Canon X Mark I Mouse Manual

SYSTEM REQUIREMENTS

Hardware: Bluetooth-enabled (V2.0) computer (with either built-in Bluetooth connection device or external Bluetooth dongle)
Windows based PC x86 / x64 or above, Intel-based Mac system
Operating System: Windows^® XP (sp 2.0 or above) or Windows Vista^® or Windows^® 7; Mac OS^® X 10.4 ~ 10.6

IMPORTANT PRECAUTIONS BEFORE USE

MALFUNCTON AND HADLING WITH CARE

BATTERY CAUTION!

LASER SPECIFICATIONS

DEVICE

This device complies with International Standard IEC 60825-1: 2007 for a Class 1 laser product.

SPECIFICATIONS

LASER PRODUCT CAUTION!

INSTALLING THE BATTERIES

Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instruction.

BLUETOOTH CONNECTION

Selecting Your Operating System

The X Mark I mouse calculator is designed to work with both Windows and Macintosh OS's. Please select your OS switch the located at the bottom of the X Mark I mouse calculator by sliding the Bluetooth OS switch to PC or Mac mode.

During the process of connecting your mouse calculator to your Bluetooth computer, be sure the Bluetooth OS switch location is correct. If the Bluetooth OS switch set to an incorrect OS, there may be abnormal situation.

Before connecting the mouse calculator with the Bluetooth device in your computer, be sure the Bluetooth feature in your computer is enable and ready.

Frequency: 2.4 GHz frequency range

Connection Range: The operation range is up to 10 meters (32.8 feet)

Note: Connect range is affected by many factors, such as nearby metallic objects and relative positioning of the mouse and receiver.

TROUBLESHOOTING

The mouse calculator is not connected / not function properly.

1. Change new batteries if icon appears.
2. No display after Bluetooth ON, press key and check if icon appears.

TIPS

INSTRUCTION OF MOUSE

CALCULATOR MODE AND KEYPAD MODE

When Bluetooth connected, this mouse calculator has 2 modes -- Calculator Mode (CAL) and Keypad Mode (KP).

Switch between Calculator and Keypad Mode

• To switch between calculator and keypad mode, simply press the key. The mode status will be shown on the display.
  
  (Calculator Mode - "C")
  
  (Keypad Mode - "K")

Calculator Mode (when Bluetooth connected)

• You can send calculation results (or display contents) to a computer by pressing key.
  • The key is disable when the calculator is not Bluetooth connected with a computer.

Keypad Mode (when Bluetooth connected)

• You can input the numeric number (0 ~ 9), +, , x, ÷, , , , to a computer directly.

Power-Saving

• In the "Idle Mode" and still (none of operation) more than 7 minutes, the mouse calculator will automatically power off. Click the mouse button or press key (Calculator mode only) to re-activate the mouse calculator and the Bluetooth connection.
  Note: You don't need to re-connect Bluetooth after re-activate by mouse click.

Power-low Indicator

• When display is dim or the "" icon appears. Please replace the batteries at your earliest convenience to avoid power running out unexpectedly.
  
  (Calculator Mode - "C")
  
  (Keypad Mode - "K")

Keypad Lock (when Bluetooth is connected)

• Press key and hold for 3 seconds; the keypad will be locked and display.
  
  You still can use the mouse operation.
• To unlock the keypad, press key and hold for 3 seconds.

Key Index

:
Clear all display
Power on the calculator
Keypad lock / unlock

:
Clear input that have just been entered (Calculator Mode only)
Clear all input (Calculator Mode only)
Escape the input (Keypad Mode only)

:
Switch between Calculator or Keypad Mode

:
Backspace in keypad mode; shift each digit of the displayed numerical value and clears the last significant digit.

:
Send calculation results or display contents to computer (in Calculator Mode and Bluetooth connected)

:
Used to perform percentage add-on and discount calculation. (Calculator Mode only)

:
Execute calculation (Calculator Mode only)
Enter Key -- Confirm the input (Keypad Mode only)

:
The designated position is F (floating decimal point) 0, 2 or 3 digit(s) after decimal point.
Used to set the number of digits after the decimal point of the calculation.
Press and then keep pressing key, the display will change in the sequence of F > 0 > 2 > 3 > F. (Calculator Mode only)

• Electromagnetic interference or electrostatic discharge may cause the display to malfunction. Should this occur, use the tip of a ball point pen (or similar sharp object) to press the [CAL RESET] button on the back of the mouse calculator.
  

SPECIFICATION

Power Source: AA-size Alkaline batteries x 2

Wireless connection: Bluetooth 2.0

Usable temperature: 0ºC to 40ºC (30ºF to 104ºF)

Dimension: 120mm (L) x 60mm (W) x 30mm (H)

Weight: 88g (without battery) / 136g (with battery)

(Specifications are subject to change without notice)

Initial Setup

Macintosh

1. Go to the Bluetooth icon and click to set up; select "Turn Bluetooth On" to active the Bluetooth.
   
   
2. Select "Set up Bluetooth Device..." in the scrolled list.
   
   
3. Bluetooth Setup Assistant; click "Continue" to start and follow the screen.
   
   
4. Select "Mouse" and click "Continue".
   
5. Slide to Bluetooth Mac ON (the switch located on the back of the mouse calculator), the "" icon appear on the display and flash .
   Press "Pair button" to connect the Bluetooth.
   
   
6. Select "Canon X Mark I Mouse" and click "Continue".
   
   
7. Your computer is now setup to use your Mouse calculator.
   
   
8. To Customize your X Mark I mouse - You can set up or assign an action to each button, left or right button as the primary button and adjust the speed for tracking, scrolling and clicking.
   Macintosh: Apple > System Preferences > Keyboard & Mouse > Mouse

Windows^® Vista and Windows^® 7

1. Click the Bluetooth icon located on your desktop or in the system Toolbar, select "Add Wireless Device" to active the Bluetooth.
   
   (Windows Vista^®)
   
   (Windows^® 7)
2. Slide to Bluetooth PC ON (the switch located on the back of the mouse calculator), the "" icon appear on the calculator display and flash .
   Press "Pair button" to connect the Bluetooth.
   
3. The "Canon X MARK I Mouse" will be discovered and listed on the screen. Click the name of the device.
   
   (Windows Vista^®)
   
   (Windows^® 7)
4. Click "Close" to complete the connection.
   
   (Windows Vista^®)
   
   (Windows^® 7)
5. Your computer is now setup to use this Canon X Mark I Mouse calculator. The "Bluetooth" icon will appear on the display.
   
6. To Customize your X Mark I mouse - You can set up or assign an action to each button, left or right button as the primary button and adjust the speed for tracking, scrolling and clicking.
   Windows: Start > Control Panel > Mouse

European Union (and EEA) only. These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Directive (2002/96/EC), the Battery Directive (2006/66/EC) and/or your national laws implementing those Directives. If a chemical symbol is printed beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a concentration above an applicable threshold specified in the Battery Directive. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE) and batteries and accumulators. Improper handling of this type of waste could have a possible impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about the recycling of this product, please contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway, Iceland and Liechtenstein)