D-Link DSN-2100-10 - xStack Storage Area Network Array Hard Drive Datasheet
Datasheet
Hide thumbs
Also See for DSN-2100-10 - xStack Storage Area Network Array Hard Drive:
- User manual (166 pages) ,
- Hardware reference manual (36 pages) ,
- Software user's manual (158 pages)
Quick Links
See also:
Software User Manual, User Manual
Features
• Handles Over 80,000 I/Os per Second
• Battery Protected Cache Memory:
512MB standard
• System Memory: 512MB standard
• 8 Hot-Swap SATA Hard Drive Bays
• Supports 16TB Capacity with 2TB Hard
Drives
• SATA-II Support
• Dual 400 Watt Power supplies
• Industry Standard 2U 19-inch Chassis
RAID Support
• 0, 1, 1+0, and 5
High Performance iSCSI Interface
• Four 1GbE Ports
Storage Network Management
• IP SAN Device Manager (IDM)
• Remote Monitoring and Configuration
• CHAP Authentication Helps Halt
Intruders
• SSL Security to Management Console
b u s i n e s s
xStack Storage® 4x1GbE iSCSI SAN Array with 8 SATA Bays
Introduction
D-Link's DSN-2100-10 iSCSI SAN array is an entry-level
network storage solution in a 2U rackmount form
factor, ideal for small to medium sized businesses.
The heart of the DSN-2100-10 is a powerful 10Gbit
iSCSI System-on-a-Chip (SoC) capable of handling
over 80,000 I/Os per second. The DSN-2100-10
currently supports 16TB of raw capacity using 2TB
drives. The DSN-2100-10 can be easily implemented
as nearline storage or as a supplemental backup
platform for quick restores.
iSCSI for IP Networks
Storage Area Networks (SANs) have traditionally
been reserved for complex Fibre Channel networks.
The recent introduction of iSCSI has extended the
powerful centralized storage capabilities of SAN
technology to IP networks. By utilizing existing
Ethernet technology, the costs associated with Fibre
Channel switching, separate host bus adapters,
expensive storage subsystems and administration
is significantly reduced. iSCSI SANs leverage the
Ethernet infrastructure and standards that are already
familiar to most IT personnel.
Four 1GbE Interfaces
The DSN-2100-10 supports Multi-path I/O (MPIO),
Multiple Connections per Session (MCS), and Link
Aggregation Groups (LAG) for unmatched network
flexibility, performance and resiliency, allowing its
four 1GbE data ports to be grouped together for up
to 425MB/s bandwidth.
System-on-a-Chip (SoC) Implementation
By utilizing a SoC design, the DSN-2100-10 combines
both networking and storage functions into a
single specialized Application Specific Integrated
Circuit (ASIC). This SoC combines 10Gbps iSCSI,
TCP & IP offload, embedded processors and storage
D SN -2100- 10
i SC SI SAN Ar ray
virtualization firmware onto a single chip. The
tight integration of these functions eliminates
interoperability, timing and support issues found
in competitive products that offer a "discrete
implementation" wherein various components are
selected separately, then assembled.
RAID support
The DSN-2100-10 features eight hot swappable Serial
ATA (SATA) disk drive bays and is capable of supporting
16TB of raw capacity using 2TB drives in RAID level
0, 1, 1+0 and 5 configurations (striped sets, mirrored
sets, striped mirrored sets and parity sets) for data
protection and performance.
Embedded Centralized Storage Management
The embedded, user-friendly IP-SAN Device Manager
(IDM) provides a comprehensive console for system
management. Boasting a rich set of management
features, this suite of utilities allows monitoring and
control of the SAN array via the Storage Management
Initiative-Specification (SMI-S) command set. With
a secure server, users can remotely configure and
monitor their SAN arrays over the Internet.
Advanced Management Features
The DSN-2100-10 also provides an advanced set
of features for efficient management and optimal
storage performance.
For the fastest RAID performance offered in the
industry, D-Link's adaptive cache management
provides write coalescing and multi-stream read-
ahead on a volume basis, optimizing cache utilization
and performance in an application-dependant
manner. Volatile cache data protection is afforded via
an on-board battery supporting cache memory for a
minimum of 72 hours. A write-back or write-through
cache memory policy can be selected manually
Related Manuals for D-Link DSN-2100-10 - xStack Storage Area Network Array Hard Drive
Summary of Contents for D-Link DSN-2100-10 - xStack Storage Area Network Array Hard Drive
- Page 1 • Battery Protected Cache Memory: Introduction virtualization firmware onto a single chip. The 512MB standard D-Link’s DSN-2100-10 iSCSI SAN array is an entry-level tight integration of these functions eliminates • System Memory: 512MB standard network storage solution in a 2U rackmount form interoperability, timing and support issues found •...
- Page 2 CPU overhead. unresponsive SATA commands by forcing a response within a preset time limit. D-Link’s volume virtualization technology utilizes the concept of storage extents, which are the An iSCSI SAN array can prove to be a valuable tool to fundamental building blocks used to enable features supplement a network storage foundation.
-
Page 3: Technical Specifications
D SN -2100- 10 i SC SI SAN Ar ray Technical Specifications Features Drive Bays • 8 Drive Interface Support • SATA-II Support System Memory • 512MB standard Cache Memory • 512MB standard Battery Backup for Cache • Standard (approximately 72 hours on full charge) Bandwidth •... -
Page 4: Storage Management
D SN -2100- 10 i SC SI SAN Ar ray Volume & RAID Support RAID Controller • Single- Integrated in ASIC RAID Support • RAID Levels 0, 1, 1+0 and 5 (Striped sets, mirrored sets, striped mirrored sets and parity sets) Volumes •... -
Page 5: Warranty And Support
For more information b u s i n e s s D-Link Systems | 17595 Mt. Herrmann Street | Fountain Valley, CA 92708 | 800.326.1688 | dlink.com ©2010 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries.