Epson LS300BATV, LS300WATV Quick Setup Guide

Introduction

Before using the projector, make sure you read these instructions and the safety instructions in the online User's Guide.
Note: Your product may differ from the illustrations on this sheet, but the instructions are the same. Some product features may not be available in all regions.

Contents

Make sure your projector box includes all of these parts:

You can place the projector on almost any flat surface. See the online User's Guide for more information.

Connect the projector

Android TV^™
Your projector includes built-in Android TV with apps that can be launched when the remote control is paired to the projector. To stream content, make sure you have a wireless Internet connection and log-in as necessary for each app.

Chromecast^™ built-in
You can stream content from devices using Chromecast-compatible apps. See the online User's Guide for details.

Google^® Search
You can send voice commands to the projector using the remote control or a Google Home^™ speaker. See the online User's Guide for details.
Note: This feature may not be available in all regions.

Video device or computer
You can connect video equipment or a computer. Connect one end of an HDMI cable (not included) to one of the projector's HDMI ports and the other end to an HDMI port on your video device or computer. See the online User's Guide for details.

Do not turn on the video source before connecting it to the projector; you may damage the projector.

Note: If you are connecting an external audio/video receiver to the projector, use the projector's HDMI2 (ARC)port. See the online User's Guide for more information.

Connect audio

Built-in speakers
The projector has built-in speakers that can play audio from the video source you are viewing.
You can also use the projector's speakers to play sound from a device connected via Bluetooth^®. Press the button on the remote control or projector, then select the projector from your device. See the online User's Guide for details.

Optical audio out port
You can connect the projector to an amplifier or speakers through the Optical Out port. See the online User's Guide for more information.

Turn on your projector

Note: If you are projecting from an external video device or computer, make sure it is connected to the projector first and turn it on after the projector is turned on.

1. Plug in the projector.
   
   
2. Press the power button on the projector or remote control. The status light flashes blue and then stays on.
   
   

Note: To shut down the projector, press the power button.

Adjust the image

1. To adjust the image position, move the projector in the appropriate direction while keeping it level and parallel to the screen. You can also extend or retract the front feet to correct horizontal tilt or vertical distortion, if necessary.
   
   
2. Open the focus lever cover.
   
   
3. Move the focus lever up or down to adjust the image sharpness.
   
   
4. If the image shape still requires adjustment, press the button on the remote control and use the directional and Enter buttons to adjust each point as needed.
5. Press the button on the remote control to return to the point selection screen. Press the button again when you are finished.

Note: For more adjustment methods, see the online User's Guide.

Using the remote control

Install two AAA batteries as shown below.

Note: You must first pair the remote control to the projector to use Android TV and video-on-demand features. See the online User's Guide for more information.

Troubleshooting

• If you see a blank screen, check the following:
  • Make sure the power light on the projector is blue and not flashing.
  • Press the power button or the button on the projector or remote control to wake the projector from standby or sleep mode, if necessary.
• If you see a blank screen when a computer is connected, check the following:
  • If you're using a Windows^® laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear.
    On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.
  • If you're using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.

Registration

Register today to get product updates and exclusive offers. You can register online at www.epson.com/webreg.

Where to get help

Manual
For more information about using the projector, you can view or download the online manual from the Epson website, as described below.

Internet support
Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product to download software and utilities, view the manual, get FAQs and troubleshooting advice, or contact Epson.

Telephone support services
To use the Epson^® PrivateLine^® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Optional accessories

For a list of optional accessories, see the online User's Guide.
You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epsonstore.ca (Canadian sales).