have been very short intervals and you restore operation. If that fails, push the Power/Sus- using it....

  • Page 74: Power On Self Test Messages

    Power On Self Test Messages The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual.
  • Page 75 *Keyboard error Keyboard not working. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative. Non-system disk or disk error Replace the disk and then press any key to continue. NTLDR is missing Press any key to restart.
  • Page 76 PXE-E78: Could not locate boot server Contact your support representative for more information. PXE-E89: Could not download boot image Contact your support representative for more information. *Real time clock error Real-time clock fails BIOS test. May require board repair. Contact your support representative. Remove disks or other media Remove disks or other media, then press any key to restart.

  • Page 77: Restoring Your System Image And Software

    Restoring Your System Image and Software It is very important that you create DVD copies of your Factory Image and Bootable Disc (along with other applicable media such as Drivers and Applications and Restore media and application discs) before beginning to use your system. To do so, follow the instructions in the “Saving Your Factory Image”...
  • Page 78 Saving your Factory Image When you purchased your new system, a copy of the pre-installed Factory Image was loaded into a hidden partition on your hard disk drive. Having a copy of the original Factory Image available to you means that in the event of system failure, you will be able to restore it to its original state.
  • Page 79 Be sure you have inserted the blank disc in the DVD drive, then click [Yes] to create the DAR disc. If you click [No], you will proceed to the Bootable Disc creation procedure. If you click [Cancel], you will return to the main menu.
  • Page 80 Recovering Your Factory Image In the event you need to restore your original Factory Image, perform the following steps. Note that there may be some third-party applications that need to be installed from the application media bundled with your system. LL USER CREATED DATA WILL BE DELETED FROM YOUR SYSTEM WHEN THE ACTORY...
  • Page 81 An image appears showing you graphically how the image will be stored. Click the [Next] button. Click [Execute] to start the backup. Managing Your Backup Images With the MyRecovery tool you can also make copies of backup images, archive them on DVD, or delete them from your hard drive.
  • Page 82 Determining whether Recovery and Utility is pre-loaded Turn on or reboot your system. When the Fujitsu logo appears, press [F12] key. From the Boot Menu that appears, check whether the option is present. If it is not present, it means that the utility must be used from the disc.

  • Page 83: Running Recovery/Utility From Bootable Disc

    To verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk drive), perform the following steps: Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left mouse or touchpad button; the SecureCore™ Menu will appear.

  • Page 84: Recovering Factory Image Using Recovery/Utility

    When the System Recovery Options dialog opens, select a new keyboard layout, if necessary, then click [Next]. When the Operating System dialog appears, click [Next]. If necessary, enter your password, then click [OK]. When System Recovery Options window appears, click on Recovery and Utility. When the Recovery and Utility screen appears, three tabs will be present: Diagnostics, Recovery, and Utility.
  • Page 85 Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left mouse or touchpad button; the SecureCore™ Menu will appear. Select the Boot Menu from the SecureCore Menu. Highlight the CD/DVD option.

  • Page 86: Automatically Downloading Driver Updates

    Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over the icons to find the correct one).

  • Page 87: Care And Maintenance

    Chapter 5 Care and Maintenance Caring for your PH520 LifeBook If you use your Fujitsu notebook carefully, you will increase its life and reliability. This section provides some tips for looking after the notebook and its devices. • N THE EVENT YOU DROP YOUR NOTEBOOK OR DAMAGE THE HOUSING IN ANY WAY...
  • Page 88 If your notebook will not boot after it has dried out, call your support representative. • Do not use your Fujitsu notebook in a wet environment (near a bathtub, swimming pool). • Always use the AC adapter and batteries that are approved for your notebook.

  • Page 89: Cleaning Your Notebook

    Cleaning your notebook • Always disconnect the power plug. (Pull the plug, not the cord.) • Clean your notebook with a damp, lint-free cloth. Do not use abrasives or solvents. • Use a soft cloth to remove dust from the screen. Never use glass cleaners. •...

  • Page 90: Storing Your Notebook

    In addition, a faulty battery might damage your notebook. • Store your Fujitsu notebook in a cool, dry location. Temperatures should remain between 13ºF  (-25ºC) and 140ºF (60ºC). •...

  • Page 91: Traveling With Your Notebook

    Traveling with your notebook • Do not transport your notebook while it is turned on. • It is recommended that you carry your notebook with you while traveling, rather than checking it in as baggage. • Always bring your System Recovery CD that came with your notebook when you travel. If you experience system software problems while traveling, you may need it to correct any problems.

  • Page 92: Batteries

    Batteries Caring for your Batteries • Always handle batteries carefully. • Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object). Do not carry lose batteries in a pocket or purse where they may mix with coins, keys, or other metal objects.

  • Page 93: Media Care

    Media Care Caring for your Media (optional) Media discs (DVD/CD/CD-R) are precision devices and will function reliably if given reasonable care. • Always store your media disc in its case when it is not in use. • Always handle discs by the edges and avoid touching the surface. •...

  • Page 94: System Specifications

    Chapter 6 System Specifications Specifications This section provides the hardware and environmental specifications for your Fujitsu PH520 LifeBook notebook. Specifications of particular configurations will vary. Configuration Label The configuration label located on the bottom of your notebook contains specific information regarding the options you’ve chosen for your notebook.

  • Page 95: Microprocessor

    Microprocessor AMD Athlon™ II Neo processor K125 Chipset AMD RS880M+SB820M Memory System Memory • DDR3-1066 MHz (clocked at 800 MHz) SDRAM memory module. • Two DIMM slots; upgradeable. Cache Memory 1 MB L2 cache on-die Video Built-in color flat-panel TFT active matrix LED backlight display with simultaneous display capability. Video Color and Resolution 11.6"...

  • Page 96: Audio

    Video Graphics Intel RS880 video graphics. The amount of shared video memory using Uniform Memory Access (UMA) is dependent upon the amount of system memory present, as follows. The table also indicates the amount of HyperMemory available, based upon installed memory: System Memory UMA Size HyperMemory...

  • Page 97: Device Ports

    Web Camera Integrated 1.3 MP web camera Theft Prevention Lock Lock slot for use with security restraint systems. Device Ports On the notebook: • Memory Stick/Secure Digital (MS/SD) Card slot • One 15-pin D-SUB connector for VGA external monitor (see Display specifications) •...

  • Page 98: Power

    Operating: 20% to 85%, relative, non-condensing. Non-operating: 8% to 85%, relative, non-condensing Altitude Operating: 10,000 feet (3,048 m) maximum Popular Accessories For ordering or additional information on Fujitsu accessories please visit our Web site at  www.shopfujitsu.com or call 1-800-FUJITSU. 98 - Specifications...

  • Page 99: Included Software

    Management software. The following list indicates the software included with your system. • Adobe Reader • CyberLink YouCam • Norton Internet Security™ (60-day free trial) • Roxio Creator • Fujitsu Driver Update Utility • Microsoft Office Starter 2010 • Windows Live Essentials Learning About Your Software Tutorials All operating systems and most application software have tutorials built into them upon installation.
  • Page 100 Fujitsu Driver Update Utility The Fujitsu Driver Update (FDU) utility is pre-installed on your system. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. See “Automatically Downloading Driver Updates”...

  • Page 101: Glossary

    Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your notebook. Access point Wireless network device used to bridge wireless and wired network traffic. ACPI Advanced Configuration and Power Interface Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen.
  • Page 102 ADSL Asymmetric Digital Subscriber Line. Technology for transporting high bit-rate services over ordinary phone lines. Accelerated Graphics Port. Graphics port specifically designed for graphics-intensive devices, such as video cards and 3D accelerators. Auto/Airline Adapter A device which converts the DC voltage from an automobile cigarette lighter or aircraft DC power outlet to the DC voltage needed to power your notebook.
  • Page 103 Byte 8 bits of parallel binary information. Cache Memory A block of memory built into the micro-processor which is much faster to access than your system RAM and used in specially structured ways to make your overall data handling time faster. CD-ROM Compact disk read only memory.
  • Page 104 Default Value A pre-programmed value to be used if you fail to set your own. DHCP Dynamic Host Configuration Protocol. A protocol used to automatically acquire parameters required for the communication, such as IP address. The sender of IP address is called a DHCP server, and the receiver is called a DHCP client.
  • Page 105 Domain Name System. A function to control the association between the IP address and the name assigned to the computer. If you do not know the IP address but if you know the computer name, you can still communicate to that computer. Disk Operating System (MS-DOS is a Microsoft Disk Operating System).
  • Page 106 Gigabyte. One billion bytes. Hard drive A spinning platter of magnetic data storage media where the platter is very stiff. Input/Output. Data entering and leaving your notebook in electronic form. Intelligent Drive Electronics. A type of control interface for a hard drive which is inside the hard drive unit.
  • Page 107 IP Address An identifier for a computer or device on a TCP/IP network. Networks using the TCP/IP protocol route messages based on the IP address of the destination. The format of an IP address is a 32-bit numeric address written as four numbers separated by periods. Each number can be zero to 255. For example, 1.160.10.240 could be an IP address.
  • Page 108 Liquid Crystal Display. A type of display which makes images by controlling the orientation of crystals in a crystalline liquid. Lithium ion Battery A type of rechargeable battery which has a high power-time life for its size and is not subject to the memory effect as Nickel Cadmium batteries.
  • Page 109 Monaural A system using one channel to process sound from all sources. Maximum Transmission Unit. The maximum data size that can be transferred at a time through the Internet or other networks. You can set a smaller MTU size to obtain successful communication, if you have difficulty transferring data due to the fact that the maximum size is too large.
  • Page 110 Pitch (keyboard) The distance between the centers of the letter keys of a keyboard. Pixel The smallest element of a display, a dot of color on your display screen. The more pixels per area the clearer your image will appear. POST Power On Self Test.
  • Page 111 RAM Module A printed circuit card with memory and associated circuitry which allows the user to add additional memory to the computer without special tools. Resume To proceed after interruption. In your notebook this refers to returning to active operation after having been in one of the suspension states.
  • Page 112 Standby To make inoperative for a period of time. Your notebook uses various suspension states to reduce power consumption and prolong the charge of your battery. Status Indicator A display which reports the condition of some portion of your hardware. On your notebook this is an LCD screen just above the keyboard.
  • Page 113 Thin Film Transistor. A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually. Underwriters Laboratories. An independent organization that tests and certifies the electrical safety of devices. Universal Serial Bus.

  • Page 114: Regulatory Information

    Regulatory Information Notice Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television This equipment has been tested and found to comply with the limit for class B digital devices, pursuant to parts 15 of the FCC Rules.

  • Page 115: Appendix A: Wlan User's Guide

    Appendix A: WLAN User’s Guide FCC Regulatory Information Please note the following regulatory information related to the optional wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
  • Page 116 Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
  • Page 117 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu America Inc. may invalidate the user's right to operate this equipment. Canadian Notice The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems.

  • Page 118: Before Using The Optional Wireless Lan

    Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and configure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure its correct operation. Keep this manual in a safe place for future reference.

  • Page 119: Wireless Lan Modes Using This Device

    Wireless LAN Modes Using this Device Ad Hoc Mode "Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks.
  • Page 120 Access Point (Infrastructure) Mode Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases).

  • Page 121: Deactivating The Wlan Device

    How to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The operating system that your mobile computer comes with has been pre-configured to support the WLAN device. •...

  • Page 122: Disconnection Using The Icon In The Taskbar

    WLAN/Bluetooth On/Off Switch Figure 22. Location of Wireless LAN/Bluetooth On/Off switch EFORE USING THE WIRELESS DEVICE YOU MUST FIRST INSTALL LICK TO ENSURE THAT THE “I !” CORRECT SOFTWARE FOR YOUR DEVICE IS INSTALLED NSTALLING LICK ON PAGE Disconnection Using the Icon in the Taskbar Note that disconnecting via the icon in the system tray does not turn off the radio;...

  • Page 123: Configuring The Wireless Lan

    Configuring the Wireless LAN The optional WLAN device can be configured to establish wireless network connectivity using the software that is built into Windows for most industry standard security solutions is contained in this software. Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters: Configuring the WLAN using Windows Procedure...

  • Page 124: Troubleshooting The Wlan

    Troubleshooting the WLAN Troubleshooting Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. If you are unfamiliar with the steps required, consult your System Administrator or go to [Start] -> Help and Support -> Networking and the Web Problem Possible Cause Possible Solution...
  • Page 125 Problem Possible Cause Possible Solution Unavailable RF interference from The use of identical or overlapping RF channels can cause interference with the network  Access Points or operation of the WLAN device. Change the channel of your Access Point to a connection other wireless channel that does not overlap with the interfering device.

  • Page 126: Wlan Specifications

    WLAN Specifications Specifications Item Specification Type of network The integrated Atheros Align™ 802.11bgn Wireless LAN device conforms to 802.11b, 802.11g, and 802.11n Wi-Fi based*. Transfer rate (Automatic switching) 54 Mbps maximum data rate • Active frequency 802.11n: 2.4 GHz or 5 GHz •...
  • Page 127 * “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed. ** The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective material, or interference from external RF sources.

  • Page 128: Using The Bluetooth Device

    Using the Bluetooth Device The Integrated Bluetooth module (QBTM400) is an optional device available for Fujitsu mobile computers. What is Bluetooth Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks (PANs) between devices in short-range of each other.
  • Page 129 Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty.

  • Page 130: Index

    Index Bluetooth Boot Sequence Built-in Speakers adapter plug adapters Air Vents CapsLock Indicator Anti-theft Lock Slot Click Me! Auto/Airline Adapter Clicking Configuration Label Contact Information Battery Controls and Connectors alarm Conventions Used in the Guide care Cursor Charge/DC-In Indicator Cursor Keys cold-swapping conserving power dead...
  • Page 131 LAN (RJ-45) Jack Fujitsu Contact Information Lithium ion Battery Bay Fujitsu Driver Update utility Local Area Network (LAN) Fujitsu Shopping Online Function Key Memory checking capacity compartment installing problems removing upgrade module Memory Stick Microphone Jack Glossary Microsoft Office Starter...
  • Page 132 Power Management Starting Power On Self Test Status Iindicators Power/Suspend/Resume Button Status Indicators Pre-Installed Software Suspend/Resume Button Adobe Acrobat Reader manuals Touchpad buttons Registration controls Regulatory Information Troubleshooting Removing a Memory Stick Restarting Restoring Your Pre-installed Software Universal RJ-45 USB 2.0 Ports problems SD Card Slot SDRAM...

This manual is also suitable for:

Lifebook ph520

Table of Contents