Bosch FLEXIDOME panoramic 5100i IR Installation Manual
Hide thumbs
Also See for FLEXIDOME panoramic 5100i IR:
- Installation manual (40 pages) ,
- User manual (54 pages) ,
- User manual (56 pages)
Related Manuals for Bosch FLEXIDOME panoramic 5100i IR
Summary of Contents for Bosch FLEXIDOME panoramic 5100i IR
- Page 1 FLEXIDOME panoramic 5100i IR NDS‑5703‑F360LE | NDS‑5703‑F360LE‑GOV | NDS‑5704‑F360LE | | NDS‑5704‑F360LE‑GOV Installation manual...
-
Page 3: Table Of Contents
FLEXIDOME panoramic 5100i IR Table of contents | en Table of contents Safety Safety message explanation Safety precautions Important safety instructions Notices Short information System overview Product description Intended use Using the camera Operation with external systems Planning information Unpacking... -
Page 4: Safety
| Safety FLEXIDOME panoramic 5100i IR Safety Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings before operating the device. Safety message explanation In this manual, the following symbols and notations are used to draw attention to special... -
Page 5: Notices
24 VAC, 60 Hz, 0.70 A minimum – FLEXIDOME panoramic 5100i IR: when your product is powered by a power adapter, the adapter shall be powered by a Listed Power Adapter, or DC power source, marked L.P.S. - Page 6 | Safety FLEXIDOME panoramic 5100i IR IC statement (Canada) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 7: Short Information
Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between this manual and the product described. Copyright This manual is the intellectual property of Bosch Security Systems and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. -
Page 8: System Overview
Integration with the many Bosch recording solutions is seamless. Operation with external systems The web browser is the most direct way of using the camera, however, the Bosch download store provides several other free applications (listed below) for viewing and controlling the camera. - Page 9 Bosch Video Client The Bosch Video Client is a free Windows application to view, operate, control, and administer surveillance cameras and installations at remote locations. It offers a user-friendly interface for easy live viewing of multiple cameras, playback, forensic search and export.
-
Page 10: Planning Information
This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all parts are included. If any items are missing, notify your Bosch Security Systems sales or customer service representative. -
Page 11: Preparation
FLEXIDOME panoramic 5100i IR Planning information | en Quantity Component Safety information Identification labels Preparation Before installation, prepare and plan the installation process and materials needed. Pre-requisites – Remove the components from the box. Make sure that all parts are included and are not damaged. -
Page 12: Installation
Remove the camera base from the box. Local storage Notice! Bosch recommends the use of industrial micro SD cards with health monitoring. To install the micro SD card: Install a micro SD card in the micro SD slot using the TR15 tool. - Page 13 FLEXIDOME panoramic 5100i IR Installation | en The mounting plate is used to fix the camera to a flat surface or together with a mounting accessory. It offers different holes and slots for a variety of mounting options. Mounting holes for 4 inch or 4S Mounting holes for standard wall or electrical box installation.
- Page 14 | Installation FLEXIDOME panoramic 5100i IR Mark the positions of the screw holes on the surface. Note: For standard installation, use the mounting holes marked with a B on the mounting plate. For a different installation, for example for an installation on an electrical box, use different mounting holes.
- Page 15 FLEXIDOME panoramic 5100i IR Installation | en Bosch Security Systems B.V. 2022-10 | V02 | F.01U.385.630 Installation manual...
-
Page 16: Installing The Camera Base
| Installation FLEXIDOME panoramic 5100i IR In order to ensure proper wall installation with the Bosch logo showing up straight on top, the mounting plate needs to be install as shown above. 5.1.3 Installing the camera base Put the RJ-45 punch-through aid on the network cable. - Page 17 FLEXIDOME panoramic 5100i IR Installation | en Connect the network cable to the network connector in the camera. Notice! To ensure proper watertight installation, the cable entry marked with PoE needs to be used for RJ45/PoE cable. If used, connect the audio and alarm wires to the 8-pin Audio and I/O connector. The camera Audio input only accepts line level input.
- Page 18 | Installation FLEXIDOME panoramic 5100i IR Notice! Remove the side entry door, if a cable comes from outside the camera. The side entry door can stay in place, if a cable comes from the back. 11. Position the camera base on the mounting plate, so that the screw holes of camera base and mounting plate match.
-
Page 19: Installing The Camera Dome Cover
FLEXIDOME panoramic 5100i IR Installation | en Installing the camera dome cover On the wall mount scenario, confirm that the lens module marking “TOP” is facing up. If not, turn the lens module in the correct orientation to ensure the images shows up correctly in the system or browser. -
Page 20: Removing The Camera
| Installation FLEXIDOME panoramic 5100i IR Remove the protective foil. Removing the camera Follow the below steps in case the camera needs to be removed or opened: Untighten the three captive screws in the camera. Disconnect the Ethernet cable. -
Page 21: Optional Mounting Accessories
FLEXIDOME panoramic 5100i IR Installation | en Optional mounting accessories NDA-5080-PIP Pendant interface plate, 148mm NDA-5080-PIPW Pendant interface plate, 148mm NDA-U-WMT Pendant wall mount NDA-U-WMP Wall mount plate NDA-U-PMT Pendant pipe mount, 12" (31cm) NDA-U-PMTE Pendant pipe extension, 20" (50cm) NDA-U-PMTS Pendant pipe mount, 4"... - Page 22 | Installation FLEXIDOME panoramic 5100i IR NDA-U-PSMB Pendant wall/ceiling mount NDA-U-PMAS Pole mount adapter small NDA-U-PMAL Pole mount adapter large NDA-5080-PC Paintable cover, F360E, 4pcs NDA-5080-TM Tilt mount 20-deg, 148mm NDA-U-CBB Conduit back box, 148mm NDA-U-CMT Corner mount adapter 2022-10 | V02 | F.01U.385.630...
- Page 23 FLEXIDOME panoramic 5100i IR Installation | en NDA-U-PMTG Pendant pipe mount, gang NDA-U-WMTG Pendant wall mount, gang NPD-3001-WAP Portable installation tool NPD-5001-POE Midspan, 15W, single port, AC in NPD-5004-POE Midspan, 4 port x 15W, AC in VG4-SFPSCKT Ethernet to SFP interface kit...
- Page 24 | Installation FLEXIDOME panoramic 5100i IR SFP-3 Fiber module, single-mode, 1310nm, 2LC SFP-25 Fiber module, 1310/1550nm, SFP-26 Fiber module, 1550/1310nm, 2022-10 | V02 | F.01U.385.630 Bosch Security Systems B.V. Installation manual...
-
Page 25: Configuration
FLEXIDOME panoramic 5100i IR Configuration | en Configuration Browser connection A computer with a web browser (Google Chrome, Microsoft Edge, or Mozilla Firefox) is used to receive live images, control the unit, and replay stored sequences. The unit is configured over the network using the browser. -
Page 26: Troubleshooting
| Troubleshooting FLEXIDOME panoramic 5100i IR Troubleshooting Resolving problems The following table is intended to help identify the causes of malfunctions and correct them where possible. Malfunction Possible causes Solution Unit does not operate. Power failure. Check power supply. Check if PoE, 12 V or 24 V auxiliary input... -
Page 27: Customer Service
FLEXIDOME panoramic 5100i IR Troubleshooting | en – The device is not properly connected to the network. Check the cable connections in this case. – The device is not correctly integrated into the network. Check the IP address, subnet mask, and gateway address. -
Page 28: Maintenance
| Maintenance FLEXIDOME panoramic 5100i IR Maintenance Cleaning Lens cleaning It is important to keep the lens clean to ensure optimum performance. Dust, grease, or fingerprints should be removed from the lens surface. When cleaning the lens, take extra care not to damage the special coating used to reduce light reflections. -
Page 29: Decommissioning
FLEXIDOME panoramic 5100i IR Decommissioning | en Decommissioning Transfer The device should only be passed on together with this Installation manual. Disposal Old electrical and electronic equipment This product and/or battery must be disposed of separately from household waste. Dispose such equipment according to local laws and regulations, to allow their reuse and/or recycling. -
Page 30: Technical Data
| Technical data FLEXIDOME panoramic 5100i IR Technical data 10.1 Dimensions 55.1 (2.17) Dimensions in mm (inch) 10.2 Specifications Power Input voltage PoE IEEE 802.3af / 802.3at Type 1, Class 3 24 VAC ±10% 12 VDC ±10% PoE and auxiliary power can be connected simultaneously... - Page 31 FLEXIDOME panoramic 5100i IR Technical data | en Sensor Total sensor pixels 6 MP Type (6 MP) 1/1.8‑inch CMOS Used pixels (6 MP) 2112 x 2112 (4.5 MP) Total sensor pixels 12 MP Type (12 MP) 1/2.3 inch CMOS Used pixels (12 MP) 3008 x 3008 (9 MP) Video performance - Sensitivity Measured according to IEC 62676 Part 5 (1/25, F2.0)
- Page 32 | Technical data FLEXIDOME panoramic 5100i IR Video resolution (H x V) Video 1 channel Full image circle 6 MP: 2112 x 2112 (4.5 MP) 12 MP: 3008 x 3008 (9 MP) Video 2 channel Various dewarped modes (Full Resolution depends on panoramic, double panoramic, selected dewarped mode quad, corridor, E-PTZ)
- Page 33 FLEXIDOME panoramic 5100i IR Technical data | en Video content analysis Audio AI Gunshot detection, glass-break detection, loud noises detection (available with a future firmware version) Night vision Distance 20 m (66 ft) 360⁰ LED high efficiency array, 850 nm IR intensity 5 controllable zones...
- Page 34 | Technical data FLEXIDOME panoramic 5100i IR Input/output Fiber optics (sold separately) The Fiber Optic Ethernet Media Converter kit (VG4- SFPSCKT) installed inside a Surveillance Cabinet (NDA-U- PA0, NDA-U-PA1 or NDA-U-PA2) provides the fiber optic interface to the mounted camera.
- Page 35 FLEXIDOME panoramic 5100i IR Technical data | en Mechanical Gyrosensor Dome bubble Polycarbonate, clear with UV blocking anti-scratch coating Housing Aluminum with dehumidifying membrane and waterproof connection area Mounting Mounting plate included for surface mount, 4-inch square junction box, single and double gang box...
- Page 36 | Technical data FLEXIDOME panoramic 5100i IR 2022-10 | V02 | F.01U.385.630 Bosch Security Systems B.V. Installation manual...
- Page 37 FLEXIDOME panoramic 5100i IR Technical data | Bosch Security Systems B.V. 2022-10 | V02 | F.01U.385.630 Installation manual...
- Page 38 | Technical data FLEXIDOME panoramic 5100i IR 2022-10 | V02 | F.01U.385.630 Bosch Security Systems B.V. Installation manual...
- Page 40 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2022 Building solutions for a better life. 202210281454...