Fujitsu LIFEBOOK U9312X Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. LIFEBOOK U9312X
  6. Operating manual

Fujitsu LIFEBOOK U9312X Operating Manual

Hide thumbs Also See for LIFEBOOK U9312X:
Table of Contents

Quick Links

System
Operating manual
FUJITSU LIFEBOOK U9312X
Table of Contents
loading

Related Manuals for Fujitsu LIFEBOOK U9312X

Summary of Contents for Fujitsu LIFEBOOK U9312X

  • Page 1 System Operating manual FUJITSU LIFEBOOK U9312X...
  • Page 2 Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 Mies-van-der-Rohe-Straße 8 80807 Munich, Germany Name and address of the importer in the UK Fujitsu Services Limited 22 Baker Street, London, W1U 3BW, United Kingdom "http://www.fujitsu.com/fts/" Copyright © Fujitsu Client Computing Limited2022. All rights reserved. Publication Date 05/2022 Edition 1...
  • Page 5 FUJITSU LIFEBOOK U9312X Operating manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes...
  • Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.

  • Page 7: Table Of Contents

    Using the power-management features ........... 48 Fujitsu...
  • Page 8 Exiting BIOS Setup Utility ..............80 Exit Saving Changes - save changes and exit BIOS Setup Utility ..... . . 80 Fujitsu...
  • Page 9 Index ................. . 98 Fujitsu...
  • Page 10 Contents Fujitsu...

  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.

  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...

  • Page 13: Ports And Controls

    8 = Fingerprint sensor or palm sensor (configuration dependent) 3 = Camera LED 9 = Touchpad 4 = Shortcut Button for Microsoft Windows Ink 10 = Touchpad buttons 5 = Tablet mode camera 6 = Status display of tablet mode camera Fujitsu...
  • Page 14 5 = ON/OFF button 2 = Pen slot 6 = Memory card slot 3 = SIM card slot 7 = USB 3.2 port (USB Type-A) (configuration-dependent, 8 = LAN connector (removable) protected by cover) 9 = Security Lock device 4 = Loudspeaker Fujitsu...
  • Page 15 Ports and controls Bottom 1 = Off button for the battery (recessed) Fujitsu...

  • Page 16: Important Notes

    Pay attention to the additional safety notes for devices with wireless components provided in the "Safety/Regulations" manual. This notebook complies with the relevant safety regulations for data processing equipment. If you have questions about using your notebook in a particular area, please contact your sales outlet or our Hotline/Service Desk. Fujitsu...

  • Page 17: Additional Safety Notes For Devices With Radio Components

    You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment. Energy saving under Windows ► Make use of the power management features (see ""Using the power-management features", Page 48"). Fujitsu...

  • Page 18: Travelling With Your Notebook

    ► Unplug the mains adapter and all external devices from the power socket. ► Disconnect the mains adapter cable and the data cables for all external devices. ► Close the LCD screen. ► To protect against damaging jolts and bumps, use a notebook carrying case to transport your notebook. Fujitsu...

  • Page 19: Cleaning The Notebook

    ► Disconnect the battery ("Switch the battery off and on", Page 47). ► Allow the notebook to dry for at least 24 hours. ► If the notebook cannot be switched on after reconnecting the power adapter, please contact our Hotline/Service desk. Fujitsu...

  • Page 20: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...

  • Page 21: Selecting A Location

    Keep other objects at least 100 mm / 3.94 inches away from the device and its mains adapter to ensure adequate ventilation. • Never cover the ventilation slots of the device. • Do not expose the device to extreme environmental conditions. Protect the device from dust, humidity, and heat. Fujitsu...

  • Page 22: Connecting The Mains Adapter

    "Technical data", Page ► Plug the mains cable (2) into a mains outlet. ► Connect the supplied USB Type-C cable (3) of the power adapter to one of the Intel® Thunderbolt™ 4 USB power ports. Fujitsu...

  • Page 23: Switching On The Device For The First Time

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".

  • Page 24: Working With The Notebook

    Please refer to the notes in "Important notes", Page Status indicators Statusindicators The status indicators provide information about the status of the power supply, the drive and the keyboard functions. Fujitsu...
  • Page 25 In the case of overlay keys, the character printed on the upper left of the key will appear when that key is pressed. Scroll Lock indicator Indicator ScrollLock Indicator is illuminated: the key combination has been pressed. The effect that this key has varies between applications. Fujitsu...

  • Page 26: Opening The Notebook

    Working with the notebook Opening the notebook ► Open the LCD screen. Fujitsu...

  • Page 27: Switching On The Notebook

    Control Panel - Hardware and Sound - Power Options If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page Fujitsu...

  • Page 28: Different Ways To Use Your Notebook

    ► Raise the LCD display into a vertical position. You can fold the LCD screen down infinitely variably in an angle between 0 and 360 degrees. ► Fold the monitor down completely until the rear side of the monitor is resting on the bottom of the device. Fujitsu...

  • Page 29: Select Display Orientation (Portrait Or Landscape Orientation)

    In Settings there are profiles saved for operation with different screen orientations. These profiles have preset standard configurations that can be modified as desired. These settings do not just affect the screen settings on the Tablet PC, but also those on externally connected monitors. Fujitsu...

  • Page 30: From Tablet Pc To Notebook

    Working with the notebook From Tablet PC to notebook ► Raise the LCD screen into a vertical position. ► Fold down the monitor until you reach the desired position. Fujitsu...

  • Page 31: Switching Off The Notebook

    Working with the notebook Switching off the notebook Notebook ► Close all applications and then shut down the operating system (please see the "Operating System Manual"). Fujitsu...

  • Page 32: Closing The Notebook

    Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish, Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian. Under Windows you can set the required language under Settings - Time & language - Language & region . Fujitsu...

  • Page 33: Touchscreen

    "Screen resolutions for integrated screen and external screens", Page High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a particular resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear image.

  • Page 34: Using The Touch Screen

    "Calibrating the pen", Page Please note: There are separate calibration programs available for calibrating the stylus pen and for calibrating finger-based operation. Do not use the calibration tool for the stylus pen to calibrate finger-based operation. Fujitsu...

  • Page 35: Using The Stylus Pen

    To avoid damage, the pen should be stored in the slot when not in use. The pen can be influenced by electromagnetic fields (cursor quivers or jumps). There may be a few areas on the screen where the cursor quivers slightly in spite of pressing the pen down firmly. Fujitsu...
  • Page 36 Opening a context Click with the right-hand mouse Place the pen directly on the required menu button. element and hold the pen pressed against the screen. Moving the cursor - Place the pen tip directly on the screen. Fujitsu...
  • Page 37 Energy saving functions of the pen To save energy, the pen automatically switches off after 10 minutes of inactivity and is then in power saving mode. The pen automatically returns to normal operating mode after the next contact with the pen tip. Fujitsu...
  • Page 38 You should also always repeat the calibration if the co-ordination between the pen and cursor movement deteriorates. Operating system Menu Windows To calibrate, go to Settings and search for the keyword Calibrate. You need to calibrate both portrait and landscape formats. Fujitsu...
  • Page 39 You can attach the pen with a pen tether (available as an option) to prevent it being dropped or becoming lost. ► Secure one end of the pen tether to the pen and the other end of the pen tether to the notebook. Fujitsu...

  • Page 40: Using The Device As A Notebook

    ► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu...
  • Page 41 ► Press and hold the left button and, with your finger on the touchpad, drag the item to the desired position. The item will be moved. Switching the Touchpad on and off You can switch the touchpad on and off using the keyboard, see "Key combinations", Page Fujitsu...

  • Page 42: Keyboard

    The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu...
  • Page 43 The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor control Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...

  • Page 44: Virtual Numeric Keypad

    With Windows, the Num Lock function can still be switched on and off using the Num key regardless of whether On or is set in the BIOS. Country and keyboard settings ► Change the country and keyboard settings as described in the documentation for your operating system. Fujitsu...

  • Page 45: Key Combinations

    This key combination switches the touchpad and the touchpad buttons on or off. Fn+F6 Touchpad Touchpadbuttons Touchpad Decrease screen brightness This key combination decreases the brightness of the screen. Fn+F7 LCDscreen Screenbrightness Increase screen brightness This key combination increases the brightness of the screen. Fn+F8 Screenbrightness Fujitsu...
  • Page 46 This key combination moves the cursor back to the previous tab stop. Shift+Tab Backtab Key combinations using the Windows keys are detailed in the manual for your operating system. In addition, the following non-labelled key combinations are supported: • = Pause • = Break • = SysRq Fujitsu...

  • Page 47: Shortcut Button Für Quick Notes For Pen

    Pen.Pressing the shortcut button for long opens the Fujitsu Utility Function Manager. You can also enable the shortcut button when the device is used in the tablet position with the screen folded down. You can activate or deactivate the shortcut button with the Fujitsu Utility Function Manager. Keyboard with backlight Keyboard...

  • Page 48: Camera

    • When using the camera, the notebook support must not shake. • The camera automatically adjusts itself to the current light level. For this reason the LCD display may flicker while the light level is adjusted. Fujitsu...
  • Page 49 Working with the notebook Further information on use of the camera and additional settings can be found in the Help function of the program which uses the camera. Fujitsu...

  • Page 50: Rechargeable Battery

    If you require the maximum battery life for mobile use, we recommend configuring Battery Charge Mode to 100%. You can find Battery Utility in the Windows start menu under Settings - Extras and online at "https://support.ts.fujitsu.com/" Charging, caring for and maintaining the battery Battery Battery The notebook’s rechargeable battery can only be charged when the ambient temperature...

  • Page 51: Switch The Battery Off And On

    ► Use a pointed tool with caution to press the off button for the battery on the underside of the device. The device is currentless. Switch on the battery ► Connect the device to the mains adapter of the notebook or to the Port Replicator. ► Switch the device on again. Fujitsu...

  • Page 52: Using The Power-Management Features

    Windows Performance Power Slider. Windows 11: You can adjust the "Power Mode" after right-clicking on the battery icon in the corresponding menu. • Maximum system performance increases fan noise and reduces battery life. • Maximum battery life limits system performance. Fujitsu...

  • Page 53: Adjusting Fan Control

    "Settings in BIOS Setup Utility", Page With the Fujitsu Utility Function Manager you can also switch between these two settings with Windows. In the Function Manager, select the Fan menu item with the options Quiet Mode (corresponds to Silent) and Normal Mode.

  • Page 54: Memory Cards

    In order to protect your data, always follow the correct procedure for removing the card (see the documentation for your operating system). ► Press on the memory card (1). Memory card The memory card is released and can now be removed. ► Pull the memory card out of the slot (2). Fujitsu...

  • Page 55: Loudspeakers And Microphones

    If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu...

  • Page 56: Sim Card (Configuration Dependent)

    ► Insert the SIM card (3) in the SIM card holder as shown. ► Push the SIM card holder back into the slot (4). ► Close the slot cover (5). ► Switch the battery on again ("Switch the battery off and on", Page 47). Fujitsu...

  • Page 57: Removing The Sim Card

    ► Remove the SIM card from the SIM card holder (3). ► Push the SIM card holder back into the slot (4). ► Close the slot cover (5). ► Switch the battery on again ("Switch the battery off and on", Page 47). Fujitsu...

  • Page 58: Wireless Lan / Bluetooth / Lte Radio Components (Configuration Dependent)

    Working with the notebook Wireless LAN / Bluetooth / LTE radio components (configuration dependent) The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Depending on the device configuration you ordered, your device will be equipped with Wireless LAN, Bluetooth or LTE.

  • Page 59: Access Via Lte (Configuration Dependent)

    LTE module is ready for immediate use. If you did not order an LTE module, you can purchase the accessories for LTE reception from your retailer or your Fujitsu Technology Solutions dealer. For information about connecting with the LTE network, please see the documentation for the hardware that you will be using.

  • Page 60: Ethernet And Lan

    Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Use a shielded network cable (CAT 5e). Fujitsu...

  • Page 61: Your Usb Thunderbolt™ Port Replicator (Optional)

    You need only connect the notebook to the Port Replicator in order to work with your peripheral devices. In addition to the Thunderbolt™ 4 port replicator described here, this system also supports a USB type-C port replicator, which is also connected to the system via the USB type-C connector. Fujitsu...

  • Page 62: Ports On The Thunderbolt™ Port Replicator

    Notebook is not connected or is switched OFF. Charge level indicator Status Charging function is activated for a connected notebook and connected external devices. does not light up There is no charging function, notebook or external devices connected. Fujitsu...

  • Page 63: Setting Up The Port Replicator

    ► Connect the power cable (1) to the power adapter provided for the device, see chapter "Technical data", Page ► Plug the power cable into the mains socket (2). ► Connect the mains adapter cable to the DC jack (DC IN) of the Port Replicator (3). Fujitsu...

  • Page 64: Connecting The Notebook To The Thunderbolt™ Port Replicator

    "Docked" mode. In this profile, for example, the setting is saved as to which monitor was last used for output. This profile will be loaded, as soon as the notebook is connected to a Port Replicator of the same type. Fujitsu...

  • Page 65: Switching On The Notebook Via The Thunderbolt™ Port Replicator

    23). The settings apply both to the ON/OFF switch of the notebook and to the ON/OFF switch of the Port Replicator. Disconnecting the notebook from the Thunderbolt™ Port Replicator ► Disconnect the supplied Thunderbolt cable (USB Type-C) from the Thunderbolt port (USB Type-C) on the notebook. Fujitsu...

  • Page 66: Security Functions

    If you change the Password Severity setting from Strong to Stringent in the Security BIOS Setup Utility menu, the Fujitsu Service Desk can no longer reset the password. In this case, the system can remain permanently unusable.

  • Page 67: Brief Overview Of Security Functions

    Brief overview of security functions Detailed information about the security equipment of your device can be found in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD or on the Internet at "http://www.fujitsu.com/fts/support/index.html". Security functions Type of protection Preparation...

  • Page 68: Setting Up The Fingerprint Sensor (Configuration Dependent)

    ► You must install the fingerprint software in order to be able to use the fingerprint sensor (1). The current AuthConductor Client Basic software for hand vein and fingerprint sensor is available on the Internet at "https://support.ts.fujitsu.com/" After selecting the product and the operating system, you will find the software under Downloads, Applications, Tools and Utilities.

  • Page 69: Configuring The Palm Sensor (Configuration Dependent)

    Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable on the device on your notebook.

  • Page 70: Configuring Password Protection In Bios Setup Utility

    If you change the Password Severity setting from Strong to Stringent in the Security BIOS Setup Utility menu, the Fujitsu Service Desk can no longer reset the password. In this case, the system can remain permanently unusable.
  • Page 71 ► Press the Enter key twice. ► In the Exit menu, select the option Save Changes & Exit. ► Select Yes and press the Enter key. The notebook will now reboot with the password removed. Removing the supervisor password simultaneously deactivates the user password. Fujitsu...

  • Page 72: Password Protection For Booting Of The Operating System

    If a supervisor password has been assigned, a password for the drive can also be set in the Hard Disk Security menu. The drive is protected by this password. Data from this drive can only be read into another system if the correct password has been entered. Fujitsu...

  • Page 73: Smartcard Reader (Configuration Dependent)

    Do not use force when inserting and removing the SmartCard. Make sure that foreign objects do not fall into the SmartCard reader. ► Slide the SmartCard into the SmartCard reader with the chip facing upwards and to the front. Fujitsu...

  • Page 74: Enable Password Entry Using The On-Screen Keyboard

    ► From the UEFI Boot On-Screen Keyboard selection, choose the option Enable or Disable. ► In the Exit menu, choose the option Exit Saving Changes. ► Press the enter key and select Yes. The notebook restarts and the password dialogue is displayed. Tap on the password field to enable the on-screen keyboard. Fujitsu...

  • Page 75: Connecting External Devices

    LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port on the notebook or on the optional Port Replicator. Fujitsu...

  • Page 76: Connecting An External Monitor To The Thunderbolt™ Port Replicator

    ► First switch on the external monitor and then the notebook. You can also switch between the external monitor and the LCD monitor of the notebook, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. Fujitsu...

  • Page 77: Connecting Usb Devices

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...

  • Page 78: Usb Port Intel® Thunderbolt Tm 4 With Charging Function And Display Port (Usb Type-C)

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to the USB port Intel® Thunderbolt 4 with charging function and display port (USB Type-C) of the notebook. Fujitsu...

  • Page 79: Usb Port With Charging Function (Anytime Usb Charge)

    ► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 80: Headphones / Microphone / Line-In / Line-Out / Headset-Combi Port

    If you purchase a cable from a retailer, please note the following information: The headphones/microphone/Line-In/Line-Out/headset-combi port on your notebook is a "3.5 mm jack". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu...

  • Page 81: Removing And Installing Components During Servicing

    Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty. Servicing Components Fujitsu...

  • Page 82: Settings In Bios Setup Utility

    You can use this to start the system, also via other data sources, e.g. via a network. You can also access the BIOS-Setup-Utility from the boot menu with the tab key. Fujitsu...

  • Page 83: Operating The Bios Setup Utility

    ► Select the option that you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (e.g. in this manual). Fujitsu...

  • Page 84: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 85: Erase Disk

    Settings in BIOS Setup Utility Erase Disk Erase Disk is a solution that is integrated into the firmware of the FUJITSU Computer (UEFI: Unified Extensible Firmware Interface), to delete all the data from a hard disk or a solid state drive (SSD) memory module.
  • Page 86 • Reset administrator and user password • Load BIOS setup defaults • Shutdown the Computer • Exit Erase Disk with no additional options upon completion ► Select the function which you require. The deletion process starts. Fujitsu...

  • Page 87: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...

  • Page 88: Executing A Reset

    ► Contact the Service Desk responsible for your country for clarification of the problem: "http://support.ts.fujitsu.com/contact/servicedesk". When you do this, please have ready the ID number and serial number of your system.

  • Page 89: The Notebook's Date Or Time Is Incorrect

    ► Press the key combination to switch the screen output, see "Key combinations", Page The LCD screen is difficult to read LCDscreen LCDscreen Cause Troubleshooting Reflected glare ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen. Fujitsu...

  • Page 90: The External Monitor Remains Blank

    Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu...

  • Page 91: The Cursor Does Not Correctly Follow The Pen Movements

    ► Close the application program or restart malfunction. the notebook (by restarting the operating system or switching the device off and back on again). The battery is dead. ► Connect the notebook to the mains voltage via the mains adapter and charge the battery. Fujitsu...

  • Page 92: The Printer Does Not Print

    The maximum brightness may have been set ► Set the screen slightly darker with the for the screen. key combination for Decreasing the screen brightness in order to reduce the amount of power being drawn. Fujitsu...

  • Page 93: Smartcard Reader Is Not Recognised

    ► If you are working in a network, contact your system administrator, who can boot up your notebook with a Supervisor SmartCard. Acoustic warnings Acoustic error messages Errors Cause Troubleshooting A beep sounds every few seconds. ► Charge the battery. The battery is almost flat. Fujitsu...

  • Page 94: Error Messages On The Screen

    Press to resume, to SETUP ► Press the function key to start the operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating BIOS Setup. system. Fujitsu...

  • Page 95: Restoring The Contents Of The Drive Under Windows

    Restoring the system under Windows If necessary, you can reset your system to the original state of the drive. ► Select Settings from the Start menu. ► Select your System. ► Select Recovery. ► Select Reset this PC. The system will be reset. Fujitsu...

  • Page 96: Technical Data

    Input devices Keyboard 85 keys with backlit keyboard Touchpad 2 keys 2 pen buttons Slots Memory card slot 1 x SD Card SmartCard slot SIM card slot 1 x Nano-SIM (depending on configuration) Ports HDMI port LAN port Socket, RJ45 Fujitsu...
  • Page 97 5 °C ..35 °C / 41 °F ..95 °F Transport temperature (2K2) -10 °C ..60 °C / 5 °F ..140 °F Relative humidity 20 % ... 80 % (no condensation) Operating height up to 3048 m Fujitsu...

  • Page 98: Usb Thunderbolt™ Port Replicator (Optional)

    Depending on the model of the USB Thunderbolt™ Port Replicator, Thunderbolt™ 3 or Thunderbolt™ 4 is supported. Microphone port / Line In / headphones port 3.5 mm stereo mini jack / Line Out LAN port 1 x RJ45 Security Lock Fujitsu...

  • Page 99: Screen Resolutions For Integrated Screen And External Screens

    Rechargeable battery CAUTION! Risk of explosion if the battery is replaced with an incorrect battery type. You will find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/". 4-cell battery 64 Wh Nominal voltage 15.4 V...

  • Page 100: Mains Adaptor (Notebook)

    Rated frequency 50 Hz to 60 Hz (automatic) Max. rated current 2.5 A Secondary Nominal power 170 W Rated voltage 20 V Max. rated current 8.5 A An additional mains adapter or power cable can be ordered at any time. Fujitsu...

  • Page 101: Manufacturer's Notes

    TCO Certified TCOCertified Please note that TCO-certified systems bear the "TCO certified" logo. Further information is given in the "TCO certified" manual appendix at "http://support.ts.fujitsu.com/Manuals/". Electrical safety including ergonomic requirements (GS, depending on the device) Please refer to the associated data sheet to establish whether the model variant of your device has GS certification.

  • Page 102: Index

    Certification markings 97 Fn+F7 41 Cleaning 15 Fn+F8 41 Components Fn+F9 42 installing / removing 77 Fn+space key 42 Configuration, BIOS Setup Utility 78 Connecting audio devices 76 Connecting headphones 76 Ctrl+Alt+Del 42 Getting started 16 Cursor control 39 Fujitsu...
  • Page 103 67 Memory card removing 67 handling 50 Password protection 66 inserting 50 Pen 31 removing 50 Port Replicator Microphone 51 Ports 58 switch off 41 Status indicators 58 switch on 41 Portrait orientation Mobile operation 14 screen 25 Monitor Fujitsu...
  • Page 104 Standby indicator 21 Volume control 51 Status indicator Port Replicator 58 Status indicators 20 Windows key 39 Supervisor password Wireless components changing 67 switch off 41 entering 67 switch on 41 removing 67 Switching on for the first time 19 Fujitsu...
  • Page 105 Index Wireless LAN Wireless LAN: Switching the module off 54 safety notes 13 Switching the module on 54 Fujitsu...

Table of Contents