Black & Decker LP1000 Instruction Manual
  1. Manuals
  2. Brands
  3. Black & Decker Manuals
  4. Power Tool
  5. Alligator LP1000
  6. Instruction manual

Black & Decker LP1000 Instruction Manual

Alligator lopper
Hide thumbs Also See for LP1000:
Table of Contents

Quick Links

alligator lopper
INSTRUCTION MANUAL
Catalog Number
LP1000
KEY INFORMATION YOU SHOULD KNOW:
• DO NOT OVER-TENSION CHAIN. Refer to "Chain Tension ADJUSTMENT" for proper method of tensioning chain.
• Retighten chain frequently during first two hours of use as chain breaks in.
Thank you for choosing Black & Decker!
PLEASE READ BEFORE RETURNINg THIS PRODUCT FOR ANY REASON.
SAvE THIS MANUAL FOR FUTURE REFEREANCE.
1
Table of Contents
loading

Related Manuals for Black & Decker LP1000

Summary of Contents for Black & Decker LP1000

  • Page 1 INSTRUCTION MANUAL Catalog Number LP1000 KEY INFORMATION YOU SHOULD KNOW: • DO NOT OVER-TENSION CHAIN. Refer to “Chain Tension ADJUSTMENT” for proper method of tensioning chain. • Retighten chain frequently during first two hours of use as chain breaks in.

  • Page 2: Safety Guidelines - Definitions

    c. Keep children and bystanders away while operating a power tool. SAFETY GUIDELINES - DEFINITIONS Distractions can cause you to lose control. It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and 2.
  • Page 3 b. Use safety equipment. Always wear eye protection. Safety application. The correct power tool will do the job better and safer at the equipment such as dust mask, non-skid safety shoes, hard hat, rubber rate for which it was designed. gloves, snug-fitting clothing or hearing protection used for appropriate b.
  • Page 4 stops moving when the trigger is released. - The natural lean of the branch. - Any unusual heavy limb structure or decay. i. Use extreme caution when cutting small size brush and saplings - Surrounding trees and obstacles including overhead lines. because the slender material may catch the saw chain and be - The wind speed and direction.
  • Page 5 intended - for example - Don’t use tool for cutting plastic, masonry or non- Reduced Kickback Chain - Designed with a contoured depth gauge and wood building materials. guard link which deflect kickback force and allows wood to gradually ride - If any debris gets caught with the guard or tool discontinue use, into the cutter.
  • Page 6 REPLACEMENT PARTS: When servicing all tools, USE IDENTICAL Extension Cord REPLACEMENT PARTS. Repair or replace damaged cords. WARNING: To reduce the risk of electric shock use only with an CAN/CSA-C22.2 NO. 60745-1-07 ♦ UL 60745-1 extension cord intended for outdoor use, such as SW-A, S0W-A, STW-A, Polarized Plugs STOW-A, SJW-A, SJOW-A, SJTW-A or SJTOW-A.

  • Page 7: Chain Saw Names And Terms

    • Reduced Kickback Guide Bar - A guide bar which has been CHAIN SAW NAMES AND TERMS demonstrated to reduce kickback significantly. • Bucking - The process of cross cutting a felled tree or log into • Replacement Saw Chain - A chain that complies with kickback lengths.

  • Page 9: Functional Description

    Functional Description 1. Oil Bottle 2. Wrench 3. Instruction Manual 4. Alligator Lopper 5. On/off switch actuators 6. Top jaw 7. Lower jaw 8. Chain guide bar 9. Chipping ejection point 10. Oiling cover...
  • Page 10 Low-Kickback saw chain is a chain which has met the kickback Preparing Your Alligator Lopper For Use performance requirements of ANSI B175.1 when tested on the WARNING: Read and understand all instructions. Failure to follow all representative sample of chain saws. instructions listed below may result in electric shock, fire and/or serious Removing the saw chain &...

  • Page 11: Operation

    Pull the chain bar and chain back, engaging it in the groove in the chain - The hole feeds the oil through to the chain onto the chain bar and bar and then over the sprocket (14) positioning teeth in the correct an excessive amount of oil applied to the unit could mean the oil drips position on the sprocket.

  • Page 12: Troubleshooting Section

    Troubleshooting Section Maintenance Your Black & Decker tool has been designed to operate over a long If your saw does not operate correctly check the following: period of time with a minimum of maintenance. Continuous satisfactory Problem Possible Cause Possible Solution operation depends upon proper tool care and regular cleaning.

Table of Contents