D-Link DIR-822 User Manual

D-Link DIR-822 User Manual

Ac1200 wave 2 mu-mimo wi-fi easymesh router
Hide thumbs Also See for DIR-822:
Table of Contents
User Manual
DIR-822
AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router
July 2021
Table of Contents
loading

Summary of Contents for D-Link DIR-822

  • Page 1 User Manual DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router July 2021...
  • Page 2: Table Of Contents

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router User Manual Contents Chapter 1. Introduction.........5 Contents and Audience............5 Conventions..............5 Document Structure............5 Chapter 2. Overview..........6 General Information............6 Specifications..............8 Product Appearance............14 Upper Panel..............14 Back and Bottom Panels...........16 Delivery Package............18 Chapter 3. Installation and Connection......19 Before You Begin............19...
  • Page 3 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router User Manual Statistics..............71 Network Statistics............71 DHCP..............72 Routing..............73 Clients and Sessions.............75 Port Statistics............76 Multicast Groups............77 IPsec Statistics............78 Connections Setup............79 WAN..............79 Creating Dynamic IPv4 or Static IPv4 WAN Connection....81 Creating Dynamic IPv6 or Static IPv6 WAN Connection....84 Creating PPPoE WAN Connection..........87...
  • Page 4 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router User Manual Firewall..............178 IP Filter...............178 Virtual Servers............183 DMZ..............187 MAC Filter..............189 URL Filter..............191 AdBlock..............194 Remote Access............195 System..............197 Configuration............198 Firmware Update............200 Local Update............202 Remote Update............203 Schedule..............204 Log..............208 Ping..............211 Traceroute..............213 Telnet/SSH..............215 System Time.............216 Auto Provision............219 Yandex.DNS..............221...
  • Page 5: Chapter 1. Introduction

    Chapter 2 gives an overview of the router's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the router DIR-822 and configure a PC in order to access its web- based interface.
  • Page 6: Chapter 2. Overview

    You are able to connect the wireless router DIR-822 to a cable or DSL modem or to a private Ethernet line and use a high-speed Internet connection to successfully fulfill a wide range of professional tasks.
  • Page 7 (the interface is available in two languages – in Russian and in English). The configuration wizard allows you to quickly switch DIR-822 to one of the following modes: router (for connection to a wired or wireless ISP), access point, repeater, or client, and then configure all needed setting for operation in the selected mode in several simple steps.
  • Page 8: Specifications

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Overview User Manual Specifications Hardware Processor · RTL8197FH-VG5 (1GHz) · 128MB, DDR2, built in processor Flash · 128MB, SPI NAND Interfaces · 10/100BASE-TX WAN port · 4 10/100BASE-TX LAN ports LEDs ·...
  • Page 9 Bilingual web-based interface configuration management (Russian/English) · Support of D-Link Assistant application for Android and iPhone smartphones · Notification on connection problems and auto redirect to settings · Firmware update via web-based interface · Automatic notification on new firmware version ·...
  • Page 10 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Overview User Manual Wireless Module Parameters Standards · IEEE 802.11ac Wave 2 · IEEE 802.11a/b/g/n · IEEE 802.11k/v · IEEE 802.11w Frequency range · 2400 ~ 2483.5MHz · 5150 ~ 5350MHz The frequency range depends upon the ·...
  • Page 11 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Overview User Manual Wireless Module Parameters Transmitter output power · 802.11a (typical at room temperature 25 °C) 14dBm at 6, 9, 12, 18, 24Mbps 13dBm at 36Mbps The maximum value of the transmitter 12.5dBm at 48Mbps...
  • Page 12 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Overview User Manual Wireless Module Parameters · 802.11g (typical at PER < 10% (1000-byte PDUs) at room temperature 25 °C) -82dBm at 6Mbps -81dBm at 9Mbps -79dBm at 12Mbps -77dBm at 18Mbps...
  • Page 13 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Overview User Manual Wireless Module Parameters VHT40 -79dBm at MCS0 -76dBm at MCS1 -74dBm at MCS2 -71dBm at MCS3 -67dBm at MCS4 -63dBm at MCS5 -62dBm at MCS6 -61dBm at MCS7 -56dBm at MCS8...
  • Page 14: Product Appearance

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Overview User Manual Product Appearance Upper Panel Figure 1. Upper panel view. Mode Description The router is powered on. Solid green Power The router is powered off. No light The WAN cable is connected to the port.
  • Page 15 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Overview User Manual Mode Description A device (computer) is connected to the relevant port, Solid green the connection is on. Data transfer through the relevant LAN port. When the router is being loaded, the LEDs are blinking LAN 1-4 one at a time.
  • Page 16: Back And Bottom Panels

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Overview User Manual Back and Bottom Panels Figure 2. Back panel view. Port Description A button to enable/disable wireless network. To disable the router's wireless network: with the device turned on, WIFI press the button and release.
  • Page 17 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Overview User Manual Also, the power connector is located on the back panel of the router. The RESET button located on the bottom panel of the router is designed to restore the factory default settings.
  • Page 18: Delivery Package

    • “Quick Installation Guide” (brochure). • The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
  • Page 19: Chapter 3. Installation And Connection

    Please, read this manual prior to installing the device. Make sure that you have all the necessary information and equipment. Computer or Mobile Device Configuration of the wireless dual band router with a built-in 4-port switch DIR-822 (hereinafter referred to as “the router”) is performed via the built-in web-based interface. The web-based interface is available from any operating system that supports a web browser.
  • Page 20: Connecting To Pc

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual Connecting to PC PC with Ethernet Adapter 1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
  • Page 21: Obtaining Ip Address Automatically (Os Windows 7)

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual Obtaining IP Address Automatically (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
  • Page 22 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line. Figure 4. The Network and Sharing Center window. Page 22 of 235...
  • Page 23 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed. Figure 5. The Network Connections window.
  • Page 24 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button. Figure 6. The Local Area Connection Properties window.
  • Page 25 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
  • Page 26: Obtaining Ip Address Automatically (Os Windows 10)

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual Obtaining IP Address Automatically (OS Windows 10) 1. Click the Start button and proceed to the Settings window. 2. Select the Network & Internet section. Figure 8. The Windows Settings window.
  • Page 27 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual 3. In the Change your network settings section, select the Change adapter options line. Figure 9. The Network & Internet window. Page 27 of 235...
  • Page 28 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed. Figure 10. The Network Connections window.
  • Page 29 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
  • Page 30: Pc With Wi-Fi Adapter

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual PC with Wi-Fi Adapter 1. Connect the power cord to the power connector port on the back panel of the router, then plug the power adapter into an electrical outlet or power strip.
  • Page 31: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 7)

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual Obtaining IP Address Automatically and Connecting to Wireless Network (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
  • Page 32 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
  • Page 33 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DIR-822 (for operating in the 2.4GHz band) or DIR-822-5G (for operating in the 5GHz band) and click the Connect button. Figure 16. The list of available networks.
  • Page 34: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 10)

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual Obtaining IP Address Automatically and Connecting to Wireless Network (OS Windows 10) 1. Click the Start button and proceed to the Settings window. 2. Select the Network & Internet section.
  • Page 35 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
  • Page 36 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DIR- 822 (for operating in the 2.4GHz band) or DIR-822-5G (for operating in the 5GHz band) and click the Connect button. Figure 20. The list of available networks.
  • Page 37: Connecting To Web-Based Interface

    (create a WAN connection, change the parameters of the wireless network, specify the settings of the firewall, etc.). For security reasons, DIR-822 with default settings cannot connect to the Internet. To get started, please set your own password used to access the web-based interface and, if needed, configure other settings recommended by your ISP.
  • Page 38 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.
  • Page 39: Web-Based Interface Structure

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual Web-based Interface Structure Summary Page On the Summary page, detailed information on the device state is displayed. Figure 25. The summary page. Page 39 of 235...
  • Page 40 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual The Device Information section displays the model and hardware version of the router, the firmware version, and other data. To contact the technical support group (to send an e-mail), left-click the support e-mail address.
  • Page 41: Home Page

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual Home Page The Home page displays links to the most frequently used pages with device's settings. Figure 26. The Home page. Other settings of the router are available in the menu in the left part of the page.
  • Page 42: Menu Sections

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual Menu Sections To configure the router use the menu in the left part of the page. In the Initial Configuration section you can run the Initial Configuration Wizard. The Wizard...
  • Page 43: Notifications

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Installation and Connection User Manual Notifications The router's web-based interface displays notifications in the top right part of the page. Figure 27. The web-based interface notifications. Click the icon displaying the number of notifications to view the complete list and click the relevant button.
  • Page 44: Chapter 4. Configuring Via Web-Based Interface

    If you perform initial configuration of the router via Wi-Fi connection, please make sure that you are connected to the wireless network of DIR-822 (see the WLAN name (SSID) on the barcode label on the bottom panel of the device) and click the NEXT button.
  • Page 45 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual On the opened page, click YES in order to leave the current language of the web-based interface or click NO to select the other language. Figure 31. Selecting a language.
  • Page 46: Selecting Operation Mode

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Selecting Operation Mode Select the needed operation mode and click the NEXT button. Router In order to connect your device to a wired ISP, on the Device mode page, from the Connection method list, select the Autonomous value.
  • Page 47: Access Point Or Repeater

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Access Point or Repeater In order to connect your device to a wired router for adding a wireless network to the existing local network, on the Device mode page, from the Connection method list, select the Autonomous value.
  • Page 48 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In order to let wired PCs connected to your device access the network of a wireless router, on the Device mode page, from the Connection method list, select the Autonomous value. Then from the Work mode list select the Client value.
  • Page 49: Mesh Network Main Device (Controller)

    User Manual Mesh Network Main Device (Controller) In order to configure DIR-822 as a main device of your mesh network, from the Connection method list, select the EasyMesh value. Then from the Device role list, select the Controller value. From the Backhaul band list, select the band where your mesh network operates.
  • Page 50 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In order to connect your main device to a wireless ISP (WISP), from the Work mode list, select the WISP Repeater value. In this mode you can connect your device to another access point, configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and...
  • Page 51: Mesh Network Subordinate Device (Agent)

    User Manual Mesh Network Subordinate Device (Agent) In order to configure DIR-822 as a subordinate device of your mesh network, from the Connection method list, select the EasyMesh value. Then from the Device role list, select the Agent value. From the Backhaul band list, select the band where your main device (in the Controller role) operates.
  • Page 52: Changing Lan Ipv4 Address

    If you want to manually assign the LAN IPv4 address for DIR-822, do not select the Automatic obtainment of IPv4 address checkbox and fill in the IP address, Subnet mask, DNS IP address, Hostname fields and, if needed, the Gateway IP address field.
  • Page 53: Wi-Fi Client

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Wi-Fi Client This configuration step is available for the WISP Repeater, Repeater, and Client modes. 1. On the Wi-Fi Сlient page, click the WIRELESS NETWORKS button and select the network to which you want to connect in the opened window.
  • Page 54 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Encryption key WEP as Select the checkbox to set a hexadecimal number as a key for encryption. Keys for WEP encryption. The router uses the key selected from the Encryption key Default key ID drop-down list.
  • Page 55: Configuring Wan Connection

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Configuring WAN Connection This configuration step is available for the Router and WISP Repeater modes. You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP).
  • Page 56: Static Ipv4 Connection

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Static IPv4 Connection Figure 43. The page for configuring Static IPv4 WAN connection. Fill in the following fields: IP address, Subnet mask, Gateway IP address, and DNS IP address.
  • Page 57: Static Ipv6 Connection

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Static IPv6 Connection Figure 44. The page for configuring Static IPv6 WAN connection. Fill in the following fields: IP address, Prefix, Gateway IP address, and DNS IP address.
  • Page 58: Pppoe, Ipv6 Pppoe, Pppoe Dual Stack, Pppoe + Dynamic Ip (Pppoe Dual Access) Connections

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual PPPoE, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access) Connections Figure 45. The page for configuring PPPoE WAN connection. In the Username field enter the login and in the Password field enter the password provided your ISP.
  • Page 59: Pppoe + Static Ip (Pppoe Dual Access) Connection

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual PPPoE + Static IP (PPPoE Dual Access) Connection Figure 46. The page for configuring PPPoE + Static IP (PPPoE Dual Access) WAN connection. In the Username field enter the login and in the Password field enter the password provided your ISP.
  • Page 60: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 47. The page for configuring PPTP + Dynamic IP WAN connection. In the Username field enter the login and in the Password field enter the password provided by your ISP.
  • Page 61: Pptp + Static Ip Or L2Tp + Static Ip Connection

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual PPTP + Static IP or L2TP + Static IP Connection Figure 48. The page for configuring PPTP + Static IP WAN connection. In the Username field enter the login and in the Password field enter the password provided by your ISP.
  • Page 62: Configuring Wireless Network

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Configuring Wireless Network This configuration step is available for the Router, Access point, WISP Repeater, and Repeater modes. 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network in the 2.4GHz band or leave the value suggested by the...
  • Page 63 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual 5. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz band, select the Enable guest network checkbox (available for the Router and WISP Repeater modes only).
  • Page 64: Configuring Lan Ports For Iptv/Voip

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Configuring LAN Ports for IPTV/VoIP This configuration step is available for the Router mode. On the IPTV page, select the Is an STB connected to the device checkbox.
  • Page 65 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual On the VoIP page, select the Is an IP phone connected to the device checkbox. Figure 52. The page for selecting a LAN port to connect an VoIP phone.
  • Page 66: Changing Web-Based Interface Password

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Changing Web-based Interface Password On this page, you should change the default administrator password. To do this, enter a new password in the User’s interface password and Password confirmation fields. You may set any password except admin.
  • Page 67 If problems of connection have not been solved, contact the technical support of your ISP (as a rule, the technical support phone is provided with the agreement) or the D-Link technical support (the phone number will be displayed on the page after several attempts of checking the connection).
  • Page 68: Connection Of Multimedia Devices

    IPTV set-top box or IP phone. Contact your ISP to clarify if you need to configure DIR-822 in order to use these devices. To start the Wizard, on the Home page, select the Connection of Multimedia Devices section.
  • Page 69 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual If you need to configure a connection via VLAN, click the ADVANCED MODE button. Figure 56. The Multimedia Devices Connection Wizard. The advanced mode. In the WAN section, click the Add icon Figure 57.
  • Page 70 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual The selected port cannot use the default connection to access the Internet. To deselect the port in the simplified mode, left-click the selected element (the frame will disappear) and click the APPLY button.
  • Page 71: Statistics

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Statistics The pages of this section display data on the current state of the router: network statistics • IP addresses leased by the DHCP server •...
  • Page 72: Dhcp

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual DHCP The Statistics / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device.
  • Page 73: Routing

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Routing The Statistics / Routing page displays the routing rules and routing tables. Figure 60. The Statistics / Routing page. The Rules section displays routing rules, their corresponding routing tables, incoming and outgoing interfaces, priority levels, and other data.
  • Page 74 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 61. The routing table page. The opened page displays the information on routes in the selected routing table. The table contains destination IP addresses, gateways, subnet masks, and other data.
  • Page 75: Clients And Sessions

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Clients and Sessions On the Statistics / Clients and Sessions page, you can view the list of devices connected to the local network of the router and information on current sessions of each device.
  • Page 76: Port Statistics

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Port Statistics On the Statistics / Port Statistics page, you can view statistics for traffic passing through ports of the router. The information shown on the page can be used for diagnosing connection problems.
  • Page 77: Multicast Groups

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Multicast Groups The Statistics / Multicast Groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.
  • Page 78: Ipsec Statistics

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual IPsec Statistics On the Statistics / IPsec Statistics page, you can view statistics for IPsec tunnels of the router. For each tunnel the following data are displayed: name and state (when the connection is on, its...
  • Page 79: Connections Setup

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Connections Setup In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection). On the Connections Setup / WAN page, you can create and edit connections used by the router.
  • Page 80 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 67. The Connections Setup / WAN page. The advanced mode. To create a new connection, click the ADD button ( ) in the Connections List section. Upon that the connection creation page opens.
  • Page 81: Creating Dynamic Ipv4 Or Static Ipv4 Wan Connection

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Creating Dynamic IPv4 or Static IPv4 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 82 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 69. The page for creating a new Static IPv4 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
  • Page 83 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 70. The page for creating a new Static IPv4 connection. The IPv4 section. Parameter Description IPv4 For Static IPv4 type IP address Enter an IP address for this WAN connection.
  • Page 84: Creating Dynamic Ipv6 Or Static Ipv6 Wan Connection

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Creating Dynamic IPv6 or Static IPv6 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 85 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 72. The page for creating a new Static IPv6 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
  • Page 86 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description IPv6 For Static IPv6 type IPv6 address Enter an IPv6 address for this WAN connection. Prefix The length of the subnet prefix. The value 64 is used usually.
  • Page 87: Creating Pppoe Wan Connection

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Creating PPPoE WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 88 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 75. The page for creating a new PPPoE connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
  • Page 89 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 76. The page for creating a new PPPoE connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
  • Page 90 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied. • MPPE 40 128 bit: MPPE encryption with a 40-bit or 128-bit •...
  • Page 91 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 77. The page for creating a new PPPoE connection. The IPv4 section. Parameter Description Obtain DNS server Move the switch to the right to configure automatic assignment of addresses DNS server addresses.
  • Page 92: Creating Pptp, L2Tp, Or L2Tp Over Ipsec Wan Connection

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Creating PPTP, L2TP, or L2TP over IPsec WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 93 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 79. The page for creating a new PPTP connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
  • Page 94 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied. • MPPE 40 128 bit: MPPE encryption with a 40-bit or 128- •...
  • Page 95 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 80. The page for creating a new PPTP connection. The IPv4 section. Parameter Description Obtain DNS server Move the switch to the right to configure automatic assignment of addresses DNS server addresses.
  • Page 96 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual After clicking the button, the window for additional configuration of the connection opens. If you want to use this WAN connection to access the Internet, select the to the Internet choice of the radio button.
  • Page 97: Creating Pppoe Ipv6 Or Pppoe Dual Stack Wan Connection

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 98 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 83. The page for creating a new PPPoE IPv6 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
  • Page 99 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 84. The page for creating a new PPPoE IPv6 connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
  • Page 100 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied. • MPPE 40 128 bit: MPPE encryption with a 40-bit or 128-bit •...
  • Page 101 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 85. The page for creating a new PPPoE Dual Stack connection. The IPv4 section. Parameter Description IPv4 (for the PPPoE Dual Stack type) Obtain DNS server Move the switch to the right to configure automatic assignment of DNS server addresses.
  • Page 102 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Primary IPv6 DNS Enter addresses of the primary and secondary IPv6 DNS servers in server / Secondary the relevant fields. IPv6 DNS server When all needed settings are configured, click the APPLY button.
  • Page 103: Lan

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To configure the router's local interface, go to the Connections Setup / LAN page. IPv4 Go to the IPv4 tab to change the IPv4 address of the router, configure the built-in DHCP server, specify MAC address and IPv4 address pairs, or add own DNS records.
  • Page 104 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Available if the Access point, Repeater, or Client mode was selected in the Initial Configuration Wizard. Gateway IP address The gateway IPv4 address which is used by the router to connect to the Internet (e.g., for synchronizing the system time with an NTP...
  • Page 105 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Relay: An external DHCP server is used to assign IP • addresses to clients. When this value is selected, the External DHCP server IP, Option 82 Circuit ID, Option 82 Remote ID, and Option 82 Subscriber ID fields are displayed on the tab.
  • Page 106 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the DHCP Options section, you can change default values for some options of DHCP protocol (IP address, subnet mask, DNS servers) or specify additional parameters which the built-in DHCP server should send to clients to configure the local network.
  • Page 107 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 91. Configuring the local interface. The IPv4 tab. The window for adding a DNS record. In the IP address field, specify a host from the internal or external network. You can choose a device connected to the router's LAN at the moment.
  • Page 108: Ipv6

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual IPv6 Go to the IPv6 tab to change or add the IPv6 address of the router, configure IPv6 addresses assignment settings, specify MAC address and IPv6 address pairs, or add own DNS records.
  • Page 109 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the Dynamic IPv6 Addresses section, you can configure IPv6 addresses assignment settings. Figure 94. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
  • Page 110 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual If needed, you can add your own address resource records. To do this, click the ADD button ( in the Hosts section (available if the Router or WISP Repeater mode was selected in the Initial Configuration Wizard).
  • Page 111: Wan Failover

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual WAN Failover On the Connections Setup / WAN Failover page, you can enable the WAN backup function, which provides you with uninterrupted access to the Internet. When your main connection breaks down, the router activates the backup connection;...
  • Page 112 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the Connections IPv4 section, the existing IPv4 connections are displayed in order of their priority. The first connection on the list serves as the main connection, the others are backup connections.
  • Page 113 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the Check with ping section, specify settings of checking the connection using ICMP ping mechanism. Parameter Description Check with ping A time period (in seconds) between regular checks of the hosts’...
  • Page 114: Wi-Fi

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network. Basic Settings In the Wi-Fi / Basic Settings section, you can change basic parameters for the wireless interface of the router and configure the basic and additional wireless networks.
  • Page 115 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the Basic Settings section, the following parameters are available: Parameter Description To enable Wi-Fi connection, move the switch to the right. To disable Wi-Fi connection, move the switch to the left.
  • Page 116 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description The wireless channel number. To select a channel manually, left-click; in the opened window, select a channel and click the SAVE button. The action is available,...
  • Page 117 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 99. Creating a wireless network. Page 117 of 235...
  • Page 118 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Wi-Fi Network Network name (SSID) A name for the wireless network. If the switch is moved to the right, other users cannot see your Wi-Fi Hide SSID network.
  • Page 119 Parameter Description If the wireless network broadcasting is disabled, devices cannot connect to the wireless network. Upon that DIR-822 can connect to another access point as a wireless client. To enable/disable broadcasting on a schedule, click the Set schedule icon ( ).
  • Page 120 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the Security Settings section, you can change security settings of the wireless network. By default, the WPA2-PSK network authentication type of both bands of the wireless network is specified.
  • Page 121 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual The WPA , WPA2 , and WPA/WPA2 mixed authentication types require a RADIUS server. When the Open or WEP value is selected, the following settings are displayed on the page (unavailable for the wireless network operating modes which support the standard 802.11n or...
  • Page 122 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual When the WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK mixed, WPA3-SAE, or WPA2- PSK/WPA3-SAE mixed value is selected, the following fields are displayed on the page: Figure 102. The WPA2-PSK value is selected from the Network authentication drop-down list.
  • Page 123 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description For WPA2-PSK, WPA3-SAE, and WPA2-PSK/WPA3-SAE mixed authentication types only. Protected Management Frames help to improve packet privacy protection for wireless data transmission. Select a value for the wireless network from the drop-down list.
  • Page 124 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description RADIUS server port A port of the RADIUS server. The password which the router uses for communication with the RADIUS encryption key RADIUS server (the value of this parameter is specified in the RADIUS server settings).
  • Page 125: Client Management

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Client Management On the Wi-Fi / Client Management page, you can view the list of wireless clients connected to the router. Figure 104. The page for managing the wireless clients.
  • Page 126: Wps

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a method for connection to the WLAN. The WPS function helps to configure the protected wireless network automatically. Devices connecting to the wireless network via the WPS function must support the WPS function.
  • Page 127 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To activate the WPS function via the web-based interface, on the tab of the relevant band, click the ENABLE WPS button. When the WPS function is enabled, the Information section is available on the page.
  • Page 128: Using Wps Function Via Web-Based Interface

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Using WPS Function via Web-based Interface To connect to the basic wireless network via the PIN method of the WPS function, follow the next steps: 1. Click the ENABLE WPS button.
  • Page 129: Using Wps Function Without Web-Based Interface

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Using WPS Function without Web-based Interface You can use the WPS function without accessing the web-based interface of the router. To do this, you need to configure the following router's settings: 1.
  • Page 130: Wmm

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. To configure the 2.4GHz band or 5GHz band, go to the relevant tab.
  • Page 131 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To edit the parameters of an Access Category, left-click the relevant line. In the opened window, change the needed parameters. Figure 107. The window for changing parameters of the WMM function.
  • Page 132 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Acknowledgment. Answering response requests while transmitting. Displayed only in the Access Point section. If the switch is moved to the left, the router answers requests.
  • Page 133: Client

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point or to a WISP. To configure the 2.4GHz band or 5GHz band, go to the relevant tab.
  • Page 134 When you have configured the parameters, click the APPLY button. When connecting to a wireless access point, the wireless channel of DIR-822 will switch to the channel of the access point to which you have connected. In addition, the Connection Information section in which you can view the connection status and the network basic parameters is displayed.
  • Page 135: Client Shaping

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Client Shaping On the Wi-Fi / Client Shaping page, you can limit the maximum bandwidth of upstream and downstream traffic for each wireless client of the router by its MAC address.
  • Page 136 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Frequency band From the drop-down list, select a band of the wireless network. A wireless network to which the rule will be applied. Select the SSID needed value from the drop-down list.
  • Page 137: Additional

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Additional On page of the Wi-Fi / Additional section, you can define additional parameters for the WLAN of the router. To configure the 2.4GHz band or 5GHz band, go to the relevant tab.
  • Page 138 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual The following fields are available on the page: Parameter Description The channel bandwidth for 802.11n standard in the 2.4GHz band (the 2.4 GHz tab). 20 MHz: 802.11n clients operate at 20MHz channels.
  • Page 139 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to disable multicasting for the router's WLAN. Move the switch to the left to enable multicasting from the Drop multicast WAN connection selected on the Advanced / IGMP/MLD page.
  • Page 140 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Guard interval (in nanoseconds). This parameter defines the interval between symbols transmitted when the router is communicating to wireless devices. Enable: The router uses the 400 ns short guard interval.
  • Page 141: Mac Filter

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual MAC Filter On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
  • Page 142 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 113. The window for adding a rule for the MAC filter. You can specify the following parameters: Parameter Description Frequency band From the drop-down list, select a band of the wireless network.
  • Page 143 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual After creating the rules you need to configure the filtering modes. To open the basic or additional wireless network for the devices which MAC addresses are specified on this page and to close the wireless network for all other devices, in the section corresponding to the band (2.4 GHz or 5 GHz), left-click the line of the wireless network.
  • Page 144: Easymesh

    Device role The current role of the device in the mesh network. 5 At present, you can connect up to 6 D-Link devices with EasyMesh support: 1 in the Controller role and 5 in the Agent role. Page 144 of 235...
  • Page 145: Connecting Subordinate Devices With Ethernet Cable

    When you have configured the parameters, click the APPLY button. To configure DIR-822 as the main or subordinate device of the mesh network, go to the Setup Wizard section (see the Initial Configuration Wizard section, page 44), from the Connection method list, select the EasyMesh value.
  • Page 146: Connecting Subordinate Devices Via Web-Based Interface

    Do not press the button on more than two devices simultaneously. 2. The DIR-822 WPS LED should start blinking. Wait for about 4 minutes for the subordinate device to receive all mesh network settings and web-based interface password from the main device.
  • Page 147: Advanced

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Advanced In this menu you can configure advanced settings of the router: create or edit VLANs • add name servers • configure a DDNS service •...
  • Page 148: Vlan

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual VLAN On the Advanced / VLAN page, you can edit existing and create new virtual networks (VLAN), e.g., for distinguishing traffic or specifying additional WAN interfaces.
  • Page 149 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To create a new VLAN, click the ADD button ( Figure 117. The page for adding a VLAN. You can specify the following parameters: Parameter Description Name A name for the VLAN for easier identification.
  • Page 150 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Select a type for each port included in the VLAN. Untagged: Untagged traffic will be transmitted through the • specified port. Tagged: Tagged traffic will be transmitted through the •...
  • Page 151: Dns

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual On the Advanced / DNS page, you can add DNS servers to the system. Figure 118. The Advanced / DNS page. DNS servers are used to determine the IP address from the name of a server in Intranets or the Internet (as a rule, they are specified by an ISP or assigned by a network administrator).
  • Page 152 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual You can specify the addresses of DNS servers manually on this page or configure the router to obtain DNS servers addresses automatically from your ISP upon installing a connection. Also here you can specify addresses of reserve DNS servers which the router can use if the addresses specified manually or obtained automatically are unavailable.
  • Page 153: Ddns

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses. Figure 119. The Advanced / DDNS page.
  • Page 154 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual On the opened page, you can specify the following parameters: Parameter Description Move the switch to the right to enable DDNS. Enable Move the switch to the left to disable DDNS.
  • Page 155: Ports Settings

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Ports Settings On the Advanced / Ports Settings page, you can configure or disable autonegotiation of speed and duplex mode or manually configure speed and duplex mode for each Ethernet port of the router.
  • Page 156 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 122. The window for changing the settings of the router's port. In the opened window, specify the needed parameters: Parameter Description Data transfer mode. Select the Auto value to enable autonegotiation.
  • Page 157 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Flow control Move the switch to the right to enable the flow control function for the port. Symmetric flow control Move the switch to the left to disable the flow control function for the port.
  • Page 158: Redirect

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Redirect On the Advanced / Redirect page, you can enable notifications on the reason of the Internet connection failure. Notifications will be displayed in the browser window when a user is attempting to open a web site on the Internet.
  • Page 159: Routing

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Routing On the Advanced / Routing page, you can specify static (fixed) routes. Figure 124. The Advanced / Routing page. To specify a new route, click the ADD button ( Figure 125.
  • Page 160 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the route. Enable Move the switch to the left to disable the route.
  • Page 161: Tr-069 Client

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual TR-069 Client On the Advanced / TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS). The TR-069 client is used for remote monitoring and management of the device.
  • Page 162 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Inform Settings Move the switch to the right so the router may send reports (data on the device and network statistics) to the ACS.
  • Page 163: Upnp Igd

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual UPnP IGD On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The router uses the UPnP IGD protocol for automatic configuration of its parameters for network applications requiring an incoming connection to the router.
  • Page 164: Udpxy

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual UDPXY On the Advanced / UDPXY page, you can allow the router to use the built-in UDPXY application. The UDPXY application transforms UDP traffic into HTTP traffic. This application allows devices which cannot receive UDP streams to access stream video.
  • Page 165 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To access the status page of the application, click the Status link. Figure 129. The UDPXY application status page. Page 165 of 235...
  • Page 166: Igmp/Mld

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual IGMP/MLD On the Advanced / IGMP/MLD page, you can allow the router to use IGMP and MLD and specify needed settings. IGMP and MLD are used for managing multicast traffic (transferring data to a group of destinations) in IPv4 and IPv6 networks correspondingly.
  • Page 167 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Enable Move the switch to the right to enable MLD. MLD version Select a version of MLD from the drop-down list. From the drop-down list, select a connection of the Dynamic IPv6 or Interface Static IPv6 type for which you need to allow multicast traffic (e.g.
  • Page 168: Alg/Passthrough

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual ALG/Passthrough On the Advanced / ALG/Passthrough page, you can allow the router to use RTSP, enable the SIP ALG and PPPoE/PPTP/L2TP/IPsec pass through functions. SIP is used for creating, modifying, and terminating communication sessions. This protocol allows telephone calls via the Internet.
  • Page 169 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual The following elements are available on the page: Parameter Description Move the switch to the right to enable SIP. Such a setting allows using the SIP ALG function. This function allows VoIP traffic to pass through the NAT-enabled router.
  • Page 170: Ipsec

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual IPsec On the Advanced / IPsec page, you can configure VPN tunnels based on IPsec protocol. IPsec is a protocol suite for securing IP communications. Figure 132. The Advanced / IPsec page.
  • Page 171 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To create a new tunnel, click the ADD button ( ) in the Tunnels section. Setting for both devices which establish the tunnel should be the same.
  • Page 172 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description A name for the tunnel for easier identification. Use digits, Latin letters Name (uppercase and/or lowercase), and other characters available in the US keyboard layout.
  • Page 173 • the default WAN connection. A local identifier of the router to establish connection over IPsec with particular hosts only. To establish connection, DIR-822 local identifier Local identifier value should correspond to the remote identifier value specified in the settings of the remote host. Use an IP address, domain name, or certificate CN.
  • Page 174 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to enable using DPD protocol for this tunnel. Such a setting allows to check the status of the remote host: if...
  • Page 175 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 134. The page for adding an IPsec tunnel. The First Phase / The Second Phase sections. Parameter Description The First Phase First phase Select an available encryption algorithm from the drop-down list.
  • Page 176 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description IKE (Internet Key Exchange) is a protocol of keys exchange between two hosts of VPN connections. Select a version of the protocol from IKE version the drop-down list.
  • Page 177 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 135. The page for adding an IPsec tunnel. The window for adding a tunneled network. In the opened window, you can specify the following parameters:...
  • Page 178: Firewall

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Firewall In this menu you can configure the firewall of the router: add rules for IP filtering • create virtual servers • define a DMZ •...
  • Page 179 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 137. The page for adding a rule for IP filtering. You can specify the following parameters: Parameter Description General Settings Move the switch to the right to enable the rule.
  • Page 180 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description A name for the rule for easier identification. You can specify any Name name. Select an action for the rule. Allow: Allows packet transmission in accordance with the •...
  • Page 181 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Source IP Address Set as Select the needed value from the drop-down list. The source host start IPv4 or IPv6 address. If it is necessary to specify a single address, leave the End IPv4 Start IPv4 address / address / End IPv6 address field blank.
  • Page 182 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To set a schedule for the IP filter rule, click the Set schedule icon ( ) in the line corresponding to this rule. In the opened window, from the Rule drop-down list, select the Create rule value to create a new schedule (see the Schedule section, page 204) or select the Select an existing one value to use the existing one.
  • Page 183: Virtual Servers

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Virtual Servers On the Firewall / Virtual Servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
  • Page 184 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 139. The page for adding a virtual server. You can specify the following parameters: Parameter Description General Settings Move the switch to the right to enable the server.
  • Page 185 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description A name for the virtual server for easier identification. You can Name specify any name. Select a virtual server template from the drop-down list, or select...
  • Page 186 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To enable the virtual server at the time specified in the schedule and disable it at the other time, select the Enable rule value from the Action drop-down list and click the SAVE button.
  • Page 187: Dmz

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks. In the router, the DMZ implements the capability to transfer a request coming to a port of the router from the external network to a specified host of the internal network.
  • Page 188 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To set a schedule for the DMZ, click the Set schedule icon ( ). In the opened window, from the Rule drop-down list, select the Create rule value to create a new schedule (see the Schedule section, page 204) or select the Select an existing one value to use the existing one.
  • Page 189: Mac Filter

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual MAC Filter On the Firewall / MAC Filter page, you can configure MAC-address-based filtering for computers of the router's LAN. Figure 141. The Firewall / MAC Filter page.
  • Page 190 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the rule. Enable rule Move the switch to the left to disable the rule.
  • Page 191: Url Filter

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual URL Filter On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites and define devices to which the specified restrictions will be applied.
  • Page 192 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To specify URL addresses to which the selected filtering mode will be applied, in the Addresses section, click the ADD button ( ). In the opened window, you can specify the following...
  • Page 193 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To enable the URL filter for the time specified in the schedule and disable it at the other time, select the Enable rule value from the Action drop-down list and click the SAVE button.
  • Page 194: Adblock

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual AdBlock On the Firewall / AdBlock page, you can enable the function of blocking advertisements which appear during web surfing. Figure 144. The Firewall / AdBlock page.
  • Page 195: Remote Access

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Remote Access On the Advanced / Remote Access page, you can configure access to the web-based interface of the router. By default, the access from external networks to the router is closed. If you need to allow access to the router from the external network, create relevant rules.
  • Page 196 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description A name for the rule for easier identification. You can specify any Name name.
  • Page 197: System

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual System In this menu you can do the following: change the password used to access the router's settings • restore the factory default settings • create a backup of the router's configuration •...
  • Page 198: Configuration

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Configuration On the System / Configuration page, you can change the password for the administrator account used to access the web-based interface of the router and to access the device settings via TELNET...
  • Page 199 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual The following buttons are also available on the page: Control Description Click the button to restore the factory default settings. Also you can Factory restore the factory defaults via the hardware RESET button (see the Back and Bottom Panels section, page 16).
  • Page 200: Firmware Update

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Firmware Update On the System / Firmware Update page, you can update the firmware of the router and configure the automatic check for updates of the router's firmware.
  • Page 201 Configuring via Web-based Interface User Manual By default, in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is specified. To add one more address, click the ADD button and enter the address in the displayed line. To remove the address, click the Delete icon ( ) in the line of the address.
  • Page 202: Local Update

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Local Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown. To update the firmware of the router locally, follow the next steps: 1.
  • Page 203: Remote Update

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Remote Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown. To update the firmware of the router remotely, follow the next steps: 1.
  • Page 204: Schedule

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Schedule On the System / Schedule page, you can enable/disable Wi-Fi connection and the Wi-Fi filter, configure automatic reboot of the device on a schedule, and set a schedule for different rules and settings of the firewall.
  • Page 205 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the opened window, in the System Time field, the system time of the device is displayed. You can select the Simplified mode value from the Mode drop-down list and specify the following...
  • Page 206 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To set a schedule for a task which will be applied to a rule or setting of the firewall or will enable/disable Wi-Fi connection or Wi-Fi filter, click the ADD button ( ) in the All Tasks section.
  • Page 207 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Specify the time period for performing a task. Every minute. • Every hour: When this value is selected, the Time field is • displayed in the section.
  • Page 208: Log

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual On the System / Log page, you can set the system log options and configure sending the system log to a remote host. Figure 152. The System / Log page. The Settings tab.
  • Page 209 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description Logging Select a type of logging from the drop-down list. Local: The system log is stored in the router's memory. When • this value is selected, the Server and Port fields are not displayed.
  • Page 210 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To view the system log, go to the Log tab. Figure 153. The System / Log page. The Log tab. To view the latest system events, click the REFRESH button.
  • Page 211: Ping

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility. The Ping utility sends echo requests to a specified host and receives echo replies.
  • Page 212 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Figure 155. The System / Ping page. The additional settings window. In the opened window, in the Packet size field, specify the volume of data sent in a request. In the Waiting for response field, specify the response waiting period in seconds.
  • Page 213: Traceroute

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Traceroute On the System / Traceroute page, you can determine the route of data transfer to a host via the traceroute utility. Figure 156. The System / Traceroute page.
  • Page 214 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual To specify additional settings, click the MORE SETTINGS button. Figure 157. The System / Traceroute page. The additional settings window. In the opened window, you can specify the following parameters:...
  • Page 215: Telnet/Ssh

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Telnet/SSH On the System / Telnet/SSH page, you can enable or disable access to the device settings via TELNET and/or SSH from your LAN. By default, access is disabled.
  • Page 216: System Time

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual System Time On the System / System Time page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.
  • Page 217 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual 3. Select your time zone from the Time zone drop-down list. To set the time zone in accordance with the settings of your operating system or portable device, click the DETERMINE TIMEZONE button.
  • Page 218 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual When the router is powered off or rebooted, the system time is reset to the default value. If you have set automatic synchronization for the system time, the internal clock of the device will be configured after connecting to the Inter net.
  • Page 219: Auto Provision

    On the System / Auto Provision page, you can enable the Auto Provision function. The Auto Provision function allows your ISP to manage the device’s settings remotely: DIR-822 connects to the ISP’s server, compares the current configuration file with the configuration file stored on this server, and updates its settings if the files are different.
  • Page 220 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Parameter Description A time period (in seconds) between attempts to compare the current File check period configuration file with the configuration file on the ISP's server.
  • Page 221: Yandex.dns

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Yandex.DNS This menu is designed to configure the Yandex.DNS service. Yandex.DNS is a web content filtering service which provides the DNS server, protects a computer against malicious web sites, and blocks access to adult web sites.
  • Page 222 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual When the service is enabled, the Default Mode section is displayed on the page. Select the needed choice of the radio button to configure filtering for all devices of the router's network.
  • Page 223: Devices And Rules

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Devices and Rules On the Yandex.DNS / Devices and Rules page, you can specify a filtering mode for each device separately. Figure 162. The Yandex.DNS / Devices and Rules page.
  • Page 224 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description The MAC address of a device from the router's LAN. You can enter the MAC address of a device connected to the router's LAN at the MAC address moment.
  • Page 225: Skydns

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual SkyDNS This menu is designed to configure the SkyDNS service. SkyDNS is a web content filtering service which provides protection against malicious web sites for devices connected to the router's network, and also allows to configure filtering, block access to adult web sites, and use search engines safely.
  • Page 226: Settings

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Settings On the SkyDNS / Settings page, you can enable the SkyDNS service and specify settings for its operation. The SkyDNS service is unavailable when the Yandex.DNS service is enabled.
  • Page 227 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual By default, the account parameters are automatically synchronized with the SkyDNS service web site once an hour. To start synchronization manually, click the MANUALLY SYNC button.
  • Page 228: Devices And Rules

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual Devices and Rules On the SkyDNS / Devices and Rules page, you can assign a specific filtering profile to a device connected to the router's network.
  • Page 229 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Configuring via Web-based Interface User Manual In the opened window, specify the following parameters: Parameter Description The MAC address of a device from the router's LAN to which the specified filtering profile will be applied. You can enter the MAC MAC address address of a device connected to the router's LAN at the moment.
  • Page 230: Chapter 5. Operation Guidelines

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Operation Guidelines User Manual CHAPTER 5. OPERATION GUIDELINES Safety Rules and Conditions Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged. The device should be used only as intended in accordance with the documents.
  • Page 231: Wireless Installation Considerations

    RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DIR-822 device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3- 90 feet (1-30 meters).
  • Page 232: Chapter 6. Abbreviations And Acronyms

    DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Abbreviations and Acronyms User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Third Generation Access Category Advanced Encryption Standard Access Point Address Resolution Protocol BPSK Binary Phase-shift Keying BSSID Basic Service Set Identifier Complementary Code Keying...
  • Page 233 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Abbreviations and Acronyms User Manual ICMP Internet Control Message Protocol Identifier Internet Gateway Device IGMP Internet Group Management Protocol Internet Key Exchange IMEI International Mobile Equipment Identity IMSI International Mobile Subscriber Identity...
  • Page 234 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Abbreviations and Acronyms User Manual Push Button Configuration Perfect Forward Secrecy Personal Identification Number Power over Ethernet Point-to-Point Protocol pppd Point-to-Point Protocol Daemon PPPoE Point-to-point protocol over Ethernet PPTP Point-to-point tunneling protocol...
  • Page 235 DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router Abbreviations and Acronyms User Manual TKIP Temporal Key Integrity Protocol Universal Access Method User Datagram Protocol UPnP Universal Plug and Play Uniform Resource Locator Universal Serial Bus VLAN Virtual Local Area Network...

Table of Contents