HP ProCurve J4131A Installation Manual

HP ProCurve High-Speed Transceivers

Installation Guide

Introduction

The HP ProCurve High-Speed Transceivers can be installed into a number

of HP ProCurve networking devices to provide 100 Mbps and 1000 Mbps

connections to other compatible network devices.

This document describes how to install, verify, and troubleshoot the

following HP ProCurve High-Speed Transceivers:

Use these transceivers for the following network connectivity:

I

Gigabit-SX transceiver—1000 Mbps operation over multimode fiber-

optic cable

I

Gigabit-LX transceiver—1000 Mbps operation over either single-

mode or multimode fiber-optic cable

I

100/1000-T transceiver—1000 or 100 Mbps operation over Category

5 or better unshielded twisted-pair (UTP) or shielded twisted-pair

(STP) cables

100-FX SC transceiver—100 Mbps operation over multimode fiber-

I

optic cable

For more information on the cables used with these transceivers and the

supported cable lengths, see page 4.

HP J4131A ProCurve Gigabit-SX Transceiver

HP J4132A ProCurve Gigabit-LX Transceiver

HP J4834A ProCurve 100/1000-T Transceiver

HP J4853A ProCurve 100-FX SC Transceiver

1