Pioneer DEH-S210UI Quick Start Guide
Connections
- When installing this unit in a vehicle without an ACC (accessory) position on the ignition switch, failure to connect the red cable to the terminal that detects operation of the ignition key may result in battery drain.
- Use of this unit in conditions other than the following could result in fire or malfunction.
- When rear speaker output is used by 2 Ω of subwoofer, use speakers over 70 W (maximum input power).
* Please refer to connections for a connection method.
- To prevent a short-circuit, overheating or malfunction, be sure to follow the directions below.
- The graphical symbol placed on the product means direct current.
This unit
- Wired remote input
Hard-wired remote control adapter can be connected (sold separately).
Power cord
- Depending on the kind of vehicle, the function of and may be different. In this case, be sure to connect to and to .
- Yellow
Back-up (or accessory) - Yellow
Connect to the constant 12 V supply terminal. - Red
Accessory (or back-up) - Red
Connect to terminal controlled by the ignition switch (12 V DC). - Blue/white
The pin position of the ISO connector will differ depending on the type of vehicle. Connect and when Pin 5 is an antenna control type. In another type of vehicle, never connect and . - Blue/white
Connect to the system control terminal of the power amp (max. 300 mA 12 V DC). - Blue/white
Connect to the auto-antenna relay control terminal (max. 300 mA 12 V DC). - Yellow/black
If you use equipment with a Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. - Speaker leads
White: Front left
White/black: Front left
Gray: Front right
Gray/black: Front right
Green: Rear left or subwoofer
Green/black: Rear left or subwoofer
Violet: Rear right or subwoofer
Violet/black: Rear right or subwoofer - Orange/white
Connect to a car's illumination signal. - ISO connector
In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors.
NOTES
Power amp
(sold separately)
Perform these connections when using the optional amplifier.
- System remote control
Connect to blue/white cable.
Installation
- Do not install this unit where:
- Optimum performance is obtained when the unit is installed at an angle of less than 60°.
- When installing, to ensure proper heat dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents.
DIN mount installation
When not using the supplied mounting sleeve
- Determine the appropriate position where the holes on the bracket and the side of the unit match.
- Tighten two screws on each side.
Removing the unit (installed with the supplied mounting sleeve)
- Remove the trim ring.
- Notched tab
- Insert the supplied extraction keys into both sides of the unit until they click into place.
- Pull the unit out of the dashboard.
Basic operation
DEH-S210UI
About the main menu
You can adjust various settings in the main menu.
- Press the M.C. dial to display the main menu.
- Turn the M.C. dial to select one of the categories below, then press to confirm.
- Turn the M.C. dial to select the options, then press to confirm.
Frequently used operations
Purpose | Operation |
Turn on the power | Press SRC/OFF to turn on the power. Press and hold SRC/OFF to turn off the power. |
Adjust the volume | Turn the M.C. dial. |
Select a source | Press SRC/OFF repeatedly. |
Change the display information | Press DISP repeatedly. |
Return to the previous display/list | Press BAND/ . |
Return to the normal display from the menu | Press and hold BAND/ . |
Change the display brightness | Press and hold BAND/ . |
Boost the bass level | Press BASS. |
Setup operation
When you turn the ignition switch to ON after installation, [SET UP:YES] appears in the display.
- Press the M.C. dial.
- Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item | Description |
LANGUAGE [ENG](English), [РУС](Russian), [TUR](Turkish) | Select the language to display the text information from a compressed audio file. |
CLOCK SET | Set the clock. - Turn the M.C. dial to adjust the hour, then press to confirm. The indicator moves to the minute setting automatically.
- Turn the M.C. dial to adjust the minute, then press to confirm.
|
FM STEP [100], [50] | Select the FM tuning step from 100 kHz or 50 kHz. |
- [QUIT:YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. dial to select [QUIT:NO], then press to confirm. - Press the M.C. dial to confirm the settings.
CD/USB/iPod®/AUX operation
CD
- Insert a disc into the disc loading slot with the label side up.
To eject a disc, stop playback first then press .
USB/iPod
MTP connection
A device installed with Android OS 4.0 or most of later versions can be connected to the unit via MTP, using the cable supplied with the Android device. However, depending on the connected device, OS version or the numbers of the files in the device, audio files/songs may not be able to be played back via MTP.
NOTE
If you use an MTP connection, [ANDROID WIRED] needs to be set to [MEMORY] in the SYSTEM settings.
AUX
- Press SRC/OFF to select [AUX] as the source.
Making a connection with Pioneer ARC APP
Pioneer's Advanced app converts your compatible smartphone into a powerful touchscreen remote control.
Do not attempt to operate the application while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the application.
When making a connection with an Android device
- Turn the M.C. dial to select [ANDROID WIRED], then press to confirm.
- Turn the M.C. dial to select [APP CONTROL], then press to confirm.
- Turn the M.C. dial to select [P.APP AUTO ON], then press to confirm.
- Turn the M.C. dial to select [ON], then press to confirm.
- Connect this unit with the device via USB.
Pioneer ARC APP on the Android device starts automatically.
When making a connection with an iPhone
- Press and hold the M.C. dial. Pioneer ARC APP on the iPhone starts.
NOTE
If the connection fails, launch Pioneer ARC APP on the iPhone.
Listening to Spotify®
(Only compatible with Spotify installed on iPhone)
Update the firmware of the Spotify application to the latest version before use.
Before you start, connect this unit with the mobile device via USB (iPhone only).
- Press SRC/OFF to select [SPOTIFY].
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Need Assistance?
Do you have a question about the DEH-S210UI that isn't answered in the manual? Leave your question here.