Panasonic RZ-B210W Manual

Accessories

Please check and identify the supplied accessories.

1x USB-C Charging Cable
1x Earpieces set (2 each of sizes S,M,L) (M size fitted to the earphones)

Safety precautions

Unit

To reduce the risk of fire, electric shock or product damage, Do not expose this unit to rain, moisture, dripping or splashing. Do not place objects filled with liquids, such as vases, on this unit. Use the recommended accessories. Do not remove covers. Do not repair this unit by yourself. Refer servicing to qualified service personnel. Avoid the use in the following conditions

To reduce the risk of fire, electric shock or product damage,

Batteries

Earphones/Earpieces

Allergies

Precautions for listening with the Earphones

This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

Use only the supplied USB charging cord when connecting to a computer.

The symbols on this product (including the accessories) represent the following: DC

Troubleshooting

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated do not solve the problem, consult your dealer for instructions.

Does not connect with the Bluetooth^® device.

The left and right batteries deplete at different rates.

Cannot charge the unit.

• Have the earphones been put into the charging cradle correctly? (→ )
• Is the USB charging cord connected firmly to the USB terminal of the computer? (→ )

Cannot operate the earphones.

• Try turning the power off and on. (→ )

The earphones do not turn on.

Charger LED at battery low

Charging stop by temperature error

How to fit the earphones

1. Check the orientation (up, down) and L (left) and R (right) of the earphones.
2. Fit firmly by turning the earphones a small amount at a time.

To remove/attach the earpieces

If the earphones fall out easily, replace with earpieces (supplied) of a different size.

Remove the earpieces

Attach the earpieces

• Make sure the earpieces are fitted firmly to the earphones and confirm that they are not at an angle.
  

Part names

Main unit (earphones)
(Earphones hereafter in the instructions)

Charging

The chargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit.

1. Use the USB charging cord (supplied) to connect the charging cradle to a computer
2. Put the earphones into the charging cradle.
3. Confirm that the earphone LEDs (white) have illuminated (charging starts).

Turning the earphones on and off

To Turn the earphones on

Open the charger cradle lid.

• The earphones turn on. A beep will sound and the earphone LEDs lit white* and blue alternately.
  * The batteries are charging when they lit in white.

To turn the earphones off

Put the earphones into the charging cradle and close lid.

To manual power on/off

Auto power off

Connecting to a Bluetooth^® device

Connecting by pairing (registering) your earphones with a Bluetooth^® device

1. Take both earphones (L and R) out of the charging cradle.
   • When pairing with a device for the first time:
     This unit will start to search for a Bluetooth^® device to connect to, and the earphone LEDs will light alternately in blue and white.
2. Turn on the Bluetooth^® device and enable the Bluetooth^® function.
3. From the Bluetooth^® menu of the Bluetooth^® device, select device name "RZ-B210W"
   • When the Earphones LEDs blink dim (blue)* at approximately 10 seconds intervals, pairing has been completed and connection has been established.
     * The batteries are low when they are blinking white every 3 seconds.
4. Confirm that the earphones and the Bluetooth^® device are connected.

Connecting with a paired Bluetooth^® device

1. Take the earphones out of the charging cradle. (→ )
2. Do Steps 2 to 4 of "Connecting by pairing (registering) your earphones with a Bluetooth® device".

Using the earphones

Listening to music

1. Connect the Bluetooth device and the earphones. (→ )
2. Select the music or video on the Bluetooth^® device and start playback.

List of operations available with the touch sensors

Function	Touch sensor (L)	Touch sensor (R)
Listening to music
Playback/pause	Touch once
Raise the volume	Touch rapidly 3 times	-
Lower the volume	Touch rapidly 2 times	-
Forward a track	-	Touch rapidly 2 times
Back a track	-	Touch rapidly 3 times
Making a phone call
Receive phone call	Touch once while receiving the call
Reject a phone call	Touch and hold for about 2 seconds while receiving the call
End a phone call	Touch and hold for about 2 seconds during the call
Receive waiting call	Touch once while receiving the waiting call
Reject waiting call	Touch and hold for about 2 seconds during the waiting call
Switch between talking and hold call	Touch once to switch hold and talking call.
Start the voice assistant	Touch and hold for about 2 seconds

• Depending on the Bluetooth^® device or the app, even if you operate the touch sensors on the earphones, some functions may not respond or may operate differently from the descriptions above.

Restoring to the factory settings

Charge the earphones before restoring the earphones to their factory settings.

1. Open the charging cradle firstly.
2. Press and hold the Reset Button of charging cradle for about 5 seconds

Manufactured by:
Panasonic Marketing Europe GmbH
Hangenauer Straße 43, D-65203 Wiesbaden

Authorized Representative in Europe:
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany

Sales and Support Information
Customer Communications Centre

• For further support on your product, please visit our website: www.panasonic.co.uk

Only for European Union and countries with recycling systems These symbols indicate separate collection of waste electrical and electronic equipment or waste batteries. More detailed information is contained in "Operating Instructions (PDF format)".

Declaration of Conformity (DoC)

Hereby, "Panasonic Maketing Europe GmbH" declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Customers can download a copy of the original DoC to our RE products from our DoC server: http://www.ptc.panasonic.eu

Contact to Authorized Representative: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany

Type of wireless	Frequency band	Maximum power (dBm e.i.r.p)
Bluetooth®	2402 – 2480 MHz	4 dBm

Specifications

General

Power supply (Charging cradle)	DC 5 V, 1 A
Internal Battery	Earphones: 3.8 V, Lithium polymer: 40 mAh Charging Cradle: 3.7 V, Lithium polymer: 500 mAh
Operating time* 1 (Earphones)	Approx. 4 hours (AAC) Approx. 3 hours and 50 mins (SBC)
Operating time* 1 (Earphones + Charging cradle)	Approx. 20 hours (AAC) Approx. 19 hours (SBC)
Charging time* 2 (25 ºC)	Earphones: Approx. 1 hour and 30 mins Charging cradle: Approx. 1 hour and 50 mins Earphones with Charging cradle: Approx. 2 hours
Charging temperature range	10 ºC to 35 ºC
Operating temperature range	0 ºC to 40 ºC
Operating humidity range	35 %RH to 75 %RH (no condensation)
Mass	Earphone: Approx. 5 g (one side only: L and R are the same) Charging cradle: Approx. 48 g

Bluetooth^® section

Max RF Power	4.0 dBm
Frequency band	2402 MHz to 2480 MHz
Supported profiles	A2DP, AVRCP, HFP

Charging cradle section

Charging terminal

USB Type-C Shape

Water resistant

Water resistant

IPX4 equivalent (earphones only)

*1 It may be shorter depending on the operating conditions.

*2 The time required to charge the batteries from empty to full.

Copyright, etc.

The Bluetooth^® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Holdings Corporation is under license.

Other trademarks and trade names are those of their respective owners.

QR Code is a registered trademark of DENSO WAVE INCORPORATED.

Other system names and product names appearing in this document are in general the registered trademarks or trademarks of the respective developer companies.

Note that the ^TM mark and ^® mark do not appear in this document.

COPYRIGHT NOTICE
This product uses open source software based on the Free Software Foundation's GPL and other conditions. The relevant conditions apply to the software. The license information for the GPL shown on this product and information about open source software are published on our website. The source code licensed under the conditions of the GPL is available publicly. Please note that these types of software are not covered by warranty. At least 3 years from sale of this product, Panasonic Maketing Europe GmbH will give to any individual or group who contacts us, for a charge of no more than the cost of physically distributing source code, a complete machine-readable copy of the source code and the list of copyright notices corresponding to the GPL software covered under the conditions of the GPL usage agreement. Refer to the following URL to make enquiries regarding the above mentioned content and for information on how to obtain the relevant source code:

When disposing of the product

The built-in batteries are a valuable recyclable resource. When disposing of this product, recycle in accordance with local environmental laws and regulations.

Refer to the specifications in this document for information about the batteries.