What's in the box
Register your product and get support at www.philips.com/support
Before using your product, read all accompanying safety information.
Charging
Note: Before use, fully charge the built-in battery.
| Battery status | Battery icon ( ) behavior |
| Low battery | Flashing |
| While charging | Solid on |
| Fully charged or charging stopped | Off |
To turn off
Note: After use, slide the switch to OFF to turn off the speaker.
Connect
- Press SRC repeatedly to select Bluetooth source.
![]()
[bt] is displayed, and the Bluetooth indicator flashes blue slowly. - Press and hold PAIRING until you hear beep sound.
![]()
The product is ready for pairing.
![]()
The Bluetooth indicator flashes blue quickly. - On your Bluetooth device, enable Bluetooth and search for Bluetooth devices.
- Select [Philips SD700] on your device to start pairing and connection. If necessary, enter default password "0000".
![]()
After successful connection, the speaker beeps twice, and the Bluetooth indicator stop flashing. Bluetooth indicator Status Flashing blue quickly Ready for pairing a new device Flashing blue slowly Trying to connect a paired device Solid blue Connected Note:
- Keep away from any other electronic device that may cause interference.
- Before connecting another Bluetooth device, press hold PAIRING for two seconds to disconnect the current device first.
Play
After successful Bluetooth connection, play audio on the Bluetooth device.
- To pause or resume play, press PAIRING.
| Button | Function |
 | Press  or  simultaneously for two seconds to skip to the previous or next track.Press and hold or to fast forward or fast reverse the track during playback, then release to resume play.Press and simultaneously for two seconds Knop nebo / to play all tracks randomly. |
 | Press to start, pause, or resume play. a a jejich |
Tune to FM radio stations
Store radio stations automatically
Note: You can store a maximum of 20 preset radio stations.
Select a preset radio station
How to use
Specifications
| Amplifier | |
| Rated Output Power | 2 X 1.5W RMS |
| Frequency Response | 60 -20000 Hz, ±3 dB |
| Signal to Noise Ratio | >70 dBA |
| Tuner (FM) | |
| Tuning Range | FM: 87.5-108 MHz |
| Tuning Grid | 50 KHz |
| Bluetooth | |
| Bluetooth Version | V3.0+EDR |
| Bluetooth Frequency Band | 2.402GHz ~ 2.48GHz ISM Band |
| Bluetooth Distance | 10 m (Free space) |
| Speaker | |
| Speaker Impedance | 4 ohm |
| Sensitivity | >79± 3dB/m/W |
| General information | |
| Power Supply (through Micro USB socket) | 5 V 500 mA |
| Built-in Battery (Li-polymer battery) | 3.7 V, 850 mAh |
| Eco Standby Power Consumption | <0.5 W |
| Operation Temperature | 0°C - 45°C |
| Dimensions - Main Unit (W x H x D) | 164 x 63 x 33 mm |
| Weight - Main | 0.35 kg |
Specifications are subject to change without notice.
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
