Siemens SINUMERIK ONE KB 1500 Equipment Manual

Full cnc keyboards

Quick Links

SINUMERIK
SINUMERIK ONE
Full CNC keyboards: KB 1500 and
KB 1900
Equipment Manual
Valid for:
Control system
SINUMERIK ONE
SINUMERIK 840D sl/840DE sl
09/2022
A5E52185085B AB
Introduction
Fundamental safety
instructions
Description
Operating and display
elements
Interfaces
Dimension drawings
Service and maintenance
Technical specifications
Accessories
1
2
3
4
5
6
7
8
9
Table of Contents
loading

Summary of Contents for Siemens SINUMERIK ONE KB 1500

  • Page 1 Introduction Fundamental safety instructions Description SINUMERIK Operating and display elements SINUMERIK ONE Full CNC keyboards: KB 1500 and Interfaces KB 1900 Dimension drawings Equipment Manual Service and maintenance Technical specifications Accessories Valid for: Control system SINUMERIK ONE SINUMERIK 840D sl/840DE sl 09/2022 A5E52185085B AB...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
  • Page 3: Table Of Contents

    Table of contents Introduction ............................5 About SINUMERIK ........................ 5 About this documentation ....................5 Documentation on the internet .................... 6 1.3.1 Documentation overview SINUMERIK operator components ..........6 Feedback on the technical documentation ................6 mySupport documentation ....................7 Service and Support......................
  • Page 4 Table of contents Full CNC keyboards: KB 1500 and KB 1900 Equipment Manual, 09/2022, A5E52185085B AB...
  • Page 5: Introduction

    – SINUMERIK is the highly dynamic automation solution, integrated for all areas of production. From prototype construction and tool design to mold making, all the way to large-scale series production. Visit our website for more information SINUMERIK (https://www.siemens.com/sinumerik). About this documentation Validity This Equipment Manual handles full CNC keyboards KB 1500 and KB 1900.
  • Page 6: Documentation On The Internet

    This document may contain hyperlinks to third-party websites. Siemens is not responsible for and shall not be liable for these websites and their content. Siemens has no control over the information which appears on these websites and is not responsible for the content and information provided there.
  • Page 7: Mysupport Documentation

    With the "mySupport documentation" web-based system you can compile your own individual documentation based on Siemens content, and adapt it for your own machine documentation. To start the application, click on the "My Documentation" tile on the mySupport homepage (https://support.industry.siemens.com/cs/ww/en/my):...
  • Page 8 Siemens support on the go With the award-winning "Siemens Industry Online Support" app, you can access more than 300,000 documents for Siemens Industry products – any time and from anywhere. The app can support you in areas including: • Resolving problems when implementing a project •...
  • Page 9: Important Product Information

    • OpenSSL (https://www.openssl.org) • Cryptsoft (https://www.cryptsoft.com) Compliance with the General Data Protection Regulation Siemens observes standard data protection principles, in particular the data minimization rules (privacy by design). For this product, this means: The product does not process or store any personal data, only technical function data (e.g. time stamps).
  • Page 10 Introduction 1.7 Important product information Full CNC keyboards: KB 1500 and KB 1900 Equipment Manual, 09/2022, A5E52185085B AB...
  • Page 11: Fundamental Safety Instructions

    Fundamental safety instructions General safety instructions WARNING Electric shock and danger to life due to other energy sources Touching live components can result in death or severe injury. • Only work on electrical devices when you are qualified for this job. •...
  • Page 12 Fundamental safety instructions 2.1 General safety instructions WARNING Electric shock due to equipment damage Improper handling may cause damage to equipment. For damaged devices, hazardous voltages can be present at the enclosure or at exposed components; if touched, this can result in death or severe injury.
  • Page 13 • Therefore, if you move closer than 20 cm to the components, be sure to switch off radio devices, cellphones or WLAN devices. • Use the "SIEMENS Industry Online Support app" only on equipment that has already been switched off.
  • Page 14 Fundamental safety instructions 2.1 General safety instructions NOTICE Overheating due to inadmissible mounting position The device may overheat and therefore be damaged if mounted in an inadmissible position. • Only operate the device in admissible mounting positions. WARNING Unexpected movement of machines caused by inactive safety functions Inactive or non-adapted safety functions can trigger unexpected machine movements that may result in serious injury or death.
  • Page 15: Equipment Damage Due To Electric Fields Or Electrostatic Discharge

    Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement –...
  • Page 16 Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber...
  • Page 17: Residual Risks Of Power Drive Systems

    Fundamental safety instructions 2.5 Residual risks of power drive systems Residual risks of power drive systems When assessing the machine- or system-related risk in accordance with the respective local regulations (e.g., EC Machinery Directive), the machine manufacturer or system installer must take into account the following residual risks emanating from the control and drive components of a drive system: 1.
  • Page 18 Fundamental safety instructions 2.5 Residual risks of power drive systems Full CNC keyboards: KB 1500 and KB 1900 Equipment Manual, 09/2022, A5E52185085B AB...
  • Page 19: Description

    Description SINUMERIK full CNC keyboards KB 1500 and KB 1900 facilitate user-friendly input of programs and text. It is fitted with short-stroke keys. The key layout is predefined and cannot be modified, i.e. the key covers cannot be transposed. The keyboard is secured from the rear using special clamps supplied with the panel. Validity The following description applies to the components: Designation...
  • Page 20 Description Full CNC keyboards: KB 1500 and KB 1900 Equipment Manual, 09/2022, A5E52185085B AB...
  • Page 21: Operating And Display Elements

    Operating and display elements Key assignments ① KB 1500 ② KB 1900 Figure 4-1 Key layout of full CNC keyboards KB 1500 and KB 1900 Note that the following keys on the KB 1500/ 1900 always correspond to the left-hand keys on the standard keyboard: Shift, Ctrl, Alt The key functions of the SINUMERIK keyboard depend on the used operating software and...
  • Page 22 Operating and display elements Full CNC keyboards: KB 1500 and KB 1900 Equipment Manual, 09/2022, A5E52185085B AB...
  • Page 23: Interfaces

    Interfaces ① USB upstream port X125 ② Protective conductor connection, threaded bolts M5 Figure 5-1 Rear side, diagram showing the KB 1900 as example The protective conductor connection must be in compliance with national regulations. As a minimum, the cross-section required is the cross-section of the line feeder cable of the assigned devices.
  • Page 24 Interfaces Full CNC keyboards: KB 1500 and KB 1900 Equipment Manual, 09/2022, A5E52185085B AB...
  • Page 25: Dimension Drawings

    Dimension drawings Dimension drawings KB 1500 Dimension drawing Device mounting depth without taking into account the mounting clamps. As a result of the clamps, the mounting depth can increase depending on the mounting plate thickness. Mounting the panel with clamping elements provided in the device accessory pack at the openings provided in the frame Figure 6-1 Dimension drawing for installing the full CNC keyboard KB 1500...
  • Page 26 Dimension drawings 6.1 Dimension drawings KB 1500 Panel cutout ① All corner radii R5 or 5x45° chamfer Figure 6-2 Panel cutout for full CNC keyboard KB 1500 (sheet metal thickness 1.5 - 6.0 mm) Full CNC keyboards: KB 1500 and KB 1900 Equipment Manual, 09/2022, A5E52185085B AB...
  • Page 27: Dimension Drawings Kb 1900

    Dimension drawings 6.2 Dimension drawings KB 1900 Dimension drawings KB 1900 Dimension drawing Device mounting depth without taking into account the mounting clamps. As a result of the clamps, the mounting depth can increase depending on the mounting plate thickness. Mounting the panel with clamping elements provided in the device accessory pack at the openings provided in the frame Figure 6-3...
  • Page 28 Dimension drawings 6.2 Dimension drawings KB 1900 Panel cutout ① All corner radii R5 or 5x45° chamfer Figure 6-4 Panel cutout for full CNC keyboard KB 1900 (sheet metal thickness 1.5 - 6.0 mm) Full CNC keyboards: KB 1500 and KB 1900 Equipment Manual, 09/2022, A5E52185085B AB...
  • Page 29: Service And Maintenance

    Service and maintenance Cleaning the device Use a soft cloth moistened either with water or a mild cleaning agent to clean the housing and operator controls of the device. Note Switch the device off for cleaning Clean the device only when it is switched off. This way, you ensure that you cannot unintentionally trigger any functions by touching the keys.
  • Page 30 Service and maintenance Suspected malfunction If you suspect a malfunction due to unusual product reactions, isolate the device from power. Immediately inform qualified personnel to check the function and ensure that the product functions correctly. The following signs can indicate a malfunction: •...
  • Page 31: Technical Specifications

    Technical specifications KB 1500 KB 1900 Safety Protective class according to EN 50178 III; PELV Degree of protection according to EN Front: IP 65 60529 Rear: IP00 Approvals CE / UL / EAC Flame resistance UL 94 V-1 UL identifier MCPS2103-398135E-064000 MCPS2104-464135E-064000 0AA0...
  • Page 32: Emf Assessments For 24 V Components

    Technical specifications 8.2 Standards and approvals KB 1500 KB 1900 Classification of the mechanical environ‐ Class 3M2 according to EN 60721-3-3 ment Vibratory load during operation Frequency range: 10 – 200 Hz Deflection at 9 – 18 Hz: 1.5 mm Acceleration at 18 –...
  • Page 33: Recycling And Disposal

    The products comply with the China RoHs regulation. Further information can be found on the Internet at the following link: SIOS (https:// support.industry.siemens.com/cs/document/109773373/ccc-fm?dti=0&lc=en-US) Recycling and disposal For environmentally friendly recycling and disposal of your old equipment, please contact a company certified for the disposal of waste electrical and electronic equipment and dispose of the equipment in accordance with the regulations in your country.
  • Page 34 Technical specifications 8.3 Recycling and disposal Full CNC keyboards: KB 1500 and KB 1900 Equipment Manual, 09/2022, A5E52185085B AB...
  • Page 35: Accessories

    Accessories Set of tension jacks Component Description Quanti‐ Article number Set of tension jacks For supplementary operator com‐ Set of 9 6FC5248-0AF14-0AA0 ponents with 2.5 mm profile, length: 20 mm Full CNC keyboards: KB 1500 and KB 1900 Equipment Manual, 09/2022, A5E52185085B AB...
  • Page 36 Accessories Full CNC keyboards: KB 1500 and KB 1900 Equipment Manual, 09/2022, A5E52185085B AB...
  • Page 37: Index

    Index " "Siemens Industry Online Support" app, 8 Websites of third-party companies, 6 Care, 29 Cleaning agent, 29 Data matrix code, 9 General Data Protection Regulation, 9 Maintenance, 29 mySupport documentation, 7 OpenSSL, 9 Product support, 7 Scope of maintenance, 29...
  • Page 38 Index Full CNC keyboards: KB 1500 and KB 1900 Equipment Manual, 09/2022, A5E52185085B AB...

This manual is also suitable for:

Sinumerik one kb 1900

Table of Contents