Page 1
Read before use This document is intended for the various projection lenses that can be attached to and used in conjunction with Panasonic projectors. For Model No. and model names, refer to the product list ( x page 4). Thank you for purchasing this Panasonic product.
Read this first! Always follow these precautions WARNING: Do not look at or place your skin into the light emitted from the lens while the projector is being used. Doing so can cause burns or loss of sight. z Strong light is emitted from the projector’s lens. Do not look at or place your hands directly into this light.
The product names and model numbers of the projection lenses covered by this manual are as follows. Product name Model number Description Fixed-focus lens ET-D3LEU100C Projection lens equipped with an EEPROM Zoom lens ET-D3LEW200C Projection lens equipped with an EEPROM and stepping motor.
Preparation Before replacing the projection lens Return the projection lens to the home position before replacing or removing it. For details on how to return the lens to the home position, refer to the operating instructions of the projector. Attention z Make sure that the projector power supply is switched off before attaching or detaching the projection lens.
This shift in balance tends to increase proportionally with smaller throw ratios. The ET-D3LEU100C / ET-D3LEW200C is equipped with a peripheral focus adjustment function to correct the shift in focal balance between the center and peripheral areas of the screen.
LENS INFORMATION SETTING LENS MEMORY z The [LENS CALIBRATION] screen LENS HOME POSITION appears. ACTIVE FOCUS OPTIMIZER z When the ET-D3LEU100C is LENS CALIBRATION attached, a confirmation screen MENU SELECT appears when the < 执行 > button is SUB MENU 执行...
Page 8
If lens calibration is not performed, the available zoom range of the ET-D3LEW200C will become narrowed. z If ET-D3LEU100C is used on the PT-SRQ32KC / PT-SRZ31KC / PT-SRS30KC, part of the image will be obscured when in the home position. Adjust the lens shift within the lens shift range as described on page 12.
Page 9
Note z If ET-D3LEU100C is used on the PT-SDZ21K2C / PT-SDZ18K2C, part of the image will be obscured when in the home position. Adjust the lens shift within the lens shift range as described on page 12.
Moving the lens outside of the adjustment ranges may alter the focus. This occurs due to limitations in lens movement that are intended to protect the optical components. The following illustrations depict lens shift ranges for floor installations of the projector. z ET-D3LEU100C Projected image width H A[H]...
Page 13
Lens shift ranges (continued) z ET-D3LEW200C Projected image width H A[H] Projector model y[H] PT-SRZ31KC 0.15 0.48 0.12 0.05 0.35 PT-SRQ32KC 0.19 0.56 0.24 0.39 PT-SRS30KC 0.18 0.12 0.14 0.18 Projected image height V Standard projection position Origin position of Obscured part the lens mounter of image...
Specifications Check the specifications of each projection lens, and use the appropriate lens for your intended use. Model No. ET-D3LEU100C ET-D3LEW200C F value Focal Length (f) 8.0 mm (5/16") 13.8 mm (17/32") - 18.1 mm (23/32") Supported screen size 200" to 600"...
Page 15
Dimensions (continued) Model number Dimensions ET-D3LEW200C 398.5 (15-11/16") 495.0 (19-1/2") ENGLISH-15...
附表 / Appendix ■ 投影画面尺寸和投影距离 ■ Projected image size and Projection distance z ET-D3LEU100C (单位 / Unit : m) 当屏幕宽高比为 16:10 时 PT-SRQ22KC / PT-SRQ32KC / PT-SRZ21KC / PT-SRZ31KC / When the screen aspect ratio is 16:10 PT-SRQ13KC PT-SRZ12KC / PT-SDZ21K2C / 投射率...
Page 18
附表 / Appendix ( 续 / continued) (单位 / Unit : m) 当屏幕宽高比为 4:3 时 PT-SRQ22KC / PT-SRQ32KC / PT-SRZ21KC / PT-SRZ31KC / When the screen aspect ratio is 4:3 PT-SRQ13KC PT-SRZ12KC / PT-SDZ21K2C / 投射率 / Throw ratio : [0.479:1] PT-SDZ985C / PT-SDZ981C 投射率...
Page 19
附表 / Appendix ( 续 / continued) z ET-D3LEW200C (单位 / Unit : m) 当屏幕宽高比为 16:10 时 PT-SRQ22KC / PT-SRQ32KC PT-SRZ21KC / PT-SRZ31KC When the screen aspect ratio is 16:10 投射率 / Throw ratio : [0.693 - 0.913:1] 投射率 / Throw ratio : [0.645 - 0.850:1] 5.08 (200") 2.692 4.308...
Page 20
附表 / Appendix ( 续 / continued) 提示 z 所列出的投影距离可能有 ±5 % 的误差。 此外, 当使用 [KEYSTONE] 时, 距离被校正为小于指定的屏幕尺寸。 z 投射率基于投影期间使用的投影画面尺寸为 5.08 m (200") 时的值。 Note z A ±5 % error in listed projection distances may occur. In addition, when [KEYSTONE] is used, distance is corrected to become smaller than the specified screen size. z The throw ratio is based on the value during projection with the projected image size of 5.08 m (200").
Page 21
附表 / Appendix ( 续 / continued) z 投影距离计算方法 z Projection distance formulas 下表中的尺寸可能略有误差。 The dimensions of the following table contain a slight error. z ET-D3LEU100C (单位 / Unit : m) 当屏幕宽高比为 16:10 时 PT-SRQ22KC / =0.3497×SD-0.0664 When the screen aspect ratio is 16:10...
Page 22
附表 / Appendix ( 续 / continued) z ET-D3LEW200C (单位 / Unit : m) 当屏幕宽高比为 16:10 时 PT-SRQ22KC / =0.6070×SD-0.1001 =0.7956×SD-0.1076 When the screen aspect ratio is 16:10 PT-SRQ32KC 当屏幕宽高比为 16:9 时 =0.6239×SD-0.1001 =0.8177×SD-0.1076 When the screen aspect ratio is 16:9 当屏幕宽高比为...