Related Manuals for Bosch 7738003218
Summary of Contents for Bosch 7738003218
- Page 1 Greenstar Concentric Horizontal Vent Kit FOR BOSCH GREENSTAR HEATING BOILERS AND BOSCH GREENSTAR COMBI BOILERS Installation Instructions...
- Page 2 2 | Concentric Horizontal Vent Kit Installation Manual Data subject to change Bosch Thermotechnology Corp.
-
Page 3: Table Of Contents
1.1 Key To Symbols 1.2 Safety Instructions 2 Scope Of Delivery 3 Installation 3.1 Notes On Installation 3.2 Appliance Adapter 3.3 Elbow and Wall Termination 3.4 Redirecting The Vent Discharge 4 Spare Parts Bosch Thermotechnology Corp. Data subject to change... -
Page 4: Explanation Of Symbols
Never close off or reduce the size of the air intake and outlet openings. The appliance must not be operated until any obstructions have been removed. Inform the system operator in writing of the problem and the associated dangers. Data subject to change Bosch Thermotechnology Corp. - Page 5 Keep the combustion air free of corrosive substances The concentric horizontal vent terminal is intended for (halogenated hydrocarbons that contain chlorine or installation only with the Bosch Greenstar and Bosch fluorine compounds). Greenstar combi boilers (hereafter referred to as "appliance"):...
-
Page 6: Scope Of Delivery
6 | Concentric Horizontal Vent Kit Installation Manual 2 Scope Of Delivery The Bosch Greenstar Concentric Vent Kit comes packaged in two separate boxes as described below. Box 1 components 2.5" 1.6" 0.4" 87° Ø3.2" Ø5.0" [81] [127] (I.D.) (I.D.) (I.D.) -
Page 7: Installation
If this is not feasible, this termination can not be used. Needed Tools: - Hole saw - Tape measure - Phillips screw driver - Drinking water (as lubricant for gaskets) - Weatherproof caulk Bosch Thermotechnology Corp. Data subject to change... -
Page 8: Appliance Adapter
[2]. 13³/₁₆" - 20⅞"(335 - 530mm) Fig. 5 Installing elbow While the screws are not fully tightened, the appliance Fig. 7 adapter can be swivelled around its vertical axis. Data subject to change Bosch Thermotechnology Corp. - Page 9 Fig. 8 Position terminal [1] from the outside through the vent opening so rubber thimble [2] is flush against outside wall . Slide the inner wall seal [3] onto the terminal [1] as shown. Bosch Thermotechnology Corp. Data subject to change...
-
Page 10: Redirecting The Vent Discharge
Rotate the terminal end [B] 180° so discharge faces upwards. Refit the terminal end [B] and tighten the screws [A]. 180° Fig. 12 The entire termination can now be rotated left or right ±40° to redirect the plume ( Fig. 13). Data subject to change Bosch Thermotechnology Corp. -
Page 11: Spare Parts
7738003241 Elbow PP 80/125 90° 7738003242 Elbow PP 80/125 45° 7738003243 Seal EPDM 80 7738003244 Seal EPDM 125 7738003245 To purchase additional concentric pipe lengths and fittings, please contact Bosch Customer Service 1-866-642-3198. Bosch Thermotechnology Corp. Data subject to change... - Page 12 United States and Canada Bosch Thermotechnology Corp. 50 Wentworth Avenue Londonderry, NH 03053 Tel: 866-642-3198 Fax: 603-965-7581 www.boschheatingandcooling.com BTC 436001102 B / 02.2017...