Related Manuals for AEG A18CS57
Summary of Contents for AEG A18CS57
- Page 1 A18CS57 Original instructions...
- Page 2 mportant! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.
- Page 3 1. Handle, insulated gripping surface 10. Dust pipe joint 2. Switch trigger 11. Lower blade guard lever 3. Lock-off button 12. Blade 4. Front handle 13. Lower blade guard 5. Spindle lock button 14. Hex key 6. Edge guide knob 15.
- Page 4 90°...
- Page 6 Remove the battery pack before starting any work on the machine. click...
- Page 7 75-100 % 50-75 % 25-50 % 0-25 %...
- Page 10 Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade teeth should be visible below the workpiece.
- Page 11 0 - 57 mm...
- Page 12 0° - 50°...
- Page 13 Carry out a test cut 0 - 13 cm 45° 0° y mm x mm...
- Page 14 For safety reasons this power tool is fitted with a switch lock and the On-/Off switch cannot be locked in the „On“ position.
- Page 15 45° 0°...
- Page 16 90° If a correction of the 90° angle of the guide-plate to the saw blade is necessary, use the correction screw. 0°...
- Page 17 90°...
- Page 18 ø 30 mm Accessory can be attached to a dust extraction unit. Always connect the dust pipe joint to the circular saw before using. Always connect the vacuum attachment to a standard vacuum hose.
- Page 19 max. 57 mm > 57 mm...
-
Page 20: Technical Data
When ripping, always use a rip fence or straight edge guide. L1820S This improves the accuracy of cut and reduces the chance of blade Use AEG 18V battery and charger only binding. Always use blades with correct size and shape (diamond versus WARNING! round) of arbour holes. -
Page 21: Lower Guard Function
closing down, the blade stalls and the motor reaction drives Dust may enter the eyes or respiratory system. Wear eye protection at the unit rapidly back toward the operator; all times. Wear appropriate dust control mask with filters suitable for –... -
Page 22: Transporting Lithium Batteries
Use only AEG accessories and AEG spare parts. Should components need to be replaced which have not been described, please contact one of our AEG service agents (see our list of guarantee/service addresses). If needed, an exploded view of the tool can be ordered. Please state the Article No. - Page 24 31 Gilby Road, Mount Waverley, VIC, 3149, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand AEG is a registered trade mark used under license from AB Electrolux (publ) 961096744-01A © 2021 Techtronic Cordless GP.