Pioneer SPH-20DAB - Smartphone Receiver Quick Start Guide

Before You Start

This guide is intended to guide you through the basic functions of this unit.
For details, please refer to the Operation Manual stored on the website. https://www.pioneer-car.eu/eur/

To ensure proper use, please read through this guide before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this guide. Please keep the guide in a safe and accessible place for future reference.

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

If you experience problems
Should this unit fail to work properly, please contact your dealer or nearest authorized PIONEER Service Station.

Basic operation

SPH-20DAB

Operating the smartphone holder

Removing the smartphone holder

1. Pull out the holder by holding the anti slip portion on the edge of the holder until the holder is completely visible.
   
   
   Never pull up the holder until the holder is completely visible.
2. Pull up the holder vertically.
   
   
   Make sure that the line can be seen when the holder is pulled up vertically.
   
   

Attaching the smartphone to the holder

Compatible smartphone size
H: 58 mm - 170 mm
W: 58 mm - 87 mm
D: 4 mm - 10 mm
Weight: under 0.25 kg

1. Hook the smartphone on the upper arm and then push it into the lower arm.
   
   
2. Slide the lower arms position to avoid hitting the lower arm and smartphone buttons against each other.
   

NOTES

Bluetooth connection

Up to two Bluetooth telephones can be connected simultaneously.

Making a connection with Pioneer Smart Sync

Pioneer Smart Sync is the application that intelligently brings your maps, messages, and music together in the vehicle.

For details on what operations are available on the application, see the application's help section.

1. Connect this unit with the mobile device via Bluetooth (refer to "Bluetooth connection").
   Pioneer Smart Sync on the iPhone/Android device starts automatically.

Pioneer Smart Sync connection via wired connection
You can also make the Pioneer Smart Sync connection via USB connection.

1. Press and hold to display the main menu.
2. Press to select [SYSTEM], then press to confirm.
3. Press to select [APP CTL], then press to confirm.
4. Press to select [WIRED], then press to confirm.
   Pioneer Smart Sync on the iPhone/Android device starts automatically.

NOTE
The automatic connection may fail depending on your mobile device. In that case, press and hold .

TIP
Once the Pioneer Smart Sync connection is made between the unit and the mobile device, you can pair from the application on the mobile device from the next time.