GE JEM31WF - Spacemaker II Microwave Oven Installation Instructions
Installation built-in trim kits
Hide thumbs
Also See for JEM31WF - Spacemaker II Microwave Oven:
- Specification (2 pages) ,
- Owner's manual (36 pages) ,
- Installation instructions (2 pages)
Quick Links
See also:
Owner's Manual
Installation
Instructions
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
❒ BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
•
for local inspector's use.
IMPORTANT
•
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions for
future reference.
• Skill level – Installation of this appliance requires
basic mechanical and electrical skills.
• Completion time – 1 to 3 hours
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
• This kit is UL listed for installation alone
or over any GE/GE Profile single electric wall oven.
• For easier installation and personal safety, we
recommend that two people install this microwave
oven.
• Unplug the microwave oven before attempting
installation of this kit.
• This kit is for use on models: PEB1590DMBB,
PEB1590DMWW and PEB1590SMSS.
• Do not alter or modify any part of this kit or the
oven.
WARNING
— This oven must
be plugged into a properly grounded 3-hole, 120V
receptacle as required by the National Electrical Code.
FOR YOUR SAFETY:
WARNING
— Before beginning the
installation, switch power off at service panel and lock
the service disconnecting means to prevent power
from being switched on accidentally. When the
service disconnecting means cannot be locked,
securely fasten a prominent warning device,
such as a tag, to the service panel.
— Save these instructions
— Observe all governing
Built-In Trim Kits
JX1527 JX1530
PARTS INCLUDED
PART
NOTE: This kit has extra screws to prevent the
technician from spending extra time locating a
replacement screw during installation.
KEEP THESE INSTRUCTIONS.
1
QUANTITY
❒ Trim Frame
❒ Bottom Duct
❒ Top Bracket
❒ Bottom Bracket
❒ Upper Duct
❒ Rear Duct
❒ 4 mm x 14 mm
22 required
Round-Head
2 extra
Screws
❒ 4 mm x 14 mm
4 required
Flat-Head
2 extra
Screws
❒ Anti-Tip Brace
❒ Anti-Tip Bracket
❒ Template
READ CAREFULLY.
1
1
1
1
1
1
1
1
1
Related Manuals for GE JEM31WF - Spacemaker II Microwave Oven
Summary of Contents for GE JEM31WF - Spacemaker II Microwave Oven
-
Page 1: Installation Instructions
Installation Built-In Trim Kits Instructions JX1527 JX1530 Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com ❒ BEFORE YOU BEGIN PARTS INCLUDED Read these instructions completely and carefully. PART QUANTITY IMPORTANT • — Save these instructions ❒ Trim Frame for local inspector’s use. -
Page 2: Tools You Will Need
Installation Instructions ❒ TOOLS YOU WILL NEED CUTOUT DIMENSIONS (CONT.) ″ on all sides for On 27″ models, allow 1 ⁄ overlap of the trim frame over the edges of ❒ #2 Phillips Screwdriver the cutout. ″ at the top and On 30″... -
Page 3: Install Microwave Oven
Installation Instructions ❒ ❒ INSTALL BOTTOM DUCT INSTALL UPPER DUCT AND ASSEMBLY TO MICROWAVE OVEN TOP BRACKET Fasten the anti-tip bracket to the bottom Remove two screws from back of the duct using four round-head screws. microwave oven. Peel off the adhesive backing from the upper duct and secure FRONT it to the microwave oven by pressing it... - Page 4 Installation Instructions ❒ ❒ CHECK LEVELING INSTALL THE TRIM FRAME Check the leveling by placing a level at the Place the trim frame over the microwave front and sides of the microwave. It may be oven with the vent openings at the necessary to add wood shims under the bottom.