Quick Links
GB
1
Technical data
KERN
20K10
Readability
10 g
Weighing
20 kg
range
KERN
99K50
Readability
50 g
Weighing
99 kg
range
2
Basic instructions
2.1
Proper use
The balance you purchased is intended to determine the
weighing value of material to be weighed. It is intended to be
used as a "non-automatic" balance, i.e. the material to be
weighed is manually and carefully suspended. As soon as a
stable weighing value is reached the weighing value can be
read.
2.2
Improper Use
Do not use balance for dynamic weighings. In the event that
small quantities are removed or added to the material to be
weighed, incorrect weighing results can be displayed due to the
"stability compensation" in the balance. (Example: Slowly drain-
ing fluids from a container suspended on the balance.) No
permanent load must remain on the balance. This may dam-
age the measuring system.
Impacts and overloading exceeding the stated maximum load
(max) of the balance, minus a possibly existing tare load, must
be strictly avoided. Balance may be damaged by this (danger
of breaking).
Caution:
Make sure that never persons or objects are under the
load which could be injuried or damaged!
The balance is not suitable for weighing persons!
The balance does not correspond to the law of medical
products (MPG).
Never operate balance in explosive environment. The serial
version is not explosion protected.
The structure of the balance may not be modified. This may
lead to incorrect weighing results, safety-related faults and
destruction of the balance.
The balance may only be used according to the described
conditions.
Other areas of use must be released by KERN in writing.
6
Operating Instructions Hanging scale
20K50
50K20
50K100
50 g
20 g
100 g
20 kg
50 kg
50kg
100K200 200K100 200K500
200 g
100 g
500 g
100 kg
200 kg
200 kg
2.3
Warranty
Warranty claims shall be voided in case
•
Our conditions in the operation manual are ignored
•
The appliance is used outside the described uses
•
The appliance is modified or opened,
mechanical damage and damage caused by media, liquids
•
Natural wear and tear
•
The appliance is improperly set up or incorrectly electri-
cally connected
•
The measuring system is overloaded
2.4
Monitoring of Test Resources
In the framework of quality assurance the measuring-related
properties of the balance and, if applicable, the testing weight,
must be checked regularly. The responsible user must define a
suitable interval as well as type and scope of this test. Informa-
tion is available on KERN's home page (www.kern-sohn.com)
with regard to the monitoring of balance test substances and
the test weights required for this. In KERN's accredited DKD
calibration laboratory test weights and balances may be cali-
brated (return to the national standard) fast and at moderate
cost.
3
Basic Safety Precautions
Do not use the suspended balance for conveying loads
Never exceed the maximum permitted load (!!Danger of
breaking!!).
Always ensure that there are no persons, animals or
objects that might be damaged underneath the load.
Avoid any kind of shock, torsion and oscillating (e.g.
caused by inclined suspending)
No
Do not use
Do not twist
under pressure
3.1
Pay attention to the instructions in the Operation Man-
ual
Carefully read this operation manual before commissioning,
even if you are already familiar with KERN balances.
3.2
Personnel training
The appliance may only be operated and maintained by trained
personnel.
No
OK
Only apply under
tensile force
HCB-BA-e-0732
Related Manuals for KERN 20K10
Summary of Contents for KERN 20K10
- Page 1 KERN balances. The balance may only be used according to the described conditions. Personnel training Other areas of use must be released by KERN in writing. The appliance may only be operated and maintained by trained personnel. HCB-BA-e-0732...
- Page 2 In case of an adjustment error or incorrect adjusting weight the Scope of delivery display will show "E"; repeat adjustment process. • Suspended balance • Batteries KERN 20K10 20K50 50K20 50K100 • Operating Manual Adjustment 10 kg 10 kg...
- Page 3 Service, maintenance ing the Hold-key The appliance may only be opened by trained service techni- Data-Hold function 2 cians who are authorized by KERN. The weighing value will be frozen after press- ing the Hold-key until another key is actuated Disposal...