Electrolux E9WHMIC1 Manual

Electrolux E9WHMIC1 Manual

Microplastic filter
Hide thumbs Also See for E9WHMIC1:

Quick Links

EN Microplastic Filter
E9WHMIC1
Table of Contents
loading

Summary of Contents for Electrolux E9WHMIC1

  • Page 1 EN Microplastic Filter E9WHMIC1...
  • Page 2 1. QR CODE electrolux.com/manual/microplasticfilter Read instructions before installation for important safety warnings and tips. Scan the QR code to access full user manual in local language. За важни предупреждения и съвети за безопасност, прочетете инструкциите преди инсталирането. Сканирайте QR кода, за да получите достъп до пълното...
  • Page 3 ENGLISH Lees de instructies voor de installatie voor belangrijke veiligheidswaarschuwingen en tips. Scan de QR-code om toegang te krijgen tot de volledige gebruikershandleiding in de lokale taal. Przed instalacją należy zapoznać się z instrukcją, w której znajdują się ważne wskazówki i ostrzeżenia dotyczące bezpieczeństwa. Aby uzyskać...
  • Page 4: Safety Information

    SAFETY INFORMATION Before the installation and use of the product, read the supplied instructions carefully. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 5 To repair the product contact the Authorised Service • Centre. Use only original spare parts. This external accessory is compatible with • Electrolux/AEG/Zanussi household washing machines. Environmental concerns Recycle materials with the symbol . Put the packaging in relevant containers to recycle it.
  • Page 6: Before Installation

    3. INSTALLATION 3.1 Before Installation Visit electrolux.com/ getstarted/microplasticfilters WARNING! for the installation and usage Refer to Safety chapters. videos. 1. Select a proper location on the wall to install filter: To avoid leakages over the washing machine, it is preferable to instal the filter on either side of your washing machine.
  • Page 7: Installing The Accessory

    ENGLISH 3. Prepare necessary tools for the installation. 3.2 Installing the accessory 1. Remove the filter from packaging box and remove the wall support with the help of a flat screwdriver.
  • Page 8 2. The position of your filter needs to follow these listed points (a and b): a. Position the wall support at the correct height, measuring 110 cm* from top of the wall support to the floor (or pedestal if present). *Tolerance admitted in filter height position is +/-5 cm.
  • Page 9 ENGLISH 3. Drill the holes into the wall and place the anchors. WARNING! Before drilling in the wall, make sure no water pipes or electrical wires are behind. It is recommended to use a ф 6mm drill bit. The filter package includes three dedicated screws and plastic anchors to properly and...
  • Page 10 5. Take the hoses, the collars and the filter body. Insert the collars on the hoses and connect pipes to the filter body following IN/OUT indications present on the back of the filter body: IN: hose which comes from the WM, OUT: hose (present in the filter package) which goes to the drain.
  • Page 11 ENGLISH click Before proceeding to the next topic Daily use & care and cleaning, start the short washing programme and follow it until the end. Be sure that no leakages appear from the filter and its connections. In case of water leakage, proceed as described in paragraph 8.
  • Page 12 Clean the cartridge regularly, WARNING! once a week or when the red Do not reuse water from the floater indicator is clearly filter. It may contain micro- visible. plastic particles that are unfit for human and animal consumption. When the filter is clogged, the red floater located inside the cover becomes visible, alerting the user that the...
  • Page 13: Care And Cleaning

    ENGLISH 4.2 Care and Cleaning Cleaning the filter and microfibres disposal. To open the filter, refer to the movements in Picture 1 and 2: 1. Rotate the cover counter clockwise from lock symbol to unlock symbol (available on front of filter as shown in picture 2), 2.
  • Page 14 To Lock/Unlock the cartridge, refer to Picture 4 and 5: Lock (picture 4) / Unlock (picture 5). To clean the cartridge and dispose of its contents, refer to Picture 6, 7, 8 and 9. If the cartridge is fully clogged, it may be full of dirty water.
  • Page 15 ENGLISH Holding the cartridge inside the container, use the brush-spatula tool available in the filter box. With up/down brush movement remove as much as possible the fibres attached to the cartridge net to help the evacuation of water. Dispose of waste from the filter into the general dry waste.
  • Page 16 To replace the cartridge, refer to Picture 11: 1. Insert the cartridge. 2. Hold the cartridge in your hand, then with the other hand turn the cover clockwise from unlock symbol to lock symbol. To close the filter, refer to the movements in Picture 12: 1.
  • Page 17 2. Put the cartridge and the waste in to a recycle bin. For additional cartridge spare parts use only original parts. Cartridges are sold in any Electrolux/AEG service centre or even online. Appendixes 150 cm Appendix for Front Loader washing machine.
  • Page 18: Environmental Concerns

    5. ENVIRONMENTAL CONCERNS appliances marked with the symbol Recycle materials with the symbol with the household waste. Return the Put the packaging in relevant containers product to your local recycling facility or to recycle it. Help protect the contact your municipal office. environment and human health by recycling waste of electrical and electronic appliances.

Table of Contents