SONY WF-SP800N Wireless Headset Manual

SONY WF-SP800N Wireless Headset Manual

Also See for WF-SP800N:
SONY WF-SP800N Wireless Headset Manual

Quick Instructions


  1. Quick Instructions Step 1

  2. Quick Instructions Step 2

  3. Quick Instructions Step 3

  4. Quick Instructions Step 4

  5. Quick Instructions Step 5

  6. Quick Instructions Step 6

  7. Quick Instructions Step 7

Left EarphoneRight Earphone

Label Location

  1. MANUFACTURER: SONY CORP.
    EU IMPORTER: SONY EUROPE B.V.
    DA VINCILAAN 7-D1, 1930 ZAVENTEM, BELGIUM
    INPUT: 5 V
    OUTPUT: 5 V 80 mA (L), 5 V 80 mA (R)
    WF-SP800N
    CHARGING CASE
    MADE IN MALAYSIA

Safety Information

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.

Do not subject the batteries to extreme low temperature conditions that may result in overheating and thermal runaway.

Do not dismantle, open or shred secondary cells or batteries.

Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.

In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.

Secondary cells and batteries need to be charged before use. Always refer to the manufacturer's instructions or equipment manual for proper charging instructions.

After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance.

Dispose of properly.

This equipment has been tested and found to comply with the limits set out in the EMC regulation using a connection cable shorter than 3 meters.

High volume may affect your hearing.

Do not use the unit while walking, driving or cycling. Doing so may cause traffic accidents. Do not use at a dangerous place unless the surrounding sound can be heard.

If water or foreign objects enter the unit, it may result in fire or electric shock. If water or a foreign object enters the unit, stop use immediately and consult your nearest Sony dealer. In particular, be careful in the following cases.

  • When using the unit around a sink, etc.
    Be careful that the unit does not fall into a sink or container filled with water.

For details on the effect of contact to the human body from the mobile phone or other wireless devices connected to the unit, refer to the instruction manual of the wireless device.

Install the earbuds firmly. Otherwise, they may detach and be left in your ears, resulting in injury or illness. Never insert the USB plug when the main unit or charging cable is wet. If the USB plug is inserted while the main unit or charging cable is wet, a short circuit may occur due to the liquid (tap water, seawater, soft drink, etc.) attached to the main unit or charging cable or due to foreign matter, and cause abnormal heat generation or malfunction.

This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.

This product (including accessories) has magnet(s). Swallowing magnet(s) could cause serious harm, such as choking hazard or intestinal injuries. If magnets (or a magnet) were swallowed, consult a doctor immediately. Keep this product away from children or other supervised individuals to prevent accidental ingestion.

There is a danger that this unit or its small parts may be swallowed. After use, store the unit in the charging case and store in a location out of the reach of small children.

Note on static electricity

Static electricity accumulated in the body may cause mild tingling in your ears. To reduce the effect, wear clothes made from natural materials, which suppress the generation of static electricity.

Precautions

On splash proof/dust proofing performance of the unit

  • The splash proof specifications of this unit are equivalent to IPX5 in IEC 60529 "Degrees of protection against ingress of water (IP Code)", which specifies the degree of protection provided against the entry of water, and the dust proofing specifications of this unit are equivalent to IP5X in IEC 60529 "Degrees of protection against solid foreign objects (IP Code)", which specifies the degree of protection provided against the entry of solid foreign objects. Unless the unit is used correctly, water or dust may get into the unit and cause fire, electrocution, or malfunctions.
    Note the following cautions carefully and use the unit correctly.
    IPX5: The unit will maintain its operability even when exposed to direct jet streams of water from any direction (except for the sound conduits (sound output tubes) of the headset). IP5X: The unit will maintain its safety and satisfactory operation in the event of an ingress of dust.

Liquids that the splash proof performance specifications apply to

Applicable Fresh water, tap water, perspiration
Not applicable Liquids other than those above (examples: soapy water, detergent water, water with bath agents, shampoo, hot spring water, pool water, seawater, etc.)

The splash proof/dust proofing performance of the unit is based on measurements performed by Sony under the conditions described above. Note that malfunctions resulting from water immersion caused by customer misuse are not covered by the warranty.

To maintain splash proof/dust proofing performance

Carefully note the precautions below to ensure proper use of the unit.

On BLUETOOTH® communications

  • Bluetooth communications may not be possible, or noise or audio dropout may occur under the following conditions:
  • Bluetooth and Wi-Fi (IEEE802.11b/g/n) devices use the same frequency (2.4 GHz). When using the unit near a Wi-Fi device, electromagnetic interference may occur, resulting in noise, audio dropout, or the inability to connect. If this happens, try performing the following remedies:
  • Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident:
  • Connection with all Bluetooth devices cannot be guaranteed.

If sound skips frequently during playback

On the use of calling apps for smartphones and computers

On charging the unit

If the unit does not operate properly

On the noise cancelling function

  • The noise cancelling function senses external ambient noise (such as the noise inside a vehicle or the sound of air conditioning inside a room) with built-in microphones, and produces an equal-but-opposite sound that cancels out the ambient noise.

Notes on wearing the unit

Other notes

Cleaning the unit

Replacement parts: Hybrid silicone rubber earbuds, Arc supporters

Please consult your nearest Sony dealer for information about replacement parts.

Location of the serial number label

See Fig. G

Specifications

Headset

Power source: DC 3.7 V: Built-in lithium-ion rechargeable battery DC 5 V: When charged using USB
Operating temperature: 0°C to 40°C
Rated power consumption: 1 W (Headset), 3 W (Charging case)
Usage hours: When connecting via the Bluetooth device Music playback time: Max. 9 hours (NC ON), Max. 9 hours (Ambient Sound Mode), Max. 13 hours (NC OFF) Communication time: Max. 7 hours (NC ON), Max. 7 hours (Ambient Sound Mode), Max. 8 hours (NC OFF) Standby time: Max. 15 hours (NC ON), Max. 15 hours (Ambient Sound Mode), Max. 35 hours (NC OFF) Note: Usage hours may be shorter depending on the Codec and the conditions of use.
Charging time: Approx. 2.5 hours (Headset) (About 60 minutes of music playback is possible after 10 minutes charging.) Approx. 3 hours (Charging case) Note: Charging and usage hours may be different depending on the conditions of use.
Charging temperature: 5°C to 35°C
Mass: Approx. 9.8 g × 2 (Headset (including arc supporters (M), earbuds (M))) Approx. 59 g (Charging case)
Included items:

Communication specification

Communication system: Bluetooth Specification version 5.0
Output: Bluetooth Specification Power Class 1
Maximum communication range: Line of sight approx. 10 m1)
Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Operating frequency: Bluetooth: 2,400 MHz - 2,483.5 MHz
Maximum output power: Bluetooth: < 10 dBm
Compatible Bluetooth profiles2): A2DP / AVRCP / HFP / HSP
Supported Codec3):SBC / AAC
Transmission range (A2DP): 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)

1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerial's performance, operating system, software application, etc.

2) Bluetooth standard profiles indicate the purpose of Bluetooth communications between devices.

3) Codec: Audio signal compression and conversion format Design and specifications are subject to change without notice.

System requirements for battery charge using USB

USB AC adaptor: A commercially available USB AC adaptor capable of supplying an output current of 0.5 A (500 mA) or more

Compatible iPhone/iPod models

Trademarks

Apple, iPhone, iPod and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Android is a trademark of Google LLC.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license.

USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

Other trademarks and trade names are those of their respective owners.

Notes on the License

This product contains software that Sony uses under a licensing agreement with the owner of its copyright. We are obligated to announce the contents of the agreement to customers under requirement by the owner of copyright for the software.

Please access the following URL and read the contents of the license. https://rd1.sony.net/help/mdr/sl/20/

Disclaimer regarding services offered by third parties

Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.

Compliance Information

This equipment has been tested and found to comply with the limits set out in the EMC regulation using a connection cable shorter than 3 meters.

Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives and/or UK applying relevant statutory requirements

This product has been manufactured by or on behalf of Sony Corporation.

EU and UK Importer: Sony Europe B.V.

Inquiries to the EU Importer or related to product compliance in Europe should be sent to the manufacturer's authorized representative, Sony Belgium, bijkantoor van Sony Europe B.V., Da Vincilaan 7-D1, 1930 Zaventem, Belgium.

Inquiries to the UK Importer or related to product compliance in the UK should be sent to the manufacturer's authorized representative, Sony Europe B.V., The Heights, Brooklands, Weybridge, Surrey KT13 0XW, United Kingdom.

Hereby, Sony Corporation declares that this equipment is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://www.compliance.sony.de/

Hereby, Sony Corporation declares that this equipment is in compliance with the UK relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: https://compliance.sony.co.uk


Disposal of waste batteries and electrical and electronic equipment (applicable in the European Union and other countries with separate collection systems)

This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbol for lead (Pb) is added if the battery contains more than 0.004% lead. By ensuring that these products and batteries are disposed of correctly, you will help to prevent potentially negative consequences for the environment and human health which could be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at end-of-life to the appropriate collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the appropriate collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product or battery.

The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area) and Switzerland.

https://rd1.sony.net/help/mdr/wfsp800n/h_zz/

©2020 Sony Corporation
Printed in Malaysia
https://www.sony.net/

Videos

WF-SP800N - Pairing video

WF-SP800N - How to use gesture control (video)

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Table of Contents