Do not directly touch areas , , and .
Buttons/Indicators/Terminals section
Speaker/Illumination LED section
Base operating section
Be sure to charge the speaker before using it for the first time.
Hint
When battery power becomes low, the ON/STANDBY (red) indicator flashes, and after a short while, the speaker automatically turns off.
Hint
If you press the ON/STANDBY button briefly while the speaker is on, the illumination LED turns on/off.
Select your case from the pairing types below.
If no BLUETOOTH devices are paired with the speaker when it is turned on, it will automatically enter pairing mode. Proceed to step 2.
Hint
If the indicator turns off in the middle of the operation, turn the power off and back on and then perform the operation again.
Disconnecting by One-touch
Touch the N marked area with the device again.
When you cannot establish a connection
Start playback on the BLUETOOTH device and adjust the volume.
Set the volume at an appropriate level on the connected device and adjust the volume with the buttons on the speaker.
Hint
When listening to music from a BLUETOOTH device, remove the connection cord from the AUDIO IN jack.
Canceling the Sleep Timer
Press the TIMER/ PAIRING button again. A sound will indicate that the Sleep Timer has been canceled.
Hint
Switching between stereo mode and double mode
Each time you press the ADD button on the master unit while using the Speaker Add function, the mode switches in this order: stereo mode (left channel) → stereo mode (right channel) → double mode. When switching the channel in stereo mode, the satellite unit automatically switches to the opposite channel.
In stereo mode, the BLUETOOTH indicator for the left (L) channel is orange, and for the right (R) channel is red. In double mode, both BLUETOOTH indicators are orange.
Canceling the Speaker Add function
Press and hold the ADD button for at least two seconds. A sound will indicate when the setting has been canceled.
Note
You cannot listen to music from an external device connected to the AUDIO IN jack while using two speakers.
When the speaker is not working properly, resetting it may resolve some issues.
Use a pointed object, such as a pin, to press the RESET button.
Note
Pairing information is not erased by resetting the speaker.
Refer to the Help Guide for more detailed solutions.
There is noise when connected via BLUETOOTH.
This may be caused by signal interference. Try moving the speaker to a different location. If the noise disappears depending on the location, the speaker has not malfunctioned. Using SongPal to switch the BLUETOOTH codec to [Prioritize connection] (SBC) may also resolve the issue.
The speaker automatically turns off, and the ON/ STANDBY indicator flashes in red.
The speaker has entered protect mode. Unplug the power cord, and then remove all connected cords from the jacks on the speaker. Reconnect the power cord and turn on the speaker. If the issue is not resolved, contact your nearest Sony dealer.
BLUETOOTH is connected, but there is no sound.
SongPal allows you to operate any supported Sony audio devices from your smartphone/iPhone.
How to Download
Search for SongPal in Google Play™ (Play Store) or the App Store, and download.
Features
For details, refer to the help page for SongPal
http://info.songpal.sony.net/help/
Note
Refer to the Help Guide for more easy-to-understand troubleshooting tips. Use a computer or smartphone/iPhone to access it.
http://rd1.sony.net/help/speaker/lspx-s1/h_zz/
©2016 Sony Corporation
Printed in Japan
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.