Yamaha YHT-1840 - Home Theater Package Connection Guide

Also See for YHT-1840:

Connection manual (2 pages)

Table of Contents

Contents

1 Introduction
2 Speakers and Antenna
3 AV Components
4 Videos
- 4.1 Yamaha YHT-1840 - Set up video
5 Documents / Resources
- 5.1 Download manual

Yamaha YHT-1840 - Home Theater Package Connection Guide

Introduction

The Yamaha YHT-1840 Home Theater Package includes everything you need to add great sound to your home theater. By following the steps in this Connection Guide, you'll have your home theater set up in no time and be enjoying music and movies like never before. Part A explains how to connect the speakers and antenna. Part B explains how to connect various AV components. See the relevant owner's manuals for full instructions and precautions.

Disconnect all components from AC outlets before proceeding

Speakers and Antenna

Checking the package contents

Checking the package contents
Unpack and check the package contents. The following items are necessary to complete this Connection Guide. See the owner's manuals for a complete list of supplied items.

Positioning the speakers

Positioning the speakers
The four front and surround speakers are identical, so it doesn't matter which one you use in each position.
Position the speakers as shown. See the owner's manuals for more information on installing the speakers.

Preparing the cables, speakers and subwoofer

Connect the speaker cables to the front speakers (), surround speakers (), center speaker () and subwoofer (). Make sure you connect the speakers and subwoofer with the correct polarity—positive (+) terminals to positive (+) terminals, and negative (–) terminals to negative (–) terminals.

Connecting the front speakers

Connecting the front speakers
Connect the front speaker () cables to the AV Receiver. Make sure you connect the speakers with the correct polarity—positive (+) terminals to positive (+) terminals, and negative ( – ) terminals to negative ( – ) terminals.

Connecting the center and surround speakers

Connecting the center and surround speakers
Connect the center speaker () and surround speaker () cables to the AV Receiver. Make sure you connect the speakers with the correct polarity—positive (+) terminals to positive (+) terminals, and negative (–) terminals to negative (–) terminals.

Connecting the subwoofer

Connecting the subwoofer
Connect the subwoofer () cables to the AV Receiver. Make sure you connect the subwoofer with the correct polarity—positive (+) terminals to positive (+) terminals, and negative (–) terminals to negative (–) terminals.

Connecting the antenna

Connecting the antenna
Connect the FM antenna () to the AV Receiver, as shown. See the owner's manuals for more information about connecting antenna.

AV Components

Disconnect all components from AC outlets before proceeding.

Connecting HDMI-capable components

If your TV and BD/DVD players or recorders or satellite/cable set-top box have HDMI jacks, you can connect them via the AV Receiver. Using HDMI cables (not included), connect the AV Receiver's HDMI OUT jack to an HDMI input on your TV, and connect your BD/DVD players or recorders and satellite/cable set-top box to the AV Receiver's HDMI 1(BD/DVD) and HDMI 2 jacks, respectively, as shown.
See the owner's manuals for more information about HDMI.

Connecting your TV
Connecting your BD/DVD players or recorders, satellite/cable set-top box

Connecting your TV for audio output

You can listen to TV audio through the AV Receiver and speakers by connecting an audio output on your TV to an audio input on the AV Receiver with, for example, an optical digital audio cable (not included), as shown. To listen to TV audio, select the appropriate input source on the AV Receiver.

Connecting your TV for audio output

Your TV supports the Audio Return Channel function

Connect the AC power cable

Select the switch position according to your local voltage using a straight slot screwdriver.

Set the VOLTAGE SELECTOR
(General, Brazilian models)
Connect the AC power cable - Step 1

Voltages are AC 110-120/220-240 V, 50/60 Hz.

The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local voltage BEFORE plugging the power cable into the AC wall outlet. Improper setting of the VOLTAGE SELECTOR may cause damage to this unit and create a potential fire hazard.

(Other models)
Connect the AV Receiver and your other AV components to suitable AC outlets.
Connect the AC power cable - Step 2

Playback

Basic playback procedure

Turn on external components (TV, BD player, etc.) connected to this unit.
Use the input selection keys to select an input source.
Play the external component that you have selected as the source input, or select a radio station on the tuner.
Refer to the instruction manuals provided with the external component for details.
Press VOLUME +/– to adjust the volume. To mute the output,
Press MUTE to mute the audio output.
Press MUTE again to unmute.

More various functions are available with the unit.
Refer to the "HTR-2071 Owner's Manual" for details on effective use of the unit.

Connecting external devices other than BD/DVD players
Various devices, audio players, such as CD players, etc. can be connected to the unit.

Changing input settings with a single key (SCENE function)
This unit has a SCENE function that allows you to turn the power on and change input sources and sound field programs with one key.

Enjoying sound field programs
You can enjoy multi-channel playback for almost any sound source using various sound field programs stored on the chip, and a range of sound decoders. For more detail, see the relevant owner's manuals for full operating instructions.

Time to enjoy your Yamaha Home Theater Package!
Now, relax and enjoy the great sound of your Yamaha Home Theater Package.