If your boat's ignition has no ACC position, some settings are not saved to the memory. To save, detach the front panel or wait for the unit to shut off completely for 10 seconds after turning it off by pressing and holding SRC/OFF (when [ON] is selected in [PW SAVE]), then turn the ignition off.
This guide is intended to guide you through the basic functions of this unit. For details, please refer to the Operation manual stored on the website. https://www.pioneer-car.eu/eur/
To cancel the demonstration display (DEMO OFF), refer to "Canceling the demonstration display (DEMO OFF)".
To ensure proper use, please read through this guide before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this guide. Please keep the guide in a safe and accessible place for future reference.
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.
If you experience problems
Should this unit fail to work properly, please contact your dealer or nearest authorized PIONEER Service Station.
In the following, "NW" represents network mode and "STD" represents standard mode. According to the connections you have established, change the speaker mode to standard mode (STD) or network mode (NW).
Perform these connections when not connecting a rear speaker or middle range speaker lead to a subwoofer.
Perform these connections when using a subwoofer without the optional amplifier.
In the case of above, two 4 Ω subwoofers wired in parallel will represent a 2 Ω load.
Perform these connections when using the optional amplifier.
Check to make sure that the included bracket matches your particular model of boat and then attach it to the unit as shown below.
The microphone should be placed directly in front of the driver at a suitable distance to pick up their voice clearly.
MVH-MS510BT
You can adjust various settings in the main menu.
Purpose | Operation |
Turn on the power | Press SRC/OFF to turn on the power. Press and hold SRC/OFF to turn off the power. |
Adjust the volume | Turn the M.C. dial. |
Select a source | Press SRC/OFF repeatedly. |
Change the display information | Press DISP repeatedly. |
Return to the previous display/list | Press BAND/. |
Return to the normal display from the menu | Press and hold BAND/. |
Change the display brightness | Press and hold BAND/. |
When you turn the ignition switch to ON after installation, the setup menu appears in the display.
Do not use the unit in standard mode when a speaker system for network mode is connected to the unit. Do not use the unit in network mode when a speaker system for standard mode is connected to the unit. This may cause damage to the speakers.
Menu Item | Description |
LANGUAGE [ENG](English), | Select the language to display the text information from a compressed audio file. |
CLOCK SET | Set the clock.
|
FM STEP [100], [50] | Select the FM tuning step from 100 kHz or 50 kHz. |
SPEAKER MODE [STANDARD], | Switch between two operation modes: the 2-way network mode (NETWORK) and the standard mode (STANDARD) according to the connections you have established. After selecting the appropriate mode, turn the M.C. dial to select [YES], then press to confirm. |
(iPhone source is not available when [USB MTP] is set to [ON] in the SYSTEM settings.)
MTP connection
A device installed with Android OS 4.0 or most of later versions can be connected to the unit via MTP, using the cable supplied with the Android device. However, depending on the connected device, OS version or the numbers of the files in the device, audio files/songs may not be able to be played back via MTP.
NOTE
If you use an MTP connection, [USB MTP] needs to be set to [ON] in the SYSTEM settings.
Up to two Bluetooth telephones can be connected simultaneously.
Purpose | Operation |
Answer an incoming call | Press any button when a call is received. |
End a call | Press . |
Reject an incoming call | Press and hold when a call is received. |
To exit the voice recognition mode, press BAND/.
Pioneer Smart Sync is the application that intelligently brings your favorite marine application, messages, and music together in the boat.
Do not attempt to operate the application while driving. Make sure to stop your boat in a safe location before attempting to use the controls on the application.
NOTE
Regardless of whether the [AUTO APP CONN] setting is set to [ON] or [OFF], you can also perform the following to start Pioneer Smart Sync.
(Not available when [USB MTP] is set to [ON] in the SYSTEM settings.)
Update the firmware of the Spotify application to the latest version before use.
Before you start, connect this unit with the mobile device via USB (iPhone only) or Bluetooth.
Manufacturer:
Pioneer Corporation
28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021, Japan
EU Representative's & Importer:
Pioneer Europe NV
Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
http://www.pioneer-car.eu
[*] MVH-MS510BT
Hereby, Pioneer declares that the radio equipment type [*] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: http://www.pioneer-car.eu/compliance
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.