Quick Links
See also:
Instruction Manual
DVD HOMETHEATER SYSTEM
Firmware Update
Contents
1. Check Product's F/W Version
2. Update by Disc or USB device
1
Related Manuals for Samsung HT-KQ20
Summary of Contents for Samsung HT-KQ20
-
Page 1: Firmware Update
DVD HOMETHEATER SYSTEM Firmware Update Contents 1. Check Product’s F/W Version 2. Update by Disc or USB device... - Page 2 1. Check Product’s FIRMWARE Version - Turn on the product. Make the tray open by pressing ONEN/CLOSE button. - Press MENU button on the remote controller, then press Numeric button 8,9,5. - In some case of 5-Disc supported models, Play an DVD disc first ,before Tray open - Do the same procedure mentioned before : press Menu, 8, 9, 5 buttons on the remote controller...
- Page 3 - Product’s FIRMWARE Version and File name is displayed in screen. ① : It shows Firmware version of product Above screen, The Version is 1.12. ② : It shows Firmware File name of product. Above screen The file name is PDADVIDS.ROM.
-
Page 4: Important Notice
2. UPDATE by Disc or USB Device - In case of Using a disc, Make an update disc under below recommendation. . Disc type : ISO type . Multi-session : No Multi-session . Recording speed : under 8x - You can update new F/W, by playing the update disc - For the USB HOST playback supported model, Copy F/W file to USB device .Format the USB Device .Copy the firmware file to USB Memory device... - Page 5 - Turn on the product, Play an Update disc or a USB Device - Firmware update is carried, repeating ERASE and WRITE after READING - After Update complete, The set goes to turn off and turn on state automatically. ■ - Press (STOP) button on the main unit in “No disc“...
- Page 6 - Pressing the button continuously until INITIAL display in the Display window ■ - In power off condition, Press (STOP) button on the main unit again. - Pressing the button until the Standby LED on the main unit blink. - After initial, you can select an OSD language in the SETUP Menu...