D-Link DIR-501 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Router
  5. DIR-501
  6. User manual

D-Link DIR-501 User Manual

Version 1.0
Hide thumbs Also See for DIR-501:
Table of Contents

Quick Links

Table of Contents
loading

Related Manuals for D-Link DIR-501

Summary of Contents for D-Link DIR-501

  • Page 2: Table Of Contents

    PPPoE ............20 Log ..............49 PPTP ............21 Traffic Statistics ..........50 L2TP ............. 22 Active Session ..........50 Wireless Setup ..........23 Wireless ............51 LAN Setup ............28 DHCP Server Settings ........29 D-Link DIR-615 User Manual...
  • Page 3 Changing the Computer Name and Joining a Workgroup ..............66 Configuring the IP Address in Vista ......68 Setting Up a Connection or Network Wirelessly ..71 Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK) ........... 76 D-Link DIR-615 User Manual...

  • Page 4: Package Contents

    Note: Using a power supply with a different voltage rating than the one included with the DIR-501 will cause damage and void the warranty for this product. Note: Always attach the power cord plug to the power supply, before inserting the power cord and connected power supply to the wall outlet.

  • Page 5: Features

    • Compatible with 802.11b and 802.11g Devices - The DIR-501 is still fully compatible with the IEEE 802.11b and IEEE 802.11g standard, so it can connect with existing 802.11b and IEEE 802.11g PCI, USB and Cardbus adapters.

  • Page 6: Hardware Overview

    Receptor for the Power Adapter. The Auto MDI/MDIX WAN LAN Ports port is the connection for Connect Ethernet devices such as the Ethernet cable to the computers, switches, and hubs. Cable or DSL modem. D-Link DIR-615 User Manual...

  • Page 7: Leds

    Power LED Local Network LEDs A solid light indicates a proper A solid light indicates a connection to an connection to the power supply. Ethernet-enabled computer on ports 1-4. This LED blinks during data transmission. D-Link DIR-615 User Manual...

  • Page 8: Installation

    If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Ethernet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-615 User Manual...

  • Page 9: Wireless Installation Considerations

    1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

  • Page 10: Wall Mounting Your Device

    Section 2 - Installation Wall Mounting Your Device You can mount the DIR-501 to a wall or a partition for easy and convenient placement of your device. To wall mount your device, A. Screw the provided screws with the equipment to the wall or partition where the device to be placed.

  • Page 11: Connect To Cable/Dsl/Satellite Modem

    8. Verify the link lights on the router. The power light, WAN light, and the LAN light (the port that your computer is plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections are correct. 9. Skip to page 16 to configure your router. D-Link DIR-615 User Manual...

  • Page 12: Connect To Another Router

    Section 2 - Installation Connect to Another Router If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network: •...
  • Page 13 7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the WAN port of the D-Link router. 8. You may now use the other three LAN ports to connect other Ethernet devices and computers. To configure your wireless network, open a web browser and enter the IP address you assigned to the router.

  • Page 14: Configuration

    Section 3 - Configuration Configuration This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).
  • Page 15 Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. D-Link DIR-615 User Manual...
  • Page 16 Section 3 - Configuration If you selected PPTP, enter your PPTP username and password. Click Next to continue. If you selected L2TP, enter your L2TP username and password. Click Next to continue. D-Link DIR-615 User Manual...
  • Page 17 If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue. Click Connect to save your settings. Please allow 1-2 minutes for rebooting. When the router has finished rebooting, the opening window will be displayed. D-Link DIR-615 User Manual...

  • Page 18: Static (Assigned By Isp)

    Enter the Primary DNS server IP address assigned by your Address: ISP. This is optional. Secondary DNS Address: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 MTU: is the default MTU. D-Link DIR-615 User Manual...

  • Page 19: Internet Setup

    MAC address unless required by your ISP. Enter the DNS (Domain Name Server) server IP address assigned by your ISP. Addresses: MTU: Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP. D-Link DIR-615 User Manual...

  • Page 20: Pppoe

    Auto-reconnect. MTU: Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. Connection Select either Always-on, Manual, or Connect-on demand. Mode Select: D-Link DIR-615 User Manual...

  • Page 21: Pptp

    Time: connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. MTU: Maximum Transmission Unit - You may need to change the MTU for optimal performance. Connect Mode: Select either Always-on, Manual, or Connect-on demand. D-Link DIR-615 User Manual...

  • Page 22: L2Tp

    To disable this feature, enable Auto-reconnect. MTU: Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP. Connect Mode: Select either Always-on, Manual, or Connect-on demand. D-Link DIR-615 User Manual...

  • Page 23: Wireless Setup

    WEP, WPA, WPA2, and WPA/WPA2 wireless security mode options. Click Next to continue. Enter a Wireless Network Name in the textbox, which is also know as the SSID, and then click Next to continue. D-Link DIR-615 User Manual...
  • Page 24 Save to continue. The Router will save your new settings and reboot. When it is finished after 1-2 minutes, the opening Wireless Setup window is displayed. D-Link DIR-615 User Manual...
  • Page 25 Enable Hidden Check this option if you would not like the SSID of your wireless network to be broadcasted by the DIR-501. If this option is Wireless: checked, the SSID of the DIR-501 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-501 in order to connect to it.
  • Page 26 It is recommended to enable encryption on your wireless did on the Router. Router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. D-Link DIR-615 User Manual...
  • Page 27 WPA, WPA2, or WPA/WPA2 (whichever of the three options you have selected above) on your adapter and enter the same network key as you did on the router. D-Link DIR-615 User Manual...

  • Page 28: Lan Setup

    Check the box to transfer the DNS server Relay: information from your ISP to your computers. If unchecked, your computers will use the router for a DNS server. Refer to the next page for DHCP information. D-Link DIR-615 User Manual...

  • Page 29: Dhcp Server Settings

    Section 3 - Configuration DHCP Server Settings DHCP stands for Dynamic Host Control Protocol. The DIR-501 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address...

  • Page 30: Time And Date

    Saving: settings to copy your PC’s time settings. Tick the “Automatically synchronize with Server D-Link’s Internet time server” checkbox and Used: then use the drop-down menu to select an NTP Server. NTP is short for Network Time Protocol. NTP synchronizes computer clock times in a network of computers.

  • Page 31: Parental Control

    The schedule of time when the parental control Schedule: filter will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-615 User Manual...

  • Page 32: Port Forwarding

    Start Port/ Enter the port or ports that you want to open. If End Port: you want to open one port, enter the same port in both boxes. Traffic Type: Select TCP, UDP, or Any D-Link DIR-615 User Manual...

  • Page 33: Application Rules

    Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-501. Rule: Check the box to enable the rule.

  • Page 34: Access Control

    The schedule of time when the network filter will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-615 User Manual...

  • Page 35: Traffic Control

    Bandwidth: key in Key in the value to setup the bandwidth manually. bandwidth manually: Taffic Control When the option Automatic Distribute Bandwidth is Rules: unchecked, you can control the access bandwidth of the specific IP address. D-Link DIR-615 User Manual...

  • Page 36: Setup Wizard

    Section 3 - Configuration Setup Wizard You may run the setup wizard from the opening quick setup window to quickly set up your router. You will be directed to the first window of the wizard automatically. D-Link DIR-615 User Manual...

  • Page 37: Firewall & Dmz

    This section will allow you to set up a DMZ host and to set up firewall rules. If you have a client PC that cannot run Internet applications properly from behind the DIR-501, then you can set the client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes.

  • Page 38: Advanced Wireless

    20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting. Channel Width: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may create higher data loss. Short GI: D-Link DIR-615 User Manual...

  • Page 39: Advanced Network

    UPNP provides compatibility with networking equipment, software and peripherals. Enable WAN Unchecking the box will not allow the DIR-501 to Ping Respond: respond to Pings. Blocking the Ping may provide some extra security from hackers. Tick this checkbox to allow the WAN port to be “Pinged”.

  • Page 40: Routing

    The IP address of the packets that will take this Destination: route. The subnet of the IP address of the packets that Subnet Mask: will take this route. Specifies the next hop to be taken if this route is Gateway: used. D-Link DIR-615 User Manual...

  • Page 41: Device Administration

    Router. Putting an asterisk (*) into this field would present a security risk and is not recommended. The port number used to access the DIR-501. For example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of Port: the DIR-501 and 8080 is the port used for the Web-Management interface.

  • Page 42: Save And Restore

    If you want to save the current router configuration settings, use the Save button above. Reboots: Click the Reboots button on the left side of the window to restart the Router. D-Link DIR-615 User Manual...

  • Page 43: Firmware Update

    You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com.

  • Page 44: Ddns Setting

    Dyn.Dns.org(free), and Dyn.Dns. org(Static). Host Name: Enter the host name of the DDNS server. Username: Enter the username given to you by your DDNS server. Password: Enter the password or key given to you by your DDNS server. D-Link DIR-615 User Manual...

  • Page 45: System Check

    Ping Test: The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping. D-Link DIR-615 User Manual...

  • Page 46: Schedules

    Tick this check box if the new schedule rule applies to the full 24-hour period. Start Time/ If the new schedule rule does not apply to the full End Time: 24-hour period, untick the previous checkbox and then enter a specific beginning and ending time. D-Link DIR-615 User Manual...

  • Page 47: Log Settings

    Click the checkbox(es) of the type of log information Level: requested: “System, Firewall & Security, Router Status, Critical, Warning and Information” Send by Mail: Enter the your SNTP server name(or IP address) and enter your mail address before sending your system log by mail. D-Link DIR-615 User Manual...

  • Page 48: Device Info

    Device Info This window displays the current information for the DIR-501. It will display the LAN, WAN, and Wireless information. If your WAN connection is set up for a Dynamic IP address then a DHCP Release button and a DHCP Renew button will be displayed.

  • Page 49: Log

    View the last page of the log. Previous: View the previous page. Next: View the next page. Clear: Clear the log. Link to Log Click this button to go directly to the Log Settings Settings: window (Maintenance > Log Settings). D-Link DIR-615 User Manual...

  • Page 50: Traffic Statistics

    Traffic Statistics The window below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-501 on both the WAN and the LAN ports. The traffic counter will reset if the device is rebooted.

  • Page 51: Wireless

    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless client. D-Link DIR-615 User Manual...

  • Page 52: Help

    Section 3 - Configuration Help Click the desired hyperlink to get more information about how to use the Router. D-Link DIR-615 User Manual...

  • Page 53: Wireless Security

    Section 4 - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-501 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) •...

  • Page 54: Configure Wep

    6. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router. D-Link DIR-615 User Manual...

  • Page 55: What Is Wpa

    WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-615 User Manual...

  • Page 56: Configure Wpa-Psk And Wpa2-Psk

    6. Click Save Settings to save your settings. If you are configuring the Router with a wireless adapter, you will lose connectivity until you enable WPA-PSK or WPA2-PSK on your adapter and enter the same passphrase as you did on the Router. D-Link DIR-615 User Manual...

  • Page 57: Configure Wpa/Wpa2-Psk

    6. Click Save Settings to save your settings. If you are configuring the Router with a wireless adapter, you will lose connectivity until you enable WPA/WPA2-PSK on your adapter and enter the same passphrase as you did on the Router. D-Link DIR-615 User Manual...

  • Page 58: Configure Wpa, Wpa2, And Wpa/Wpa2 (Radius)

    RADIUS server. 1812 is the default port. 7. Next to Shared Secret, enter the security key. 8. If you have a secondary RADIUS server, enter its IP address, port, and secret key. 9. Click Save Settings to save your settings. D-Link DIR-615 User Manual...

  • Page 59: Connect To A Wireless Network

    Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-615 User Manual...

  • Page 60: Configure Wep

    XP Wireless Utility by right-clicking ® on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-615 User Manual...
  • Page 61 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WEP settings are correct. The WEP key must be exactly the same as on the wireless router. D-Link DIR-615 User Manual...

  • Page 62: Configure Wpa-Psk

    XP Wireless Utility by right-clicking ® on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-615 User Manual...
  • Page 63 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-615 User Manual...

  • Page 64: Setting Up Wi-Fi Protection

    (WCN 2.0 in Windows Vista) The DIR-501 supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista. The instructions for setting this up depend on whether you are using Windows Vista to configure the Router or third party software.

  • Page 65: Setting Up A Configured Router

    Wi-Fi protected network. If you are using third party software, run the appropriate Wi-Fi Protected System utility. You will be asked to either use the push button method or to manually enter the PIN. Follow the on-screen instructions. D-Link DIR-615 User Manual...

  • Page 66: Changing The Computer Name And Joining A Workgroup

    Section 7 - Changing the Computer Name and Joining a Workgroup Changing the Computer Name and Joining a Workgroup The following are step-by-step directions to change the computer name and join a workgroup. 1. Click on Properties. 2. Click on the Advanced system settings link. D-Link DIR-615 User Manual...
  • Page 67 When you are finished, click the Change button. 4. Go to the Computer Name/Domain Changes window and click the radio button next to the Workgroup you want to join. When you are finished, click the OK button. D-Link DIR-615 User Manual...

  • Page 68: Configuring The Ip Address In Vista

    The following are step-by-step directions to configure the IP address in Windows Vista. 1. Click on Properties. 2. Go to the Network and Internet window and click the appropriate Local Area Connection icon. 3. Right-click the Local Area Connection icon and then select Properties from the drop-down menu. D-Link DIR-615 User Manual...
  • Page 69 Local Area Connections Properties window and enter the desired IP address in the space offered. Then click the “Use the following DNS server adresses” option on the same tab and enter the desired DNS server information. D-Link DIR-615 User Manual...
  • Page 70 7. Go to the Local Area Connection Status window and click the Details button. 8. Confirm your new settings on the Network Connection Status window. When you are finished, click the Done button. D-Link DIR-615 User Manual...

  • Page 71: Setting Up A Connection Or Network Wirelessly

    2. Go to the Set up a connection or network window and choose the Set up a wireless router or access point Set up a new wireless network for your home or business option. Click the Next button. D-Link DIR-615 User Manual...
  • Page 72 3. Click the Next button on the Set up a wireless router or access point window. 4. The following window displays the system progress. 5. This window confirms that you want to create wireless network settings that are savable to a USB flash drive. D-Link DIR-615 User Manual...
  • Page 73 Click the Show advanced network security options link. 8. Select security method on the Choose advanced network security options window in the Set up a wireless router or access point wizard. Click the Next button. D-Link DIR-615 User Manual...
  • Page 74 Insert the USB flash drive into this computer window in the Set up a wireless router or access point wizard to select a destination for your network settings. Click the Next button. D-Link DIR-615 User Manual...
  • Page 75 13.Once you are finished, the To add a device or computer, follow these instructions window in the Set up a wireless router or access point wizard opens. When you are finished, click the Close button. D-Link DIR-615 User Manual...

  • Page 76: Connecting To A Secured Wireless Network (Wep, Wpa-Psk & Wpa2-Psk)

    Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK) The following are step-by-step directions to set up a wireless connection. 1. Click on Properties. 2. Click the Manage network connections link in the Network and Sharing Center window. D-Link DIR-615 User Manual...
  • Page 77 4. Select a network to connect to in the Select a network to connect to window in the Connect to a network wizard and then click the Connect button. 5. The following Connect to a network wizard window displays the system progress. D-Link DIR-615 User Manual...
  • Page 78 Connect to a network wizard is displayed. Choose to save to the network and/or start the new connection automatically. When you are finished, click the Close button. 8. The successful connection is displayed at the bottom of the Windows start up menu. D-Link DIR-615 User Manual...
  • Page 79 Section 10 - Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK) 9. Confirm your new settings by calling up the command prompt and then entering the ipconfig command. 10.To test the new IP address, use the Ping feature of the command prompt. D-Link DIR-615 User Manual...

  • Page 80: Connecting To An Unsecured Wireless Network

    Connecting to an Unsecured Wireless Network The following are step-by-step directions to set up an unsecured wireless connection. 1. Click on Properties. 2. Go to the Network and Sharing Center window and click the Manage Network Connections link. D-Link DIR-615 User Manual...
  • Page 81 4. Select a network to connect to in the Select a network to connect to window in the Connect to a network wizard and then click the Connect button. 5. Confirm your desire to connect anyway on the following Network Connection Status window. D-Link DIR-615 User Manual...
  • Page 82 Connect to a network wizard is displayed. Choose to save to the network and/or start the new connection automatically. When you are finished, click the Close button. 8. The successful connection is displayed at the bottom of the Windows start up menu. D-Link DIR-615 User Manual...
  • Page 83 Section 11 - Connecting to an Unsecured Wireless Network 9. Confirm your new settings by calling up the command prompt and then entering the ipconfig command. 10.To test the new IP address, use the Ping feature of the command prompt. D-Link DIR-615 User Manual...

  • Page 84: Troubleshooting

    1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself.
  • Page 85 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your the web management.
  • Page 86 • Windows ® ® press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-615 User Manual...
  • Page 87 • To change the MTU enter the number in the MTU field and click the Save Settings button to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-615 User Manual...

  • Page 88: Wireless Basics

    Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.

  • Page 89: What Is Wireless

    Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
  • Page 90 Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access •...

  • Page 91: Tips

    The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like airports, hotels, coffee shops, libraries, restaurants, and convention centers.

  • Page 92: Wireless Modes

    An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-615 User Manual...

  • Page 93: Networking Basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 94: Statically Assign An Ip Address

    2000 - From the desktop, right-click My Network Places > Properties. ® Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.

  • Page 95: Technical Specifications

    802.11 g : 16QAM / 64QAM / BPSK / QPSK with OFDM • Web-based Internet Explorer v6 or later; Netscape 802.11 n : 16QAM / 64QAM / BPSK / QPSK with OFDM Navigator v6 or later; or other Java-enabled browsers • DHCP Server and Client D-Link DIR-615 User Manual...
  • Page 96 * Maximum wireless signal rate derived from IEEE Standard 802.11b, 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DIR-615 User Manual...
  • Page 97 The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DIR-615 User Manual...
  • Page 98 Les conditions de fonctionnement sont sujettes à deux conditions: (1) Ce périphérique ne doit pas causer d’interférence et. (2) Ce périphérique doit accepter toute interférence, y compris les interférences pouvant perturber le bon fonctionnement de ce périphérique. D-Link DIR-615 User Manual...

Table of Contents