Update Firmware via USB Drive ....................5 Update Firmware via Web Browser ................... 6 Check the Storage Capacity ......................9 Reset the Unit ..........................10 Packaging ............................... 11 Packaging NVR Gift Box ........................ 11 Honeywell 35 Series NVR HDD Installation Guide...
Page 4
Figure 19 Check Storage Capacity ..................10 Figure 20 Put the NVR Back in the PE Bag ................11 Figure 21 Put the EPEs and Accessory Bag................11 Figure 22 Put the NVR in the Gift Box ..................12 Honeywell 35 Series NVR HDD Installation Guide...
Figure 2 Open The Gift Box Unwrap the NVR PE bag. Unscrew 6 screws in total on three sides of the NVR and take out the NVR’s top cover. Figure 3 Take Out The NVR’s Top Cover Honeywell 35 Series NVR HDD Installation Guide...
No.1 and No. 2 as shown below. Tighten screws for No.1 an No. 2 and add two more screws for No.3 and No. 4 and tighten up them. Figure 5 Lock Screws for HDD Plug the SATA and power connectors into the HDDs. Honeywell 35 Series NVR HDD Installation Guide...
Figure 7 Format HDD on NVR GUI Format HDD on NVR webpage. a) Login the NVR. b) Go to Setting > Storage > Disk. c) Select the HDD and click FORMAT to format the HDD. Honeywell 35 Series NVR HDD Installation Guide...
NVR Firmware update is optional. The upgrade is required when new Firmware is released, or there’s special requirement. Setup NVR Connect the monitor to the NVR. Figure 9 Connect the Monitor Connection power line of Honeywell 35 Series NVR HDD Installation Guide...
There are two ways to update firmware (Local or Web site). You can choose one for your convenience. Update Firmware via USB Drive Prepare a USB drive and format to FAT32. Copy firmware file, e.g. “HON_Honeywell_Series35_HN35XX0XXXX_1_HC1.22.1.42.20220420.bin” into root directory of the USB drive. Honeywell 35 Series NVR HDD Installation Guide...
NVR. Figure 13 Reset the NVR Update Firmware via Web Browser Login the NVR via Web browser. Note: For the first login, you need to create a new password to activate the NVR Honeywell 35 Series NVR HDD Installation Guide...
Figure 14 Login the NVR Go to Setting > System > Maintenance > FW update. Figure 15 Firmware Update Select the correct NVR firmware, e.g. “HON_Honeywell_Series35_HN35XX0XXXX_1_HC1.22.1.42.20220420.bin”. Honeywell 35 Series NVR HDD Installation Guide...
After selecting the firmware, the upgrading will start automatically. The process may take several minutes. Figure 17 Firmware Upgrading Once the upgrading is finished, the web browser will jump to NVR login interface automatically. Honeywell 35 Series NVR HDD Installation Guide...
The below description is taking HN35080200 as an example. Note: Login NVR. Go to Setting > Storage > Disk to check if the storage capacity is the same as the HDD installed in the NVR. Honeywell 35 Series NVR HDD Installation Guide...
Reset the Unit The below description is taking HN35080200 as an example. Note: Please refer to Step Update Firmware via USB Drive Update Firmware via Web Browser reset the NVR to factory default status. Honeywell 35 Series NVR HDD Installation Guide...
Figure 20 Put the NVR Back in the PE Bag Put the EPEs and accessory bag back. Don’t forget to put accessories into the accessory box. Note: Figure 21 Put the EPEs and Accessory Bag Put the NVR in the gift box. Honeywell 35 Series NVR HDD Installation Guide...
Figure 22 Put the NVR in the Gift Box Seal the Gift box Figure 22 Seal the Gift box Honeywell 35 Series NVR HDD Installation Guide...
Page 17
Parc de Haute Technologie Tel: +82-2-799-6114 3-7 rue Georges Besse 92160 Antony, France Honeywell Building Technologies – Security & Fire (Pacific) Tel: +33 (0) 1 40 96 20 50 Honeywell Ltd 9 Columbia Way Honeywell Building Technologies – Security Italia SpA...