Sony BRAVIA XR XR-77A80K, 65A80K, 55A80K Reference Guide

Sony BRAVIA XR XR-77A80K, 65A80K, 55A80K Reference Guide

Also See for BRAVIA XR-77A80K:
Sony BRAVIA XR XR-77A80K, 65A80K, 55A80K Reference Guide

About Manuals

This TV comes with the following manuals. Please retain the manuals for future reference.

Setup Guide

  • TV installation and setup.

Reference Guide (this manual) / Safety Documentation

  • Safety information, remote control, troubleshooting, wall-mount installation, specification, etc.

Help Guide (On screen Manual)

  • To open it, press (Input select) on the remote control and select [Help]. If [Help] does not exist, select [Edit] and add [Help].
  • You can refer to the Help Guide with your smartphone.

    https://rd1.sony.net/help/tv/jga1/h_ga/

Read the End User Software Licence Agreement before using your Sony product. Using your product indicates your acceptance of the End User Software Licence Agreement. The software licence agreement between you and Sony is available online at Sony website (https://www.sony.net/tv-software-licenses/) or on your product screen. Press (Quick Settings) on the remote control and select [Settings] → [System] → [About] → [Legal information] → [Notices and licences].

Note

  • Setting menus are subject to change without notice due to software updates.
    For latest information, visit Sony support website.

Location of the identification label

Labels for the TV Model No. and Power Supply rating are located on the rear of the TV.

Safety Information

Installation/Set-up

Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electric shock or damage and/or injuries.

Installation

  • Install the TV so that the TV's Table-Top Stand does not protrude out from the TV stand (not supplied). If the Table-Top Stand protrudes out from the TV stand, it may cause TV set to topple over, fall down, and cause personal injury or damage to the TV.

Transporting

  • When transporting the TV set by hand, hold it as shown below. Do not put stress on the panel and the frame around the screen.

  • When handling or mounting the TV set, do not lay down the TV.

Topple prevention

(Models with supplied support belt kit)
Refer to the Setup Guide on top of the cushion.

The supplied wood screw is only for affixing to a solid object made of wood.

(Except models with supplied support belt kit) Topple Prevention

Protecting the TV Screen (OLED TV)

Precautions to Protect the Screen from Damage

Image retention
OLED TV's are susceptible to image retention (burn-in) due to the characteristics of the materials used. Image retention may occur if images are displayed in the same location on the screen repeatedly or over extended periods of time. This is not a malfunction of the TV. Avoid displaying images that may cause image retention.

The following are examples of images that may cause image retention:

To reduce the risk of image retention:

  • Turn off the OSD (On Screen Display) by pressing (Control menu) button and select [Info], and turn off the menus from connected equipment.

The TV has following features to help reduce/prevent image retention.

Panel refresh
A panel refresh will adjust the panel uniformity. Panel refresh can be performed and should only be used when image retention is very noticeable.

Pixel shift
Automatically moves the image on the screen to prevent image retention.

Other feature
The screen brightness is automatically reduced when displaying still images, clocks, bright colours or logos etc.

Using TV as Part of Audio System

Note

  • Refer to the instruction manual of the Audio system with S-CENTER OUT terminal for detail.
    Using TV as Part of Audio System

Remote Control and TV

The remote control shape, layout, availability and function of remote control buttons may vary depending on your region/country/TV model/TV settings*1.

Remote Control Overview

  1. (Power)
    TV: Display TV channel list or switch to input.
    (Quick settings): Display Quick Settings.
    (Input select): Display and select the input source, etc.
    (Control menu): Display the Control menu.
  2. / / / / : On screen menu navigation and selection.
    (Back)
    (Home)
    (Google Assistant) / (Microphone): Google Assistant*2*3 or voice search*3.
  3. + / – (Volume)
    (Mute)*4
    CH + / – (Channel)

    (Guide): Display the digital programme guide of TV or TV box*5.
  4. App buttons*6

TV Overview

  1. BUILT-IN MIC SWITCH*2: Turn on/off the built-in MIC.
  2. (Power)
  3. Remote Control sensor / Light sensor / LED
  4. Built-in MIC*2*3*7: To enable the built-in MIC, press the Google Assistant/microphone button on the remote control and follow the on-screen instructions.

*1 For other remote control models, refer to the online Help Guide for details.
*2 Only for limited region/country/model/language.
*3 Google Assistant or voice search requires an Internet connection.
*4 Accessibility shortcut is available by pressing and holding (Mute).
*5 [TV box setup] setting is required.
*6 Installation of the NETFLIX app may be required depending on your region/country.
*7 Power consumption will increase when the built-in MIC is enabled as it is always listening.

For more information, refer to the Help Guide.

Press (Input select) on the remote control and select [Help]. If [Help] does not exist, select [Edit] and add [Help].

Installing the TV to the Wall

Using the optional Wall-Mount Bracket (SU-WL850 or SU-WL450)* (not supplied)

To Customers:
For product protection and safety reasons, Sony strongly recommends that installation of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.

To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this product.

Wall-Mount Bracket Installation Information
For instructions on Wall-Mount Bracket installation, see the Installation Information (Wall-Mount Bracket) on the product page for your TV model. https://www.sony-asia.com/support

  • For safety reasons, it is strongly recommended that you use Sony accessories, including:
  • Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the Wall-Mount Bracket to the TV set. The supplied screws are designed as indicated by illustration when measured from the attaching surface of the Wall-Mount Bracket.
    The diameter and length of the screws differ depending on the Wall-Mount Bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc.
    Wall-Mount Bracket Installation

* Only for limited region/country/model.

Optional Camera and Microphone Unit (not supplied) Cable Management

Cable Management

Troubleshooting

General troubleshooting for issues like: black screen, no sound, frozen picture, TV does not respond, or network is lost, do the following steps.

  1. Restart your TV by pressing the power button on the remote control for about five seconds. The TV will restart. If the TV does not recover, try unplugging the AC power cord (mains lead) then press the power button on the TV and release it. Wait for two minutes, and plug in the AC power cord (mains lead).
    Or, press the power button on the TV for about 40 seconds until the TV turns off.

When you plug in the TV, the TV may not be able to turn on for a while even if you press the power button on the remote control or the TV.
It takes time to initialize the system. Wait for about one minute, then operate it again.

The remote control does not function.

The parental lock password has been forgotten.

The screen becomes darker while watching TV.

You are concerned about image retention.
If the same image is displayed repeatedly or for long periods of time, image retention may occur. To reduce image retention, we recommend that you turn off the TV normally by pressing the power button on the remote control or the TV.

Note

The message [Panel refresh did not finish...] is displayed.
When i) the TV is turned on or ii) the AC power cord (mains lead) is unplugged during the Panel refresh, the Panel refresh is not completed. Please avoid the above two conditions during the Panel refresh.

For more information on troubleshooting, refer to the Help Guide.

Press (Input select) on the remote control and select [Help]. If [Help] does not exist, select [Edit] and add [Help].

Specifications

System

Panel system: OLED (Organic Light Emitting Diode) Panel

TV system: Depend on your country/area selection/TV model
Analogue: B/G, I, D/K, M
Digital: DVB-T/DVB-T2

Colour system: PAL/SECAM/NTSC3.58/NTSC4.43

Channel coverage: Depend on your country/area selection/TV model
Analogue: UHF/VHF/Cable
Digital: UHF/VHF

Sound output
XR-77A80K: 20 W + 10 W + 10 W + 10 W + 10 W
XR-65A80K / 55A80K: 10 W + 10 W + 10 W + 10 W + 10 W

Wireless technology
Protocol IEEE 802.11a/b/g/n/ac
Bluetooth® Version 4.2

Input/Output jacks

Antenna (aerial)/cable
75 ohm external terminal for VHF/UHF

/ VIDEO IN / S-CENTER SPEAKER IN
Video/Audio input (mini jack)
S-centre speaker input (mini jack)

HDMI IN 1/2/3/4 (HDCP 2.3-compatible)
Video:
4096 × 2160p (50, 60 Hz)*1*2, 4096 × 2160p
(24 Hz)*1, 3840 × 2160p (50, 60 Hz)*2, 3840 × 2160p
(24, 25, 30 Hz), 1080p (30, 50, 60, 100, 120 Hz), 1080/24p, 1080i (50, 60 Hz), 720p (30, 50, 60 Hz), 720/24p, 576p, 480p, PC Formats*3
3840 × 2160p (100, 120 Hz)*2*4
Audio:
In eARC (Enhanced Audio Return Channel) mode
Refer to the online Help Guide for details.
Except eARC mode
5.1 channel linear PCM: 32/44.1/48/88.2/96/176.4/192 kHz 16/20/24 bits, Dolby Audio, Dolby Atmos, DTS

eARC/ARC (Enhanced Audio Return Channel/Audio Return Channel) (HDMI IN 3 only)*5
In eARC mode
Refer to the online Help Guide for details.
In ARC mode
Two channel linear PCM: 48 kHz 16 bits, Dolby Audio, Dolby Atmos, DTS

DIGITAL AUDIO OUT (OPTICAL)
Digital optical jack (Two channel linear PCM: 48 kHz 16 bits, Dolby Audio, DTS)

(Stereo mini jack)
Headphone


USB port 1 supports High Speed USB (USB 2.0)
USB port 2 supports Super Speed USB (USB 3.2 Gen 1)

LAN
10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection speed may differ. The communication rate and quality are not guaranteed.)

Power and others

Power requirements
XR-77A80K: 110 V – 240 V AC, 50/60 Hz
XR-65A80K / 55A80K: 220 V – 240 V AC, 50/60 Hz

Energy Efficiency Class*6 (For Jordan only)
XR-65A80K: A+
XR-55A80K: A

Screen size (measured diagonally) (Approx.)
XR-77A80K: 77 inches / 194.7 cm
XR-65A80K: 65 inches / 163.9 cm
XR-55A80K: 55 inches / 138.8 cm

Power consumption
Indicated on the rear of the TV

Power consumption*6
In [Standard] mode (For Jordan only)
XR-65A80K: 121 W
XR-55A80K: 104 W

Annual energy consumption*6 (For Jordan only)*7
XR-65A80K: 168 kWh per year
XR-55A80K: 144 kWh per year

Standby power consumption*6*8*9
Jordan/UAE/Egypt: 0.50 W, Others: 0.5 W

Display resolution (horizontal × vertical) (pixels)
3840 × 2160

Output rating
500 mA (for USB 1), 900 mA (for USB 2)

Dimensions (Approx.) (w × h × d) (mm)

with Table-Top Stand

Standard position:
XR-77A80K: 1722 × 1024 × 389
XR-65A80K: 1448 × 862 × 330
XR-55A80K: 1227 × 738 × 330

Narrow position:
XR-77A80K: 1722 × 1024 × 389
XR-65A80K: 1448 × 862 × 330
XR-55A80K: 1227 × 738 × 330

Soundbar position:
XR-77A80K: 1722 × 1066 × 389
XR-65A80K: 1448 × 904 × 330
XR-55A80K: 1227 × 780 × 330

without Table-Top Stand

XR-77A80K: 1722 × 998 × 54
XR-65A80K: 1448 × 836 × 53
XR-55A80K: 1227 × 712 × 53

Stand width (Approx.) (mm)

Standard position:
XR-77A80K: 1409
XR-65A80K / 55A80K: 1184

Narrow position:
XR-77A80K: 619
XR-65A80K / 55A80K: 847

Soundbar position:
XR-77A80K: 1409
XR-65A80K / 55A80K: 1184

Mass (Approx.) (kg)

with Table-Top Stand
XR-77A80K: 37
XR-65A80K: 24.6
XR-55A80K: 19.5

without Table-Top Stand
XR-77A80K: 34.8
XR-65A80K: 23
XR-55A80K: 17.9

Others

Optional accessories
Wall-Mount Bracket: SU-WL850 / SU-WL450
Camera and Microphone Unit: CMU-BC1

Operating temperature: 0 ºC – 40 ºC

*1 When 4096 × 2160p is input and [Wide mode] is set to [Normal], the resolution is displayed as 3840 × 2160p. To display 4096 × 2160p, set [Wide mode] setting to [Full 1] or [Full 2].

*2 Refer to the on screen menu to set [HDMI signal format].

*3 Refer to the online Help Guide for details.

*4 HDMI IN 3 & 4 only. Use the Ultra High Speed HDMI Cable to connect.

*5 Connect your audio system to the HDMI IN 3 to route TV audio to your audio system.

*6 This information is for EU and other countries whose relevant regulation is based on EU energy labelling regulation.

*7 Energy consumption in kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used.

*8 Specified standby power is reached after the TV finishes necessary internal processes.

*9 Standby power consumption will increase when your TV is connected to the network.

Note

Notes on Digital TV function

  • Any functions related to Digital TV () will only work in countries or areas where DVB-T/DVB-T2 (MPEG-2 and H.264/MPEG-4 AVC) digital terrestrial signals are broadcast. Please confirm with your local dealer if you can receive a DVB-T/DVB-T2 signal where you live.

Trademark Information

  • For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, Digital Surround, and the DTS logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2020 DTS, Inc. ALL RIGHTS RESERVED.

Support

https://www.sony-asia.com/support

5-037-708-11(1)

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Table of Contents