MoCA LED:MoCA link status
Solid white
MoCA is connected.
Blinking white
MA-25 is transmitting or receiving data via MoCA connection.
ETH LED: Ethernet status
Solid white
MA-25 is connected to Ethernet.
Blinking white
MA-25 is transmitting or receiving data via Ethernet connection.
Security LED: MoCA Security is enabled/ disabled.
Solid white
MoCA security is enabled.
Off
MoCA security is disabled.
MoCA Adapter 1
Connect the MoCA Adapter 1 to your router, Mesh router or modem.
MoCA Adapter 2
Connect the MoCA Adapter 2 to your Mesh node or devices.
NOTE: If you want to add the MA-25 to an existing MoCA 2.5 Network with different security/privacy settings, MPS is required.
To use MPS:
If you are using DOCSIS 3.1 coexisting with the MoCA network, choose Mode 1 to avoid interference; if not, stay on Mode 2.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the MA-25 that isn't answered in the manual? Leave your question here.