RCA RCU300TZ Series - 3 In 1 Universal Remote Control Manual

RCA RCU300TZ Series - 3 In 1 Universal Remote Control Manual

RCA RCU300TZ Series - 3 In 1 Universal Remote Control Manual

Introduction

This user-friendly remote makes juggling multiple remote controls a thing of the past! This one unit controls up to three components, including the most popular brands of TVs, VCRs or DVD players, and satellite receivers, cable boxes, or digital TV converter boxes. The RCU300TZ is easy to use, easy to program, and it gives you total control—at the touch of your fingertips!

FCC statement
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:


Changes or modifications not expressly approved by VOXX Accessories Corporation could void the user's authority to operate the equipment.

Industry of Canada regulatory information
CAN ICES-3 (B)/NMB-3 (B)
Avis d'Industrie Canada
CAN ICES-3 (B)/NMB-3 (B)

Battery Installation

Your RCU300TZ universal remote requires 2 AAA alkaline batteries.

To install the batteries:

Battery Precautions:

Programming with Direct Entry

To program your remote to control up to three components, follow these steps:

Programming with Direct Entry

  1. Press and hold the CODE SEARCH key until the indicator light turns on.
  2. Release the CODE SEARCH key.
  3. Press and release the TV, VCR·DVD or SAT•CBL•DTC key. The indicator light blinks and then remains lit.
    Note: DTC refers to digital TV converter.
  4. Enter the four-digit code, using the numeric keypad. After the code is entered, the indicator light turns off.
    Note: If the indicator light blinks multiple times, you've entered an invalid code. Start from step 2 again.
  5. Aim the remote at the component and press the ON•OFF key. The component should turn off.
    Note: If your component does not respond, try all the codes for your brands. If the codes do not work or your brand is not listed, try the Code Search Method that follows.

If your TV, VCR, DVD, satellite receiver, cable box, or digital TV converter does not respond after you have tried all the codes for your brands, or if your brand is not listed, try searching for your code via the Code Search Entry Method. To program your remote via the Code Search Entry Method, follow these steps:
Programming With Code Search

  1. Press and hold the CODE SEARCH key until the indicator light turns on.
  2. Release the CODE SEARCH key.
  3. Press and release the component key you wish the remote to control—TV, VCR·DVD or SAT•CBL•DTC key. The indicator light blinks once and remains lit.

    Find the ENTER key on your remote (don't press it yet). You will need to press this key quickly in step 6 below.
  4. Press and release the ON•OFF key until the component turns off.

    You may have to press the ON•OFF key up to 200 times.
  5. As soon as the component turns off, press the ENTER key within 4 seconds. The indicator light turns off.
    Note: If you wait longer than 4 seconds to press ENTER, the remote goes to the next code—you will need to start the code search from step 1 again.

The Menu function on your remote is used to make changes on selected settings. The MENU key operates in TV, SAT and DVD Modes. Each menu varies from brand to brand.
The TV Menu is used to make changes in the TV settings, such as changing color, channels and timers. The SAT•CBL•DTC Menu navigates through the Menu screens to make changes to settings. The VCR or DVD Menu you can navigate to languages, subtitles and more.

While in Menu Mode, these keys function as follows:

Mode Vol up/ down Ch +/-
TV, SAT•CBL•DTC, VCR•DVD Cursor moves right/left 7 Cursor moves up/down

To use the Menu function, follow these steps:

To use the Menu function

  1. Press the component button whose menu you wish to access (TV, VCR·DVD or SAT•CBL•DTC).
  2. Press the MENU key. The menu of the chosen component is shown.
    Note: Some functions of some brands may not be fully supported.
  3. To exit the menu mode press the corresponding component key on the remote (TV, VCR·DVD or SAT•CBL•DTC).

Special Notes for Menu Use

  1. In the Menu Mode of RCA, GE and PROSCAN TVs, pressing the MENU key selects the highlighted item. The numeric keys may also be used to select the menu choice.
  2. For SONY components, pressing the ENTER key while in Menu Mode returns to the previous menu.

Accessing Digital Channels

The INPUT and — (dash) key lets you enter a digital sub-channel number, like 59.1, directly. Use the number keys to enter the main channel number (in this case, "59"). Then press the INPUT (–) key and press the subchannel number (in this case, "1"). The INPUT key has two other functions as well: (1) it toggles through all the video sources connected to your TV; and (2) when the remote is in VCR mode, this button toggles between VCR and the TV input.

Care and Maintenance

  • Keep the remote dry. If it gets wet, wipe it dry immediately.
  • Use and store the remote only in normal temperature environments.
  • Handle the remote gently and carefully. Don't drop it.
  • Wipe the remote with a damp cloth occasionally to keep it looking new.
  • Modifying or tampering with the remote's internal components can cause malfunction and invalidate its warranty.

90 Day Limited Warranty

Voxx Accessories Corporation (the "Company") warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor. To obtain repair or replacement within the terms of the warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station. For the location of the nearest warranty station to you, call toll-free to our control office: 1-800-645-4994.

This Warranty does not cover product purchased, serviced or used outside the United States or Canada. This Warranty is not transferable and does not extend to costs incurred for installation, removal or reinstallation of the product. This Warranty does not apply if in the Company's opinion, the product has been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or the simultaneous use of different battery types (e.g. alkaline, standard or rechargeable).
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights, which vary from state/province to state/province.

©2017 VOXX Accessories Corporation
Indianapolis, IN
Audiovox Canada Limited
c/o Genco, 6685 Kennedy Road, Unit 3, Door 14,
Mississauga, Ontario, Canada L5T 3A5
Made in China
Trademarks ® Registered.
www.rcaaudiovideo.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Table of Contents