Panasonic 6362 Quick Start Manual

Rope elevator kit 6362



A kit with all the necessary pieces for a rope elevator.

General

6362 is a kit to make a rope elevator for a

detector and its base, e.g. detector 3304 and

analog base 3312.

The kit

The kit consists of the following:



Protective cover for detector (6360)



Cleat (to fix the rope & hang it up;

not shown in the figure above)



20 m rope (Ø2 mm polyester)



Metal plate



Two screws (to fix the base)



Two loop screws (for the rope)



Two wood screws (to fix the cleat)



Connection box (five screw term.)



Cable clamp (for the conn. box)



Rope clamp (to fix the rope)



Cable clamp (to fix the cable)

Panasonic Eco Solutions Nordic AB

Jungmansgatan 12, SE-211 19 Malmö, Sweden

Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99

E-mail: [email protected] • Internet: pesn.panasonic.se

Fire alarm system

Product applications

The rope elevator is used with any of the

Panasonic heat or smoke detectors plugged

in a base, allowing the user to access a

detector mounted on a high ceiling height, in

order to perform a test, maintenance, replace

the detector, etc.