Sony RMT-P1BT - Remote Commander Startup Guide

About the manual for this product

This guide describes the necessary preparations to start using the product, basic operations, etc. For details, refer to the "Help Guide" (web manual).

"Help Guide" (Web manual)
https://rd1.sony.net/help/ilc/1820/h_zz/

• This unit is Remote Commander which is compatible with the Bluetooth function. For the camera models that can connect to the unit, visit the following website. https://www.sony.net/dics/p1bt/
  

Do not ingest battery, chemical burn hazard.

This unit contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

Keep new and used batteries away from children. If the battery cover does not close securely, stop using the product and keep it away from children.

If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Identifying the parts

1. Battery cover

Inserting the battery

Insert the battery so that the + terminal is facing upward. (+ on the battery chamber indicates the direction of the battery.) To close the battery cover, turn the battery cover toward "CLOSE" until it stops.

Pairing the unit with the camera

1. On the camera, select MENU → (network) → [Bluetooth Settings] or [Bluetooth] → [Bluetooth Function] → [On].
2. On the camera, select MENU → (network) → ([Transfer/Remote] → ) [Bluetooth Rmt Ctrl] → [On].
3. On the camera, select MENU → (network) → [Bluetooth Settings] or [Bluetooth] → [Pairing].
4. On the Remote Commander, press and hold the Shutter-release/REC button and the + side of the Focus/Zoom button at the same time for at least 7 seconds.
5. When a confirmation message appears on the camera's screen, select [OK].
   • appears and pairing begins.

Note

• In the following situations, pair the Remote Commander and the camera again.
• If the Remote Commander is not used for a period of time during a Bluetooth connection, (no Bluetooth connection) may appear on the camera's screen.

Confirming the setting on the camera

On the camera, select MENU → (network) → ([Transfer/Remote] →) [Bluetooth Rmt Ctrl] and make sure that [On] is selected.

Shooting

Use the Remote Commander to operate the camera for shooting. For details, also refer to the Help Guide.

1. Toggle the Remote Commander's MOVIE/STILL switch.
2. Press the Shutter-release/REC button.

Specifications

Dimensions (W/H/D) (Approx.): 33 mm × 116.5 mm × 15.1 mm (1 5/16 in. × 4 5/8 in. × 5/8 in.)

Mass (Approx.): 35 g (1.3 oz) (Without the battery)

Included items: Remote Commander (1), Lithium coin cell battery (CR2032) (1), Set of printed documentation

Design and specifications are subject to change without notice.

The Bluetooth^® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Group Corporation is under license.