RCA RPJ106 - Home Theater Projector With Bluetooth Manual

PLEASE READ BEFORE OPERATING THIS EQUIPMENT

This product is manufactured and sold by Curtis International Ltd.

RCA, the RCA logo, the two dogs (Nipper and Chipper) logo, are registered trademarks or trademarks of RCA Trademark Management and are used under license by Curtis International Ltd. Any other product, service, company, trade or product name and logo referenced herein are neither endorsed nor sponsored by RCA Trademark Management or its affiliates.

Ideal for dark viewing environments for optimal performance.
Please note: Projector brightness is measured in ANSI lumens. Your viewing environment is the deciding factor on how many lumens your projector needs.

Important Safety Instructions

1. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving th cart/ apparatus combination to avoid injury from tip-over.
   

Additional Warnings and Precautions

1. 
   Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
2. 
   Changes or modified to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
3. 
   Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
4. 
   Shock hazard - Do Not Open.
5. 
   To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.

FCC Warning

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

In The Box

Remove & Close The Lens Cover

Placing Your Projector

Your projector can be installed in four different configurations (see picture below):

Front Table

Select this location with the projector placed near the floor in front of the screen. This is the most common way to position the projector for quick setup and portability.

Rear Table

Select this location with the projector placed near the floor behind the screen.
NOTE: That a special rear projection screen is required.

Front Ceiling

Select this location with the projector suspended upside-down from the ceiling in front of the screen.
NOTE: A projector mount is required to install the projector in a ceiling.

Rear Ceiling

Select this location with the projector suspended upside-down from the ceiling behind the screen.
NOTE: A projector mount is required to install the projector in a ceiling.
A special rear projection screen is required.

To Reduce Image Distortion

• The light beam from the projector should be perpendicular to the screen for a rectangular or square image.

Distance Between The Projector And Screen

Measure the distance between the projector and where you want to position the screen. This is the projection distance.

Distance Screen Size 1.16m 37 inch 1.35m 45 inch 1.51m 50 inch 1.81m 60 inch 2.15m 72 inch

Installing your Projector in the Ceiling

When installing the projector in the ceiling, please purchase a projector mount recommended by an installation professional and follow the instructions that come with the mount.

Before installing the projector in the ceiling, please check to make sure the ceiling structure can support the weight of the projector and the mount. If in doubt, please ask the advice from an installation professorial.

NOTE:Projector mount and screw(s) not included

Adjust The Vertical Location

Follow below picture to adjust the vertical location.

Adjust The Focus And Keystone

Follow below picture to adjust the focus and trapezoidal screen.

Adjust the focus by turning the knob while observing the image pixels near the center of the screen. Optimal focus is obtained when the pixels are clearly visible. Depending on the projected screen size, the focus near the screen edges may be less sharp than the screen center.

Keystone image is created when the projector lens is projected from above or below the center of the screen. Keystone correction restores the distorted image to a rectangular or square shape.

FOCUS ADJ. KNOB
Then sharpen the image by rotating focus knob.

Controls Of Remote

Install / Remove Battery Of Remote

Remove the battery compartment cover on the back of your remote by carefully sliding to open. The battery cover can then be lifted away. Fit the correct batteries (not included), referring to the polarity markings. Finally, replace the cover.

NOTES:

Controls Of Projector

1. Buttons
2. Button
3. POWER Button
4. RETURN Button
5. Buttons
6. MENU Button
7. SOURCE Button

Install Power Adapter

Follow below picture to connect power adapter
Connect small end of adapter FIRST. Plug the adapter body to power outlet.

Before connecting to the power supply, ensure that the supply corresponds to the information on the rating label at the back of the apparatus.

Main Button Operation

- Press the button to turn on unit, press again to turn off.

/ SOURCE - Press the button to select input source.

/ MENU - Press the button to enter projector menu. OK OK

- Press the buttons to navigate and select screen item of menu.

/ EXIT - Press the button to return to previous status or exit the menu.

- Press the buttons to fast search forward and rewind on USB / TF.

- Press the buttons to search next or previous file on USB / TF.

VOL+ / VOL - Press the buttons to select the sound level.

- Press the button to play/pause the playback of file on USB / TF card.

FLIP - Press the button to rotate / mirror projector screen

ZOOM - Press the button to select image scale.

- Press to mute the audio. Press again to resume.

Connect HDMI Show The Image On Projector Screen

Refer to the following picture to connect a set top box, a BD/DVD player or a streaming player to the HDMI input.

1. After connection, press the button to turn on unit and power indicator will light GREEN
2. Press the / SOURCE button to select HDMI 1 or HDMI 2 and the video from the connected device will be shown on projector screen.
3. Press the button to turn off unit power.

If there is no sound from the internal speakers when playing media contents from a set top box, BD/DVD or streaming players connecting to the HDMI input, please check the set top box or the player's digital audio settings and make sure it is set to "PCM Stereo" mode.

Connect AV Show The Image On Projector Screen

Follow below picture to connect AV cable and device.

1. After connect, press the button to turn on unit and power indicator will light GREEN
2. Press the / SOURCE button to select AV mode and the video of AV device will show on projector screen
3. Press the button to turn off unit power

Connect VGA Show The Image On Projector Screen

Follow below picture to connect VGA cable and device.

1. Press the button to turn off power of your projector before connection.
2. After connect, press the button to turn on unit and power indicator will light GREEN
3. Press the / SOURCE button to select VGA mode and the video of VGA device will show on projector screen
4. Press the button to turn off unit power.

Please refer to the following table to adjust the output signal from computer

Type	Resolution		Frequency	Field Frequency
PC	VGA	640x480	31.5	60
			34.7	70
			37.9	72
			37.5	75
	SVGA	800x600	31.4	50
			35.1	56
			37.9	60
			46.6	70
			48.1	72
			46.9	75
	XGA	1024x768	40.3	50
			48.4	60
			56.5	70

NOTE: In order to get the sound from the unit, please connect AV IN cable when you connect VGA input.

Connect Audio Output ( Aux Out / Line Out / Earphones)

Follow below picture to connect audio cable and device.

1. Press the button to turn off power of your projector before connection.

Important Note:
If there is no sound from the stereo audio output when playing media contents from a set top box, BD/DVD or streaming players connecting to the HDMI input, please check the set top box or the player's digital audio settings and make sure it is set to "PCM Stereo" mode.

Install USB Device And Micro Sd Card "TF"

Follow below picture to install USB and TF card

Turn off the unit before install USB / TF card.

Using TF Card And USB Playback (Media Player )

Install USB / TF device:

1. After connect, press the button to turn on unit and the power indicator light GREEN.
2. Press the / SOURCE button to enter and use buttons to search the USB or TF.
3. After selection, use buttons to search the PHOTO / MUSIC / MOVIE / TEXT icon and press the button to enter.
4. Use the button to select C and press button to enter.
5. Use buttons to search the correct file and press the button to preview playback file and press button of remote to start playback.
6. Press button to fast search forward and wind.
7. Press button to search next or previous file.
8. During playback, press the button to pause and press again to resume.

NOTE
Remove USB / TF device, press the button twice to turn off power FIRST.

Sub-Menu on Photo screen
When photo playback, press the button and more function screen show on lower (figure 1). Use the button to select icon and press button to play special function.
Sub-Menu on Music screen
When music playback, press the button and more function screen show on lower (figure 2). Use the button to select icon and press button to play special function.
Sub-Menu on Movie screen
When movie playback, press the button and more function screen show on lower (figure 3). Use the button to select icon and press button to play special function.
Sub-Menu on Text screen
When text playback, press the button and more function screen show on lower (figure 4). Use the button to select icon and press button to play special function.

Using Bluetooth Playback

Pairing is the term used when two Bluetooth devices are connected wirelessly for the first time. This allows the devices to see each other and sets up a one to one communication channel between both devices.

Bluetooth Connection

1. Press the button to turn on unit.
2. Press the / MENU button to enter the menu screen.
3. Use the button to select right side menu.
4. Use the button to select Bluetooth speaker column.
5. Press the button to select "Bluetooth Speaker On" OK

Disconnect the Bluetooth

1. Press the / MENU button to enter the menu screen.
2. Use the button to select above menu.
3. Use the button to select Bluetooth speaker column.
4. Press the button to select "Bluetooth Speaker Off" that the OK Bluetooth disconnect.

Using Projector Menu 1.0

Press / MENU button to enter projector menu.

This Picture menu showed on right upper of view screen.

• Use to select different picture effect to Standard /
• Soft / User / Vidid. Use or to select Contrast / Brightness / Color / Sharpness digit If chose User item. Follow below figure.
• Use buttons to select different color temperature to Cool / Medium / Warm / User. Use or to select Red / Green / Blue digit If chose User item. Follow below figure.
• Use buttons to select screen ratio AUTO / 4:3 / 16:9. Follow below figure.
• Use buttons to select Off / Low / Middle / High / Default.
• Use buttons to select 75% - 100%

Picture Mode
Customer define		Parameter
Contrast		0-100
Brightness		0-100
Color		0-100
Sharpness		0-100
Color Temperature
Customer define		Parameter
RED		0-100
GREEN		0-100
BLUE		0-100
Aspect Ratio
4:3	The signal in a 4:3 aspect ratio projection image
16:9	The signal in a 16:9 aspect ratio projection image

Using Projector Menu 2.0

Press / MENU button to enter projector menu, press buttons to select SOUND menu.

This SOUND menu showed on right upper of view screen.

• Use to select different sound effect Standard / Music / Movie / Sports / User.
• Use or to select Treble and Bass digit if chose User item. Follow below figure to set digit.
• Use buttons to select Balance level to -50 to +50.

Sound Mode - User	Parameter
Treble	0-100
Bass	0-100

Using Projector Menu 3.0

Press / MENU button to enter projector menu, press buttons to select OPTION menu.

This OPTION menu showed on right upper of view screen.

• Use button to select different language. Follow below figure.
• Use buttons to select Y or N. If choose "Y" that your unit will go to factory default setting.

Czech	English	French	Hungarian	Polish	Romanian	Slovak
Danish	Spanish	Croatian	Dutch	Portuguese	Serbian	Simplified Chinese
German	Greek	Italian	Norwegian	Romanian	Finnish

Ideal for dark viewing environments for optimal performance.
Please note: Projector brightness is measured in ANSI lumens.
Your viewing environment is the deciding factor on how many lumens your projector needs.

Specifications

Bluetooth Version	4.2
Light Source Type	LED
White light output	ANSI 33 lumens
White brightness output	ANSI 33.1 lumens
Color light output	ANSI 27 lumens
Display Native Resolution	800 x 480 RGB
HDMI Input Supported Video Resolution.	1080p, 1080i, 720p, 576i, 480p, and 480i
Power Consumption	Operating 30W; Standby 1.1W
Power Input Connect Included Adapter	DC 12V, 2.5A
Included Adapter	Input AC100-240V,50/60Hz
Connect DC input of unit	Output DC12V, 2.5A
Display Color	16.7M
Projection Size	37-100 inch
Input Port	AV/ VGA / HDMI X 2
USB Port	Support USB device up to 32GB Support format Mpeg1, Mpeg2, Mpeg4, mp3, Jpeg
TF Card	Support TF card up to 32GB Support format Mpeg1, Mpeg2, Mpeg4, mp3, Jpeg
Net Weight (unit)	0.95 KG
Product Dimensions	7.9" L x 6.1" D x 3.3" H

Specifications are typical, individual units might vary. They are subject to continuous improvement without notice and without incurring any obligation.

For service assistance and product information, please call: 1-800-968-9853.
Pour obtenir assistance et information appelez: 1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3
www.curtisint.com

To make a warranty claim, do not return this product to the store. Please email [email protected] or call 1-800-968-9853.

90 day Year Warranty

This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us.

This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz).

We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.