D-Link DSN-6020 Brochure & Specs

D-Link DSN-6020 Brochure & Specs

Dsn-6000 series ha-capable 4x1gbe or 2x10gbe iscsi san array
Hide thumbs Also See for DSN-6020:

Quick Links

Product Highlights
• Complete solution includes Writeable Snapshots,
Volume Cloning and Replication at no-cost
• Active-Active controller operation in HA
configuration for redundancy and maximum
performance
• Online firmware upgrades in HA configuration
for superior uptime
DSN-6000 Series
HA-Capable 4x1GbE or 2x10GbE iSCSI SAN Array
with 12 SAS/SATA Bays (expandable to 60 bays)
Features
• Hot-Pluggable Design
• Battery Protected Cache Memory: 4GB per Controller
• 12 Hot-Swap SAS/SATA
Hard Drive Bays
1
• Supports 36TB Capacity with 3TB
• Industry Standard 2U 19-inch Chassis
• Hardware iSCSI Offload Engine
Transactional Performance
• DSN-6110: Up to 200,000
• DSN-6410: Up to 220,000
Additional DSN-6020 Expansion JBODs:
• Up to Four Additional JBODs (60 Drives Total)
• Up to 180TB Total Capacity Using 3TB
High Performance iSCSI Interface:
• DSN-6110: Four 1GbE Data Ports per Controller
• Add a DSN-610 Controller for High Availability
(Active/Active Operation)
• DSN-6410: Two 10GbE Data Ports per Controller
• Add a DSN-640 Controller for High Availability
(Active/Active Operation)
Hard Drives
1
Drives
1
Overview
D-Link's DSN-6000 Series (DSN-6110 & DSN-6410) iSCSI SAN array is a highly available,
data center-class network storage solution in a 2U rack mount form factor that is simple
to deploy and manage, ideal for small to medium enterprises seeking nearline or primary
storage. It uses an intuitive management GUI to ensure the system can be up and online
in little time, even with limited IT knowledge. The DSN-6000 Series supports 36TB of raw
capacity using 3TB
drives and overall scalability to 180TB using additional DSN-6020
1
expansion JBODs.
All DSN-6000 storage solutions are supplied complete with snapshot, volume cloning
and remote replication capabilities, without the need for costly software licenses. Also,
each RAID controller is equipped with 4GB cache to ensure maximum read and write
performance right out of the box.
iSCSI for IP Networks
Storage Area Networks (SANs) have traditionally been reserved for complex Fibre
Channel networks. The introduction of iSCSI has extended the powerful centralized
storage capabilities of SAN technology to IP networks. By utilizing existing Ethernet
technology, the costs associated with Fibre Channel switching, separate host bus
adapters, expensive storage subsystems and administration is significantly reduced.
iSCSI SANs leverage the Ethernet infrastructure and standards that are already familiar
to most IT personnel.
loading

Summary of Contents for D-Link DSN-6020

  • Page 1 12 SAS/SATA Bays (expandable to 60 bays) Features Overview D-Link’s DSN-6000 Series (DSN-6110 & DSN-6410) iSCSI SAN array is a highly available, • Hot-Pluggable Design • Battery Protected Cache Memory: 4GB per Controller data center-class network storage solution in a 2U rack mount form factor that is simple to deploy and manage, ideal for small to medium enterprises seeking nearline or primary • 12 Hot-Swap SAS/SATA...
  • Page 2: High Availability

    DSN-6000 Series iSCSI SAN Array A Choice of Host Interfaces – Four 1GbE or Two 10GbE Redundant Architecture: • RAID Controllers Both the DSN-6110 and DSN-6410 each support Link Aggregation Groups (LAG), Multi- • Dual-Controller Configuration: DSN-6110 + DSN-610 Path I/O (MPIO) and Multiple Connections per Session (MCS) for flexibility, performance • Dual-Controller Configuration: DSN-6410 + DSN-640 and resiliency.
  • Page 3: Additional Features

    The DSN-6110 & DSN-6410 primary arrays each support 12 internal SAS/SATA be implemented manually or through automated scheduling which allows hard drives and with the addition of up to four DSN-6020 expansion arrays, hourly or daily configuration. In addition, the snapshot technology follows can scale to a total of 180TB of raw storage capacity using 3TB drives.
  • Page 4: Technical Specifications

    SAN Array Technical Specifications DSN-6110 • Four 1GbE Copper iSCSI Ports DSN-6410 • Two 10GbE iSCSI Ports (Comes standard with one SFP+ transceiver and one LC fiber cable) Features Processor • Intel IOP Drive Bays • 12, Expandable with DSN-6020 Expansion JBODs to 60 Drive Interface Support • SAS/SATA Cache Memory • 4GB per controller Cooling Fans • 2 Battery Backup for Cache • Yes SBB Compliant Controllers • Yes...
  • Page 5 DSN-6000 Series iSCSI SAN Array Auto Volume Rebuilding • Yes RAID Level Migration • Online volume migration without system downtime D-Link Green Auto Disk Spin Down • Yes Temperature Controlled Fans • Yes Power Supplies • 80 PLUS energy-efficient power supplies High Availability Active/Active RAID Controllers • Yes, with redundant dual controllers installed Flexible RAID Group Ownership • Yes, with dual controllers installed...
  • Page 6: International Approvals

    DSN-6000 Series iSCSI SAN Array SNMP Trap • Yes Browser Pop-Up Windows • Yes Syslog • Yes Windows Messenger • Yes Operating Systems Supported OS Support • Windows, Linux, Solaris, Mac Virtualization • VMware, Hyper-V, Citrix Power Supply Supply Type • Dual Hot-Swappable 2x500W AC Input • 100-240V ~7A-4A 500W with PFC (Auto Switching) DC Input • 3.3V-25A; 5V-32A; 12V-40A Environmental Operating Temperature • 32° to 104°F (0° to 40°C)
  • Page 7: Ordering Information

    U.S.A. | 17595 Mt. Herrmann Street | Fountain Valley, CA 92708 | 800.326.1688 | dlink.com Canada | 2525 Meadowvale Blvd | Mississauga, ON L5N 5S2 | 800.361.5265 | dlink.ca ©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, the D-Link logo, and D-ViewCam are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the property of their respective owners.

This manual is also suitable for:

Dsn-610Dsn-6110Dsn-640Dsn-6410Dsn-654