Important Notes; Safety Instructions; General Information - Bosch rexroth IndraDrive Instruction Manual
Drive controllers power sections hcs02
Hide thumbs
Also See for rexroth IndraDrive:
- Applications manual (100 pages) ,
- Project planning manual (128 pages) ,
- Troubleshooting manual (437 pages)
Table of Contents
IndraDrive Drive Controllers Power Sections HCS02
1
Important notes
1.1
Safety instructions
1.1.1
General information
●
Do not attempt to install and operate the components of the electric
drive and control system without first reading all documentation provided
with the product. Read and understand these safety instructions and all
user documentation prior to working with these components. If you do
not have the user documentation for the components, contact our
Rexroth sales representative. Ask for these documents to be sent
immediately to the person or persons responsible for the safe operation
of the components.
●
If the supplied documents contain some information you do not
understand, it is absolutely necessary that you ask Rexroth for
explanation before you start working at or with the components.
●
If the component is resold, rented and/or passed on to others in any
other form, these safety instructions must be delivered with the
component in the official language of the user's country.
●
Only qualified persons may work with components of the electric drive
and control system or within its proximity.
In terms of this Instruction Manual, qualified persons are those persons
who are familiar with the installation, mounting, commissioning and
operation of the components of the electric drive and control system, as
well as with the hazards this implies, and who possess the qualifications
their work requires. To comply with these qualifications, it is necessary,
among other things,
–
to be trained, instructed or authorized to switch electric circuits and
components safely on and off, to ground them and to mark them,
–
to be trained or instructed to maintain and use adequate safety
equipment,
–
to attend a course of instruction in first aid.
●
The technical data, connection and installation conditions of the
components are specified in the respective application documentations
and must be followed at all times.
●
If the components take the form of hardware, then they must remain in
their original state, in other words, no structural changes are permitted.
It is not permitted to decompile software components or alter source
codes.
●
Do not mount damaged or faulty components or use them in operation.
●
Only use accessories and spare parts approved by Rexroth.
●
Follow the safety regulations and requirements of the country in which
the electric components of the electric drive and control system are
operated.
●
Proper and correct transport, storage, mounting and installation, as well
as care in operation and maintenance, are prerequisites for optimal and
safe operation of the component.
Improper use of these components, failure to follow the safety instructions in
this document or tampering with the product, including disabling of safety
devices, could result in property damage, injury, electric shock or even death.
Important notes
R911319657_Edition 09 Bosch Rexroth AG
1/21
Hide quick links:
Table of Contents
