Honeywell EXCEL5000 OPEN XILON User Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Tools
  5. EXCEL5000 OPEN XILON
  6. User manual
Honeywell EXCEL5000 OPEN XILON User Manual

Honeywell EXCEL5000 OPEN XILON User Manual

Handheld tool
Hide thumbs
Table of Contents

Quick Links

XILON
HANDHELD TOOL
USER GUIDE
Copyright © 2003 Honeywell Inc. • All Rights Reserved
EN2B-0214GE51 R0503
74-3672-1
Table of Contents
loading

Related Manuals for Honeywell EXCEL5000 OPEN XILON

Summary of Contents for Honeywell EXCEL5000 OPEN XILON

  • Page 1 XILON HANDHELD TOOL USER GUIDE Copyright © 2003 Honeywell Inc. • All Rights Reserved EN2B-0214GE51 R0503 74-3672-1...
  • Page 2 XILON HANDHELD TOOL - USER GUIDE Trademark Information Echelon, LON, L , LonBuilder, NodeBuilder, LonManager, ORKS LonTalk, LonUsers, LonPoint, Neuron, 3120, 3150, the Echelon logo, the L logo, and the LonUsers logo are trademarks of Echelon Corporation registered in the United States and other countries. LonLink, LonResponse, LonSupport, and LonMaker are trademarks of Echelon Corporation.

  • Page 3: Table Of Contents

    I/O Dialog Screen (XL Smart I/O's and Distributed I/O's, only)......24 Parameter Dialog Screen (Compact ACU Controllers, only)......25 All Automatic ......................29 Honeywell Properties (°C or °F)................30 Downloading and Upgrading Honeywell Firmware ......................... 31 Downloading the XILON Application ............... 31 Downloading BIOS....................32 Troubleshooting / FAQ ................................33 Does XILON work across LON routers? ..............
  • Page 4 XILON HANDHELD TOOL - USER GUIDE Possible Cause Number Nine ................35 Why doesn't my XILON react to user input?............36 Possible Cause Number One................36 Possible Cause Number Two................36 Why does my XILON switch OFF automatically? ........... 36 Possible Cause Number One................

  • Page 5: About This User Guide

    L network. ORKS Using Honeywell's XILON Handheld Tool for Wiring Checks (henceforth referred to simply as "XILON"), these tasks can be easily performed by a single individual with no knowledge of L and no experience with tools like LonMaker for ORKS Windows™.

  • Page 6: Quick Reference For When You're In A Hurry

    XILON's database automatically, and such functions as "I/O Functions" and "All Automatic" can then be utilized, as desired. Honeywell I/O Functions Pressing the key while the "I/O Functions" item has the focus enables you to perform wiring checks on Distributed I/O modules and/or Excel Smart I/O modules.

  • Page 7: Introduction

    This User Guide addresses itself to panel builders and technicians who are responsible for checking and changing the wiring of input/output modules (e.g. Honeywell's Distributed I/O modules and Excel Smart I/O modules) installed on a network and who may also need to manually override and check the ORKS operation of the field devices connected to them.

  • Page 8: Contents Of The Shipment

    CD-ROM including technical literature such as a PDF file and the terminal program for upgrading the BIOS and/or the XILON application (see also "Downloading and Upgrading Honeywell Firmware" on page 31). These articles are described in greater detail in the following sections.
  • Page 9 XILON HANDHELD TOOL - USER GUIDE Features Located on Top of Device The following features are located on the top of the device (from left to right): Power Supply Jack The power supply unit and attached cable (included in the shipment) can be inserted into the power supply jack to provide electrical power from any standard EURO power supply socket with a primary voltage of from 100 Vac to 240 Vac.

  • Page 10: Power Supply Unit And Attached Cable

    The LCD display consists of a 64 x 128 pixel display. The contrast is adjusted using the contrast control screw (see below). When the device is first turned on, a Honeywell-specific start-up menu appears. Reset Button The reset button is located on the left-hand side of the device. Because it is recessed, you must use a pointed tool to press it;...

  • Page 11: Controls Common To All Menus

    XILON HANDHELD TOOL - USER GUIDE CONTROLS COMMON TO ALL MENUS Navigating within the Workspace XILON features a number of keys used for navigating within the workspace (i.e. contents of a single or multiple display screens) and for selecting individual items. Focus Before an item can be selected, it must have the focus.

  • Page 12: Hot Keys (

    (but not in dialogs). NOTE: The descriptions of the results of the following combinations of and hot keys are valid for XILON Honeywell version 1.00.93. + Pressing and then the hot key initiates the "I/O" function.

  • Page 13: Deleting Items In Xilon's Database

    XILON HANDHELD TOOL - USER GUIDE + Pressing and then the hot key initiates the "Change Status" function, i.e. the node is placed in one of the following four states: configured/online, configured/offline, unconfigured, or applicationless. + Pressing ...
  • Page 14 XILON HANDHELD TOOL - USER GUIDE • > value must be greater than or equal to the displayed minimum, • < value must be less than or equal to the displayed maximum. A correct value can then be entered. NOTE: You can exit from the edit mode only if the value is valid or the -key is pressed.

  • Page 15: Overview Of Honeywell-Specific Functions

    Honeywell Properties (°C or °F) Fig. 2. Overview of XILON functions, including Honeywell-specific functions Service Pin (or ) Pressing the key while this item has the focus causes XILON to wait for a service pin message from a node. Alternatively, the hot key can be pressed.
  • Page 16 Neuron Chip ID. I/O Functions This function enables you to perform wiring checks on Honeywell modules (e.g. Distributed I/O modules and/or Excel Smart I/O modules) and to set up the parameters of / monitor the status of / procure diagnostic information on Compact ACU controllers.

  • Page 17: Using Your Xilon

    Depending on the history (i.e. whether or not the database is empty), the following welcome screens appear. SDH BIOS V.1.401 (c) SysMik 2001 Restart Setup Menu (Shown for approx. 2 seconds) Honeywell XILON V. 1.00.00 (GUI 2030) New=ENTER,Old=ESC (Shown for approx. 2 seconds) Fig. 3. Welcome screens (database is not empty) SDH BIOS V.1.401...

  • Page 18: Switching Xilon Off

    XILON HANDHELD TOOL - USER GUIDE however, you would like to create a new database, the key must be pressed while the second welcome screen shown Fig. 3 is active. NOTE: The database can also be cleared later using a special menu. If you do nothing, the second screen will disappear automatically after 10 seconds.
  • Page 19 XILON HANDHELD TOOL - USER GUIDE • from the tree view menu. The key can be used to switch back and forth between the toolbar menu and the tree view menu. Switching Off from the Toolbar Menu When the toolbar menu is active, you can switch OFF XILON by going to "device menu"...

  • Page 20: Xilon Set-Up

    XILON HANDHELD TOOL - USER GUIDE NOTE: If XILON is running on battery power, you can set up an automatic, time- controlled shutdown. XILON Set-Up After selecting "XILON Set-Up", you will have a choice of either "Device" or "Application." Device <...

  • Page 21: General Settings

    ON and OFF. NOTE: If the battery charging process is interrupted, it resumes as soon as XILON is switched ON again. NOTE: When connected to an external AC power supply, XILON's internal batteries are automatically recharged, by default. HONEYWELL FUNCTIONS EN2B-0214GE51 R0503...

  • Page 22: Service Pin

    F1=Help F10=Menu Fig. 13. Search menu NOTE: The user must select the node before he can use the "Honeywell I/O" function or the "Honeywell Configuration" function. Once you have searched for and found a node, it is automatically entered into XILON's database, and such functions as "I/O Functions "...

  • Page 23: Edit Nid

    Honeywell Distributed I/Os (XFL521 and XFL521B, XFL522A and XFL522B, XFL523 and XFL523B, as well as XFL524A and XFL524B), • Honeywell Excel Smart I/Os (XFC 2A05, XFC 2A06, XFC 3A04, XFC 3A05, XFC 3A06, XFC 2D05, XFC 2D06, XFC 3D04, XFC 3D05, and XFC 3D06), •...

  • Page 24: I/O Dialog Screen (Xl Smart I/O's And Distributed I/O's, Only)

    Fig. 16. I/O menu for communication errors I/O Dialog Screen (XL Smart I/O's and Distributed I/O's, only) If the selected node is a Honeywell Distributed I/O or Excel Smart I/O, the I/O dialog screen will appear (see Fig. 17). ←information on data base (node 2) Db:002/004 ←table header (see below)

  • Page 25: Parameter Dialog Screen (Compact Acu Controllers, Only)

    NOTE: The temperatures can be displayed either in degrees Celsius or degrees Fahrenheit. This can be set up in the Honeywell Properties dialog (see below). To change a binary output value, press , thus toggling the value until changed as desired.
  • Page 26 XILON HANDHELD TOOL - USER GUIDE The status line displays text which changes cyclically (the entire cycle is about 18 seconds long). Specifically, it displays • "D:", followed by the device name (e.g. ZAC800-651-50), then • the standard text, then •...
  • Page 27 XILON HANDHELD TOOL - USER GUIDE Parameters: Only those parameters which are relevant for the configured application are shown. Parameters can be changed (see also section "Changing Values" on page 13). Values which are entered will be changed to align them to a grid of possible values. If a value is changed, the configuration parameter will be written to the controller.
  • Page 28 XILON HANDHELD TOOL - USER GUIDE Alarms: Alarm information is presented in a fashion similar to that in which the parameters are presented. This information is read-only information and thus cannot be changed. A: C1 LP Compressor 1 low pressure alarm Compressor 2 low pressure alarm A: C2 LP A: C1 HP...

  • Page 29: All Automatic

    XILON HANDHELD TOOL - USER GUIDE Cause Codes are shown as numbers: Sequence Causes SEQ_CTRL_NETWORK SEQ_HEAT1_PI SEQ_HEAT2_PI SEQ_COOL1_PI SEQ_COOL2_PI SEQ_HVAC_OFF SEQ_INVALID_APPL SEQ_WAIT_FOR_FAN SEQ_COMP_ALARM SEQ_EXTERN_ALARM SEQ_WAIT_FOR_RS_VALVE SEQ_PUMP_DOWN SEQ_DEFROST SEQ_MIN_ON_TIME SEQ_MIN_OFF_TIME Fan Causes FAN_HEAT_CONTROL FAN_COOL_CONTROL FAN_CYCLING FAN_CONTINUOUS FAN_HIGHER_DELAY FAN_LOWER_DELAY FAN_SWITCH FAN_ENERGY_OFF FAN_EMERGENCY FAN_WAIT_FEEDB FAN_VALVE_REQUEST FAN_INTERLOCK...

  • Page 30: Honeywell Properties (°C Or °F)

    1 second OFF) if a module has a value in the manual mode. After a power failure, the Smart I/O module will re-establish the manual value. Honeywell Properties (°C or °F) When set to "°C", XILON displays all temperature values in Celsius. Using this function, all temperature values can be switched to the Fahrenheit scale.

  • Page 31: Downloading And Upgrading Honeywell Firmware

    DOWNLOADING AND UPGRADING HONEYWELL FIRMWARE Your XILON is delivered with the Honeywell firmware already downloaded. If, however, at some future point in time you wish to reload or upgrade the Honeywell firmware (i.e. XILON application or BIOS), proceed as described in the following two sections.

  • Page 32: Downloading Bios

    XILON HANDHELD TOOL - USER GUIDE Download started Status: ? Fig. 21. Download started Start the Handheld Flash Tool V2.11 (e.g.: VC_DL.EXE xil10093.bin COM1) and follow the instructions appearing on your computer screen. Downloading BIOS The BIOS (file name e.g.: bios1401.bin) is downloaded into XILON using the Handheld Flash Tool V2.11 (file name: VC_DL.EXE).

  • Page 33: Troubleshooting / Faq

    NV table). In any event, there is sufficient space for all of the devices of one channel (62 nodes). If you use only the Honeywell functions, you can have far more than 100 nodes in the database. EN2B-0214GE51 R0503...

  • Page 34: Why Can't I Access A Node Present In The Network

    Both your XILON and all Honeywell nodes have transceivers of the type TP/FTT-10A; you can thus encounter this problem when attempting to access non-Honeywell nodes. To access such a node, you will have to either insert a suitable router (see "Inserting a Suitable Router" below) or reconnect your XILON to the network at another location with a compatible communication channel (see "Reconnecting at a Different Location"...

  • Page 35: Possible Cause Number Five

    XILON HANDHELD TOOL - USER GUIDE Explanation/Action XILON and the node you are searching for must be located on the same domain, i.e. their domain lengths and domain IDs must be the same. To determine a device's domain length and domain ID, press its service pin and use the ...

  • Page 36: Why Doesn't My Xilon React To User Input

    XILON HANDHELD TOOL - USER GUIDE Explanation/Action Change or (better yet) remove the search filter (using the hot key + "set-up addressing"). Why doesn't my XILON react to user input? If your XILON no longer reacts to user input., i.e. if your XILON's display shows a normal text or graphic, but the display does not change, you should consider the following possible causes: Possible Cause Number One...

  • Page 37: Possible Cause Number Three

    XILON HANDHELD TOOL - USER GUIDE Possible Cause Number Three A watchdog reset has been performed automatically. Explanation/Action Your XILON has been placed in an unexpected state in which normal functioning is no longer possible. A special monitoring component (a so-called "watchdog") recognizes this situation and automatically resets XILON.

  • Page 38: The Display Shows The "No Access" Screen Even Though The Node Is Present

    XILON HANDHELD TOOL - USER GUIDE Explanation/Action In order to prevent the battery from overheating, XILON will begin a quick charging procedure only if the battery temperature remains below a certain value. The display shows the "no access" screen even though the node is present Db:001/005 ------ D: no access...

  • Page 39: Glossary

    XILON HANDHELD TOOL - USER GUIDE GLOSSARY AI: analog input. ALTOhandheld: The original name of the XILON Handheld (which is based on SysMik's ALTOhandheld). AO: analog output. binding: The process of defining the connections between different NV's; specifically: the process of defining the data which nodes share with one another. Binding is performed during the commissioning phase using a L network ORKS...
  • Page 40 A subnet is a logical collection of up to 127 nodes or devices within a domain. SysMik GmbH: The Dresden-based company which manufactures the ALTOhandheld upon which Honeywell's XILON Handheld Tool for Wiring Checks is based. third-party node: Non-Honeywell devices present in the L network.
  • Page 41 XILON HANDHELD TOOL - USER GUIDE EN2B-0214GE51 R0503...

  • Page 42: Index

    XILON HANDHELD TOOL - USER GUIDE INDEX backlit LCD 22 menu, tree view battery 20 going to device menu 20 charging 22 switching back and forth between the toolbar menu and dead battery 36, 37 the tree view menu 19 effect of low battery on XILON operation 37 switching OFF from 19 effect of low battery power on display contrast 22...
  • Page 43 XILON HANDHELD TOOL - USER GUIDE EN2B-0214GE51 R0503...
  • Page 44 Automation and Control Solutions Honeywell Inc. Honeywell Limited-Honeywell Limitee Honeywell AG Honeywell Plaza 155 Gordon Baker Road Böblinger Straβe 17 manufacturing P.O. Box 524 North York, Ontario D-71101 Schönaich location certified to Minneapolis, MN 55408-0524 M2H 3N7 Germany Canada http://www.honeywell.com http://www.honeywell.ca...

Table of Contents