Cisco 700 MHz Installation And Upgrade Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Server
  5. 700 series
  6. Installation and upgrade manual
Cisco 700 MHz Installation And Upgrade Manual

Cisco 700 MHz Installation And Upgrade Manual

Audio server
Hide thumbs Also See for 700 MHz:
Table of Contents

Quick Links

See also: Configuration Manual, User Manual
Enlarged version
Installation and Upgrade Guide
for Cisco Unified MeetingPlace
Audio Server
Release 6.x
Published May 31, 2007
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-13417-01
Table of Contents
loading

Related Manuals for Cisco 700 MHz

Summary of Contents for Cisco 700 MHz

  • Page 1 Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server Release 6.x Published May 31, 2007 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-13417-01...
  • Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. CCVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.;...

  • Page 3: Table Of Contents

    Preface Purpose Audience Naming Conventions Documentation Conventions Cisco Unified MeetingPlace Documentation New Feature and Enhancement Information Obtaining Documentation, Obtaining Support, and Security Guidelines Preparing to Install the Cisco Unified MeetingPlace 8100 Series Hardware C H A P T E R Safety Warnings Hardware Requirements Tools Required for the Installation...
  • Page 4 Contents Mounting the Cisco Unified MeetingPlace 8112 into a 19- or 23-Inch EIA Equipment Rack Mounting the Breakout Box for T1 PRI and E1 Cisco Unified MeetingPlace Systems Connecting the Cables to the Cisco Unified MeetingPlace 8100 Series Connecting the Power Cable to the Cisco Unified MeetingPlace 8100 Series Connecting the SCSI Cable to the Cisco Unified MeetingPlace 8112 Connecting the LAN Cable to the Cisco Unified MeetingPlace 8100 Series Connecting T1 CAS Telephony Cables for a Cisco Unified MeetingPlace 8106...
  • Page 5 Testing Inbound Calls for T1 CAS, T1 PRI, and E1 Telephony by Using a Dialing Sequence Testing Outbound Calls for T1 CAS, T1 PRI, and E1 Telephony Testing Scheduling Testing Conferencing in Recorded Meetings Testing Conferencing in Nonrecorded Meetings with Ad Hoc Recording Testing Cisco Unified MeetingPlace Web Conferencing Testing Network Latency Maintaining the Cisco Unified MeetingPlace Audio Server System...
  • Page 6 Contents Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x OL-13417-01...

  • Page 7: Naming Conventions

    Preface This preface contains the following sections: • Purpose, page vii • Audience, page vii • Documentation Conventions, page ix • Cisco Unified MeetingPlace Documentation, page x • New Feature and Enhancement Information, page x Obtaining Documentation, Obtaining Support, and Security Guidelines, page x •...
  • Page 8 Table 1 Product Naming Conventions Term Definition Cisco Unified Includes Cisco Unified MeetingPlace 8106 and MeetingPlace 8100 series Cisco Unified MeetingPlace 8112 servers. server Cisco Unified Hardware on which Cisco Unified MeetingPlace 8106 Server MeetingPlace Audio Server software runs. Cisco Unified Hardware on which Cisco Unified MeetingPlace 8112 Server MeetingPlace Audio Server software runs.

  • Page 9: Documentation Conventions

    Preface Documentation Conventions Table 3 Convention boldfaced text italicized text (square brackets) text in Courier font Used for information that appears on the screen. (caret) < > (angle brackets) Cisco Unified MeetingPlace documentation also uses the following conventions: Means reader take note. Notes contain helpful suggestions or references to material not covered in the Note document.
  • Page 10 Cisco Unified MeetingPlace Documentation For descriptions and locations of Cisco Unified MeetingPlace documentation on Cisco.com, see the Documentation Guide for Cisco Unified MeetingPlace. The document is shipped with Cisco Unified MeetingPlace and is available at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_documentation_roadmaps_list.htm New Feature and Enhancement Information For information on new and changed functionality in Cisco Unified MeetingPlace Audio Server, refer to Release Notes for Cisco Unified MeetingPlace Audio Server at http://www.cisco.com/en/us/products/sw/ps5664/ps5669/prod_release_notes_list.html.
  • Page 11 Preparing to Install the Cisco Unified MeetingPlace 8100 Series Hardware This chapter describes the requirements and hardware specifications for a Cisco Unified MeetingPlace 8100 series server. To ensure that the Cisco Unified MeetingPlace configuration integrates within your environment, refer to the configuration worksheets in the Installation Planning Guide for Cisco Unified MeetingPlace Release 6.0 at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html.

  • Page 12: C H A P T E R 1 Preparing To Install The Cisco Unified Meetingplace 8100 Series Hardware

    Safety Warnings Safety Warnings Read the following safety warnings before you begin installing the Cisco Unified MeetingPlace Audio Server system. Translations of the warnings are available online in Regulatory Compliance and Safety Information for Cisco MeetingPlace 8100 Series at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html. Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable.

  • Page 13: Hardware Requirements

    Chapter 1 Preparing to Install the Cisco Unified MeetingPlace 8100 Series Hardware Blank faceplates and cover panels serve three important functions: they prevent exposure to Warning hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place.

  • Page 14: Tools Required For The Installation

    Laptop computer. • Null modem female to female DB9 serial cable. Cisco Systems provides this cable. (For details, see • “Connecting Your Laptop to Cisco Unified MeetingPlace” section on page Screwdriver with a type #2 blade.

  • Page 15: Environmental Requirements For The Cisco Unified Meetingplace 8112

    Chapter 1 Preparing to Install the Cisco Unified MeetingPlace 8100 Series Hardware Environmental Requirements for the Cisco Unified MeetingPlace 8112 The recommended operating temperature range for the Cisco Unified MeetingPlace 8112 is 50 to 104 degrees Fahrenheit with a noncondensing humidity of 5 to 80 percent. It is essential to keep the Cisco Unified MeetingPlace 8112 equipment cool.

  • Page 16: T1 Digital Trunk Requirements For Cisco Unified Meetingplace Systems

    T1 Digital Trunk Requirements for Cisco Unified MeetingPlace Systems Table 1-1 Country U.S. Canada Hong Kong European Union Japan T1 Digital Trunk Requirements for Cisco Unified MeetingPlace Systems T1 Smart Blades support digital connections to a PBX system or to a public switched phone network (PSTN).

  • Page 17: T1-Supported Protocols For Cisco Unified Meetingplace Systems

    Hong Kong Japan Australia In some cases, the cables that Cisco Systems provides may not be appropriate for your Private Branch eXchange (PBX) or Network Interface Unit (NIU) side connections. If this is the case, create your own custom cables.
  • Page 18 T1-Supported Protocols for Cisco Unified MeetingPlace Systems End-to-end positive disconnect supervision is essential. Without it, Cisco Unified MeetingPlace cannot reliably tell when a caller hangs up. Many PBX and central office systems can provide disconnect signaling; we recommend E&M wink start lines because they provide for a positive answer and disconnect supervision.

  • Page 19: Wiring Requirements For Customer-Supplied Connectors—U.s., Canada, And Hong Kong

    Chapter 1 Preparing to Install the Cisco Unified MeetingPlace 8100 Series Hardware Wiring Requirements for Customer-Supplied Connectors—U.S., Canada, and Hong Kong Table 1-3 Table 1-3 To identify the pins, hold the RJ-48 connector as if you are going to plug it in with the tab down. Pin 1 is on the left.

  • Page 20: E1 Digital Trunk Requirements For Cisco Unified Meetingplace Systems

    European Union Australia In some cases, the RJ-48c cables that Cisco Systems provides may not be appropriate for your PBX or NIU-side connections. If this is the case, create your own custom cables. Custom E1 and T1 PRI cables require the following: Cat5e UTP cable.

  • Page 21: Modem Requirements For Cisco Unified Meetingplace Systems

    RJ-45 connectors Special 23 ft cable shipped with unit T1 Smart Blade Modem Requirements by Country Requirements U.S. modem supplied by Cisco Systems. • Serial cable. • 6-foot modem cable. • Customer-supplied standard analog phone jack (RJ-11). You must be able •...

  • Page 22: Lan Requirements For Cisco Unified Meetingplace Systems

    Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x 1-12 Chapter 1 Preparing to Install the Cisco Unified MeetingPlace 8100 Series Hardware Modem Requirements by Country (continued) Requirements CE modem supplied by Cisco Systems. • Serial cable. • 8.2-foot modem cable. •...

  • Page 23: Lan Cable Requirements For Cisco Unified Meetingplace Systems

    For all configurations, you need a customer-supplied LAN cable to connect the Audio Server CPU to your network. For IP configurations, Cisco Systems supplies the necessary LAN cables to connect the Multi Access Blade that is used for the IP configuration to your network.
  • Page 24 Chapter 1 Preparing to Install the Cisco Unified MeetingPlace 8100 Series Hardware LAN Cable Requirements for Cisco Unified MeetingPlace Systems Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x 1-14 OL-13417-01...

  • Page 25: Contents Of Shipped Boxes For The Cisco Unified Meetingplace Audio Server System

    Unified MeetingPlace Audio Server and its accessories. The other box contains the telephony cables, modem and modem cables, and the breakout box and cables, if applicable. Cisco Systems provides the correct number of telephony cables for the Cisco Unified MeetingPlace system: The number of IP LAN cables that you receive depends on the number of ports that were purchased •...

  • Page 26: C H A P T E R 2 Installing The Cisco Unified Meetingplace 8100 Series Hardware

    Cisco Unified MeetingPlace system. Applicable software, manuals, and license documents. • In addition, Cisco Systems ships the following items with Cisco Unified MeetingPlace systems requiring a breakout box (T1 PRI or E1 configuration): Breakout box.

  • Page 27: Mounting The Cisco Unified Meetingplace 8100 Series

    • interface cable assemblies that you receive depends on how many and the type of Multi Access Blades in the Cisco Unified MeetingPlace system. Cisco Systems ships two cables with each MP-MA-16-PRI and one cable with each MP-MA-4-PRI. Mounting the Cisco Unified MeetingPlace 8100 Series...

  • Page 28: Mounting The Cisco Unified Meetingplace 8112 In A 19- Or 23-Inch Frame-Relay Rack

    Mounting the Cisco Unified MeetingPlace 8100 Series Attach the Cisco Unified MeetingPlace 8106 to the rack. The Cisco Unified MeetingPlace 8106 comes Step 2 with screws to attach the mounting brackets to the rack. See Figure 2-1 Mounting the Cisco Unified MeetingPlace 8112 in a 19- or 23-Inch Frame-Relay Rack To Mount the Cisco Unified MeetingPlace 8112 in a 19- or 23-Inch Frame-Relay Rack Attach two mounting brackets to the front mounting holes of the Cisco Unified MeetingPlace 8112.

  • Page 29: Mounting The Cisco Unified Meetingplace 8106 In A 19-Inch Eia Equipment Rack

    Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware Figure 2-2 OUT OF SERVI CE OUT OF SERVI CE OUT OF OUT OF OUT OF SERVI CE OUT OF SERVI CE SERVI CE OUT OF SERVI CE OUT OF SERVI CE OUT OF SERVI CE...

  • Page 30: Mounting The Cisco Unified Meetingplace 8112 Into A 19- Or 23-Inch Eia Equipment Rack

    Mounting the Cisco Unified MeetingPlace 8100 Series Figure 2-3 Mounting the Cisco Unified MeetingPlace 8112 into a 19- or 23-Inch EIA Equipment Rack In a 19- or 23-inch EIA equipment rack, you mount the Cisco Unified MeetingPlace 8112 on the front rails.

  • Page 31: Mounting The Breakout Box For T1 Pri And E1 Cisco Unified Meetingplace Systems

    Cisco Systems ships the necessary number of RJ-48c cables to connect each breakout box to your PBX or Telco NIU with each Multi Access Blade. In some cases, the RJ-48c cables provided by Cisco Systems may not be appropriate for your PBX or Note NIU side connections.
  • Page 32 Mounting the Cisco Unified MeetingPlace 8100 Series To Mount the Breakout Box for a T1 PRI or E1 Cisco Unified MeetingPlace System Step 1 Locate the breakout box that shipped with the Cisco Unified MeetingPlace Audio Server. Step 2 Locate the screws for mounting the breakout box that came with the Cisco Unified MeetingPlace Audio Server.
  • Page 33 Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware Mounting the Cisco Unified MeetingPlace 8100 Series Figure 2-6 Mounting the Breakout Box for a Cisco Unified MeetingPlace 8112 Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x OL-13417-01...

  • Page 34: Connecting The Cables To The Cisco Unified Meetingplace 8100 Series

    Connecting the Cables to the Cisco Unified MeetingPlace 8100 Series Figure 2-7 Connecting the Cables to the Cisco Unified MeetingPlace 8100 Series This section contains the following information: • Connecting the Power Cable to the Cisco Unified MeetingPlace 8100 Series, page 2-11 Connecting the SCSI Cable to the Cisco Unified MeetingPlace 8112, page 2-11 •...

  • Page 35: Connecting The Power Cable To The Cisco Unified Meetingplace 8100 Series

    Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware Connecting the Power Cable to the Cisco Unified MeetingPlace 8100 Series This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the Warning absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.

  • Page 36: Connecting T1 Cas Telephony Cables For A Cisco Unified Meetingplace 8106

    Slot 2 Slot 1 The number of T1 CAS telephony cables that Cisco Systems ships with the Cisco Unified MeetingPlace system depends on the number of ports being activated. Cisco Systems ships one T1 CAS telephony cable for every 24 ports.

  • Page 37: Connecting T1 Cas Telephony Cables For A Cisco Unified Meetingplace 8112

    Connector Connector Connector The number of T1 CAS telephony cables that Cisco Systems ships with the Cisco Unified MeetingPlace system depends on the number of ports being activated. Cisco Systems ships one T1 CAS telephony cable for every 24 ports.
  • Page 38 Connecting the Cables to the Cisco Unified MeetingPlace 8100 Series Figure 2-9 To Connect the T1 CAS Telephony Cables for a Cisco Unified MeetingPlace 8112 Locate the T1 CAS telephony cables that shipped with the Cisco Unified MeetingPlace system. Each T1 Step 1 CAS telephony cable has an RJ-48 connector on each end.

  • Page 39: About Telephony Configurations For E1 And T1 Pri Cisco Unified Meetingplace Systems

    About Telephony Configurations for E1 and T1 PRI Cisco Unified MeetingPlace Systems Cisco Systems ships the necessary number of Multi Access Blades with all Cisco Unified MeetingPlace Audio Server systems with E1 and T1 PRI configurations. A Cisco Unified MeetingPlace 8106 supports...
  • Page 40 Figure 2-10 50-Pin Amphenol Cable Cisco Systems ships the necessary number of E1 or T1 PRI telephony cables with the Cisco Unified MeetingPlace Audio Server system. The number depends on the number of ports being activated. You receive one E1 telephony cable for every 30 ports in an E1 Cisco Unified MeetingPlace system, and one T1 PRI telephony cable for every 23 ports in a T1 PRI Cisco Unified MeetingPlace system.
  • Page 41 Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware About Telephony Configurations for E1 and T1 PRI Cisco Unified MeetingPlace Systems Figure 2-11 shows the cable connections for a Cisco Unified MeetingPlace 8106 with 480 E1 ports. Figure 2-11 Front of Cisco Unified MeetingPlace 8106 with Cables Connected Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x 2-17...
  • Page 42 About Telephony Configurations for E1 and T1 PRI Cisco Unified MeetingPlace Systems Figure 2-12 shows the cable connections for a Cisco Unified MeetingPlace 8112 with 480 E1 ports. Figure 2-12 See the applicable section for your configuration: • Connecting E1 or T1 PRI Telephony Cables with One Multi Access Blade MP-MA-16-PRI, page 2-19 •...

  • Page 43: Connecting E1 Or T1 Pri Telephony Cables With One Multi Access Blade Mp-Ma-16-Pri

    Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware Connecting E1 or T1 PRI Telephony Cables with One Multi Access Blade MP-MA-16-PRI To Connect the E1 or T1 PRI Telephony Cables with One Multi Access Blade MP-MA-16-PRI Step 1 Locate the following items shipped with the Cisco Unified MeetingPlace Audio Server: E1 or T1 PRI telephony cables.
  • Page 44 About Telephony Configurations for E1 and T1 PRI Cisco Unified MeetingPlace Systems Figure 2-15 For the Cisco Unified MeetingPlace 8112, the connector on the top of the Multi Access Blade transition module is for spans 1 to 8 and the connector on the bottom of the Multi Access Blade transition module is for spans 9 to 16.
  • Page 45 Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware Repeat Step 5 Step 7 For the Cisco Unified MeetingPlace 8106, place the second trunk card cable assembly into the connectors on the left of the breakout box and on the left of the Multi Access Blade. For the Cisco Unified MeetingPlace 8112, place the second trunk card cable assembly into the connectors on the left of the breakout box and on the bottom of the Multi Access Blade.
  • Page 46 About Telephony Configurations for E1 and T1 PRI Cisco Unified MeetingPlace Systems Figure 2-18 Figure 2-19 shows the connections on the back of a Cisco Unified MeetingPlace 8106. This configuration supports 368 T1 PRI ports with one Multi Access Blade card MP-MA-16-PRI. Figure 2-19 Figure 2-20 shows the connections on the back of a Cisco Unified MeetingPlace 8112.

  • Page 47: Connecting E1 Or T1 Pri Telephony Cables With One Multi Access Blade Mp-Ma-4-Pri

    Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware Figure 2-20 Connecting E1 or T1 PRI Telephony Cables with One Multi Access Blade MP-MA-4-PRI To Connect E1 or T1 PRI Telephony Cables with One Multi Access Blade MP-MA-4-PRI Locate the following items that shipped with the Cisco Unified MeetingPlace Audio Server: Step 1 •...

  • Page 48: Connecting E1 Or T1 Pri Telephony Cables With Two Multi Access Blade Mp-Ma-4-Pris

    About Telephony Configurations for E1 and T1 PRI Cisco Unified MeetingPlace Systems Attach the far end of the first E1 or T1 PRI telephony cable to the equipment that will connect with Cisco Step 2 Unified MeetingPlace. In many cases, the other equipment has an RJ-48c socket in which to plug the E1 or T1 PRI telephony cable.

  • Page 49: Multi Access Blade Mp-Ma-4-Pri

    Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware Repeat Step 2 Step 4 Place the second, third, and fourth E1 or T1 PRI telephony cables, which correspond to the first MP-MA-4-PRI, into the RJ-45 jacks labeled 2, 3, and 4. Place the second set of four E1 or T1 PRI telephony cables, which corresponds to the second MP-MA-4-PRI, into the RJ-45 jacks labeled 9, 10, 11, and 12.

  • Page 50: Connecting E1 Or T1 Pri Telephony Cables With Two Multi Access Blade Mp-Ma-16-Pris

    About Telephony Configurations for E1 and T1 PRI Cisco Unified MeetingPlace Systems Attach the far end of the first E1 or T1 PRI telephony cable to the equipment that will connect with Cisco Step 2 Unified MeetingPlace. In many cases, the other equipment has an RJ-48c socket in which to plug the E1 or T1 PRI telephony cable.

  • Page 51: About Telephony Configurations For Ip Cisco Unified Meetingplace Systems

    Pure IP Cisco Unified MeetingPlace systems do not use a breakout box. Cisco Systems ships the necessary number of IP LAN cables with the Cisco Unified MeetingPlace Audio Server. The number of IP LAN cables that you receive depends on the number of Multi Access Blades in the Cisco Unified MeetingPlace system.

  • Page 52: Connecting Ip Telephony Cables For Cisco Unified Meetingplace Systems

    About Telephony Configurations for IP Cisco Unified MeetingPlace Systems Connecting IP Telephony Cables for Cisco Unified MeetingPlace Systems To Connect IP Telephony Cables for a Cisco Unified MeetingPlace System Step 1 Locate the IP LAN cables that shipped with the Cisco Unified MeetingPlace Audio Server. Step 2 Attach the far end of the first IP LAN cable to the RJ-45 socket of the switch or other network equipment.
  • Page 53 Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware Figure 2-22 Figure 2-23 shows the connections on the back of a Cisco Unified MeetingPlace 8106. This configuration supports 120 IP ports with one MP-MA-4. Figure 2-23 Figure 2-24 shows the connections on the back of a Cisco Unified MeetingPlace 8112. This configuration supports 120 IP ports with one MP-MA-4.

  • Page 54: About Telephony Configurations For Mixed Cisco Unified Meetingplace Systems

    About Telephony Configurations for Mixed Cisco Unified MeetingPlace Systems Figure 2-24 About Telephony Configurations for Mixed Cisco Unified MeetingPlace Systems A mixed Cisco Unified MeetingPlace system is a Cisco Unified MeetingPlace Audio Server system with both an IP configuration and a T1 CAS, T1 PRI, or E1 configuration. Mixing protocols is supported only in combination with IP ports: •...
  • Page 55 For All Mixed Configurations E1, T1 PRI, and IP configurations all use Multi Access Blades. Cisco Systems ships the necessary number of Multi Access Blades with the Cisco Unified MeetingPlace Audio Server system. The number of telephony cables you receive depends on the number of ports being activated.

  • Page 56: Connecting The Telephony Cables For An E1/Ip Or T1 Pri/Ip Cisco Unified Meetingplace System

    About Telephony Configurations for Mixed Cisco Unified MeetingPlace Systems Connecting the Telephony Cables for an E1/IP or T1 PRI/IP Cisco Unified MeetingPlace System To Connect the Telephony Cables for an E1/IP or T1 PRI/IP Cisco Unified MeetingPlace System Step 1 Locate the following items that shipped with the Cisco Unified MeetingPlace Audio Server: IP LAN cables.
  • Page 57 Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware Two MP-MA-4s are used for the IP configuration and are in slots 15 and 16, shown on the left. For the T1 CAS configuration, there is a T1 Smart Blade in slot 1 and three Smart Blades in slots 2, 3, and 4.
  • Page 58 About Telephony Configurations for Mixed Cisco Unified MeetingPlace Systems Figure 2-27 Figure 2-28 shows the connections on the back of a Cisco Unified MeetingPlace 8112 with a mixed Cisco Unified MeetingPlace system with 480 E1 ports and 480 IP ports. The MP-MA-16 that is used for the IP configuration is shown on the left in slot 16.

  • Page 59: Connecting The Telephony Cables For A T1 Cas/Ip Cisco Unified Meetingplace System

    Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware Figure 2-28 Connecting the Telephony Cables for a T1 CAS/IP Cisco Unified MeetingPlace System To Connect the Telephony Cables for a T1 CAS/IP Cisco Unified MeetingPlace System Locate the following items that shipped with the Cisco Unified MeetingPlace Audio Server: Step 1 IP LAN cables.

  • Page 60: Installing And Connecting The Modem

    Installing and Connecting the Modem Plug the other end of the first T1 CAS telephony cable into the T1 Smart Blade transition module in the Step 3 back of the Cisco Unified MeetingPlace Audio Server. For the Cisco Unified MeetingPlace 8106, place the first T1 CAS telephony cable in the left most connector slot.
  • Page 61 Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware Looking at the back of the Cisco Unified MeetingPlace Audio Server, connect the DB25 end (the larger Step 7 connector) of the modem cable to the back of the modem. See end.
  • Page 62 Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware Installing and Connecting the Modem Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x 2-38 OL-13417-01...

  • Page 63: Connecting Your Laptop To Cisco Unified Meetingplace

    Connecting and Setting Up Your Laptop Computer This chapter explains how to connect your laptop to the Cisco Unified MeetingPlace system and how to set up your laptop so that you can use HyperTerminal. This chapter contains the following sections: •...

  • Page 64: C H A P T E R 3 Connecting And Setting Up Your Laptop Computer

    About Configuring Your Laptop Figure 3-1 Step 2 Connect one end of the null modem cable to the COM 1 port on the CPU card in the front of the Cisco Unified MeetingPlace Audio Server. Step 3 Connect the other end of the null modem cable to the COM port on your laptop. About Configuring Your Laptop You can access the Command Line Interface (CLI) command screen by running terminal emulation software, such as ProComm, Windows Terminal, or HyperTerminal.

  • Page 65: Setting Up Hyperterminal

    Chapter 3 Connecting and Setting Up Your Laptop Computer Setting Up HyperTerminal This section explains how to set up HyperTerminal to telnet to the Cisco Unified MeetingPlace system. There are several ways to telnet to the Cisco Unified MeetingPlace system. HyperTerminal is available on all operating systems.

  • Page 66: Setting Up Dial-Up Networking

    Setting Up Dial-Up Networking Setting Up Dial-Up Networking This section explains how to set up dial-up networking on a Microsoft Windows 2000 operating system to connect to the Cisco Unified MeetingPlace Audio Server system by using a modem. To Set Up Dial-Up Networking On the Windows 2000 system, right-click the My Network Places icon on the desktop.
  • Page 67 Chapter 3 Connecting and Setting Up Your Laptop Computer Select Properties. The Network and Dial-up Connections window appears. Step 2 Double-click the connection that you just created. Step 3 Click Dial. Step 4 OL-13417-01 Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x Testing the Modem Connection...
  • Page 68 Chapter 3 Connecting and Setting Up Your Laptop Computer Testing the Modem Connection Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x OL-13417-01...

  • Page 69: Chapter 4 Upgrading The Cisco Unified Meetingplace Audio Server Software

    Upgrading the Cisco Unified MeetingPlace Audio Server Software This chapter describes how to upgrade the Cisco Unified MeetingPlace Audio Server software from Release 5.3 or 5.4 to Release 6.0 and contains the following sections: • Upgrading the Cisco Unified MeetingPlace Audio Server Software to Release 6.0, page 4-1 Testing the Upgrade, page 4-3 •...

  • Page 70: Upgrading The Cisco Unified Meetingplace Audio Server Software To Release 6.0

    Upgrading the Cisco Unified MeetingPlace Audio Server Software to Release 6.0 The default username is admin, and the default password is cisco. Note Shut down the Cisco Unified MeetingPlace Audio Server software by entering down. Step 5 Note the current time. Step 6 Save the session capture to your desktop with the filename upgrade.txt.

  • Page 71: Testing The Upgrade

    Chapter 4 Upgrading the Cisco Unified MeetingPlace Audio Server Software When Phase 2 is complete, the modem connection terminates. After approximately 5 minutes, the Cisco Unified MeetingPlace Audio Server system comes back up and you can re-establish a modem connection. To view the upgrade status, enter update status.
  • Page 72 Chapter 4 Upgrading the Cisco Unified MeetingPlace Audio Server Software Testing the Upgrade Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x OL-13417-01...

  • Page 73: Powering Up The Cisco Unified Meetingplace Audio Server System

    Testing the Cisco Unified MeetingPlace Audio Server System Installation and Upgrade This chapter explains how to power up the Cisco Unified MeetingPlace Audio Server and how to test the installation and upgrade. It contains the following sections: • Powering Up the Cisco Unified MeetingPlace Audio Server System, page 5-1 About Testing the Cisco Unified MeetingPlace Audio Server System Installation or Upgrade, •...

  • Page 74: About Testing The Cisco Unified Meetingplace Audio Server System Installation Or Upgrade

    Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x Chapter 5 Testing the Cisco Unified MeetingPlace Audio Server System Installation and Upgrade “Obtaining Documentation, Obtaining Support, and Security Guidelines” MeetingPlace(tm) by Cisco Systems Copyright (c) 1993-2006 Cisco Systems, Inc. All rights reserved. S/N: not set OL-13417-01...

  • Page 75: C H A P T E R 5 Testing The Cisco Unified Meetingplace Audio Server System Installation And Upgrade

    Chapter 5 Testing the Cisco Unified MeetingPlace Audio Server System Installation and Upgrade Unified MeetingPlace Audio Server at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_installation_and_configuration_gu ides_list.html. Testing Inbound Calls for T1 CAS, T1 PRI, and E1 Telephony by Using Circular Hunting To Test Inbound Calls for T1 CAS, T1 PRI, and E1 Telephony by Using Circular Hunting Access the CLI.

  • Page 76: Testing Inbound Calls For T1 Cas, T1 Pri, And E1 Telephony By Using A Dialing Sequence

    Testing Inbound Calls for T1 CAS, T1 PRI, and E1 Telephony by Using a Dialing Sequence When you hear the prompt “Welcome to MeetingPlace,” press 2. The Cisco Unified MeetingPlace Step 5 system replies with “Enter your profile number.” This verifies a full two-way connection between the PBX and central office.

  • Page 77: Testing Scheduling

    Chapter 5 Testing the Cisco Unified MeetingPlace Audio Server System Installation and Upgrade DebugMenu: 1) Quick Status of all Ports 2) Verbose Status of Port Range 3) Display complete Port Information Enter the Command You entered 4. Enter destination for your call: The preceding code examples are for a Cisco Unified MeetingPlace 8112.

  • Page 78: Testing Conferencing In Recorded Meetings

    Testing Conferencing in Recorded Meetings To Test Scheduling Step 1 Confirm that you can schedule a new meeting. Step 2 Confirm that you can attend the new meeting. Step 3 If the Cisco Unified MeetingPlace notification option is enabled, confirm that you can receive notifications when meetings are scheduled.

  • Page 79: Testing Network Latency

    Chapter 5 Testing the Cisco Unified MeetingPlace Audio Server System Installation and Upgrade Testing Network Latency To Test Network Latency Access the CLI and enter ping -s 1000 IP_address_of_another_machine_on_the_network. The Step 1 “-s 1000”argument simulates normal network activity by sending 1,000 bytes of dummy data to the other IP address.
  • Page 80 Chapter 5 Testing the Cisco Unified MeetingPlace Audio Server System Installation and Upgrade Testing Network Latency Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x OL-13417-01...

  • Page 81: Chapter 6 Maintaining The Cisco Unified Meetingplace Audio Server System

    Maintaining the Cisco Unified MeetingPlace Audio Server System This chapter describes how to maintain—not repair—the Cisco Unified MeetingPlace Audio Server system and contains the following sections: • Replacing the Filter in the Power Supply Unit Fan (Cisco Unified MeetingPlace 8112 Only), page 6-1 •...
  • Page 82 Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x Chapter 6 Maintaining the Cisco Unified MeetingPlace Audio Server System “Logging Your HyperTerminal Session” Motorola CPX8216T CompactPCI CPV5370 S/N=5129443 Pentium III, Model 8, 700 MHz 512 MB 3.32V, 5.02V, 12.06V OK, fan is OK OL-13417-01...

  • Page 83: Enabling Server Disk Capacity Monitoring

    Chapter 6 Maintaining the Cisco Unified MeetingPlace Audio Server System PS2: PS3: SCSI Adapter: DISK 1: DISK 2: Solid State Disk: Ethernet: Modem: Smart Blades: Slot 16: Slot 15: Enabling Server Disk Capacity Monitoring You can monitor the disk use of the Cisco Unified MeetingPlace Audio Server system. The Cisco Unified MeetingPlace system raises an alarm when it reaches or exceeds a specified use threshold.

  • Page 84: Enabling Server Disk Capacity Monitoring

    Enabling Server Disk Capacity Monitoring 3) 0 /tmp 4) 0 /lat/fs.1 5) 0 /lat/fs.2 6) 0 /lat/fs.3 Select an item to modify, s to save and exit, or q to quit without saving: 2 enter new value for /lat/db: 95 CAP% FILESYSTEM ==== ========== 1) 0...

  • Page 85: Chapter 7 Troubleshooting The Cisco Unified Meetingplace Audio Server System Installation

    Troubleshooting the Cisco Unified MeetingPlace Audio Server System Installation The chapter contains the following sections: Troubleshooting the Connection to the Audio Server System, page 7-1 • Troubleshooting Telephony Configuration, page 7-2 • Troubleshooting the Connection to the If you cannot connect to the Cisco Unified MeetingPlace Audio Server system by using MeetingTime, try any or all of the following tasks: Enter ping to ping a known good IP address to determine if the network can access the Cisco Unified •...

  • Page 86: Troubleshooting Telephony Configuration

    Troubleshooting Telephony Configuration Troubleshooting Telephony Configuration To Troubleshoot Telephony Configuration Check that the information you entered into MeetingTime from the worksheets in the Installation Step 1 Planning Guide for Cisco Unified MeetingPlace is correct. Check all the physical connections to the Cisco Unified MeetingPlace Audio Server system. Step 2 For the Cisco Unified MeetingPlace 8112, check that no LEDs are in a bad state.

  • Page 87: Appendix

    Cisco Unified MeetingPlace Audio Server Software Upgrade Reference This appendix contains sample sessions of upgrading the Cisco Unified MeetingPlace Audio Server software. (See the upgrade procedures.) Use the following sections as a reference when you are upgrading the software so that you will know how far in the process you are: •...

  • Page 88: Cisco Unified Meetingplace Audio Server Software Upgrade Reference

    Viewing the Remote Upgrade for a Sample Session Without a Disk Backup Archive created: Fri Aug 1813:51:39 PDT 2006 --------------------------------------------------------------- Press to continue or to abort. Mon Aug 21 14:20:41 PDT 2006 Starting ./UPDATE.phase1 Mon Aug 21 14:20:41 PDT 2006 Verifying the tape image checksum Mon Aug 21 14:20:49 PDT 2006 Killing cron Mon Aug...

  • Page 89: A P P E N D I X A Cisco Unified Meetingplace Audio Server Software Upgrade Reference

    Viewing the Upgrade Status for a Remote Upgrade Session Release 5.4, Aug user name: tech Password: Last login: Mon Aug ************************************************************************* Copyright (c) 1993-2006 Cisco Systems ************************************************************************* Conference server 5.4 S/N: not set Mon Aug 21 19:55:58 PDT 2006 :tech$ update status...
  • Page 90 Viewing the Real-Time Upgrade Status for a Remote Upgrade Session ----------- db preallocation complete Mon Aug ----------- Preallocating deletedrec Mon Aug Reserving 1000000 deletedrec records (code 10000) ... the deletedrec file already has 1000000 record(s) Pre-allocating each key file... Adding 2 16384 byte pages to key file deletedrec.Sequence... ----------- deletedrec preallocation complete Mon Aug ----------- Preallocating flexmenu Mon Aug Record 10000 (FMAppRec): has no preallocation count...
  • Page 91 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Adding 2 16384 byte pages to key file user.vuname... Adding 2 16384 byte pages to key file user.glfn... Adding 2 16384 byte pages to key file user.UpdateTime... ----------- gen preallocation complete Mon Aug Database Initialization Utility Centura RDM 5.0.0 [24-Apr-2000] http://www.centurasoft.com/rdm Copyright (c) 1992-2000 Centura Software Corporation.
  • Page 92 Viewing the Real-Time Upgrade Status for a Remote Upgrade Session Adding 3 16384 byte pages to key file crres.resourceid... Adding 3 16384 byte pages to key file portres.resourceid... Adding 343 16384 byte pages to key file vsres.resourceid... Adding 343 16384 byte pages to key file vsres.UpdateTime... ----------- res preallocation complete Mon Aug Database Initialization Utility Centura RDM 5.0.0 [24-Apr-2000] http://www.centurasoft.com/rdm...
  • Page 93 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Reserving 1000 trunk records (code 10005) ... the trunk file already has 10800 record(s) Reserving 100 trunkgroup records (code 10006) ... the trunkgroup file already has 1 16384 byte pages that can hold 110 record(s) Reserving 100 e1card records (code 10007) ...
  • Page 94 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Real-Time Upgrade Status for a Remote Upgrade Session 6000 8000 10000 12000 14000 16000 18000 20000 22000 24000 26000 28000 30000 32000 34000 36000 38000 40000 42000 44000 46000 48000 50000...
  • Page 95 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Real-Time Upgrade Status for a Remote Upgrade Session 134000 136000 138000 140000 142000 144000 146000 148000 150000 152000 154000 156000 158000 160000 162000 164000 166000 168000 170000 172000 174000 176000 178000...
  • Page 96 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Real-Time Upgrade Status for a Remote Upgrade Session 262000 264000 266000 268000 270000 272000 274000 276000 278000 280000 282000 284000 286000 288000 290000 292000 294000 296000 298000 300000 302000 304000 306000...
  • Page 97 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Real-Time Upgrade Status for a Remote Upgrade Session 390000 392000 394000 396000 398000 400000 402000 404000 406000 408000 410000 412000 414000 416000 418000 420000 422000 424000 426000 428000 430000 432000 434000...
  • Page 98 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Real-Time Upgrade Status for a Remote Upgrade Session 518000 520000 522000 524000 526000 528000 530000 532000 534000 536000 538000 540000 542000 544000 546000 548000 550000 552000 554000 556000 558000 560000 562000...
  • Page 99 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Real-Time Upgrade Status for a Remote Upgrade Session 646000 648000 650000 652000 654000 656000 658000 660000 662000 664000 666000 668000 670000 672000 674000 676000 678000 680000 682000 684000 686000 688000 690000...
  • Page 100 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Real-Time Upgrade Status for a Remote Upgrade Session 774000 776000 778000 780000 782000 784000 786000 788000 790000 792000 794000 796000 798000 800000 802000 804000 806000 808000 810000 812000 814000 816000 818000...
  • Page 101 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Real-Time Upgrade Status for a Remote Upgrade Session 902000 904000 906000 908000 910000 912000 914000 916000 918000 920000 922000 924000 926000 928000 930000 932000 934000 936000 938000 940000 942000 944000 946000...

  • Page 102: Viewing The Onsite Upgrade For A Sample Session Without A Disk Backup

    Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup Prompt Upgrade>> EOF (0) reached in /lat/fs.1/prompt_db_vfs_map_dir0 file (promptNum 1551): 0 ... Done with English (US) Starting Update Company Info Loading to Lang Index=0 The languages installed are: Language 1 FINISHED: Prompt Database Upgrade is complete! Statistics: 0 new entries and 319 replacements...
  • Page 103 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Mon Aug 21 18:50:22 PDT 2006 Starting ./UPDATE.phase1 Mon Aug 21 18:50:22 PDT 2006 Verifying the tape image checksum Mon Aug 21 18:50:30 PDT 2006 Killing cron Mon Aug 21 18:50:31 PDT 2006 Copying root file system from partition 1a to 2a Mon Aug 21 18:51:17 PDT 2006 Starting extraction of files from archive: Mon Aug...
  • Page 104 Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup LynxOS (x86) created Mon Aug 18 15:05:41 PDT 2006 MeetingPlace by Cisco Systems Mon Aug 21 19:01:07 PDT 2006 Startup flags = a (all sizes and block numbers in decimal)
  • Page 105 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Current slot 0 (0 seconds) Processing file /lat/db/hwconfig containing 0 records Current slot 0 (0 seconds) Processing file /lat/db/hwstats containing 0 records Current slot 0 (0 seconds) Processing file /lat/db/option containing 22 records Current slot 22 (0 seconds) Processing file /lat/db/outdialtrans containing 16 records Current slot 16 (0 seconds)
  • Page 106 Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup Current slot 0 (0 seconds) Processing file /lat/db/didcnfgconfig containing 16 records Current slot 16 (0 seconds) Processing file /lat/db/schedparamsconfig containing 1 records Current slot 1 (0 seconds) dbrev completed, successful restructure Database Restructure Utility Centura RDM 5.0.0 [24-Apr-2000] http://www.centurasoft.com/rdm Copyright (c) 1992-2000 Centura Software Corporation.
  • Page 107 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Copying 5.4.0/outdialtrans.recnum: 32768 32768 Copying 5.4.0/option.name: 2048 2048 Copying 5.4.0/timezone.id: 32768 32768 Copying 5.4.0/timezone.timezonekey: 32768 32768 Copying 5.4.0/unit.unitnum: 32768 32768 Copying 5.4.0/site.sitenum: 32768 32768 Copying 5.4.0/scsi.unitid: 32768 32768 Copying 5.4.0/mtgcategory.uniqueid: 32768 32768 Copying 5.4.0/mtgcategory.name: 32768 32768...
  • Page 108 Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup Processing file /lat/db/didres containing 0 records Current slot 0 (0 seconds) Processing file /lat/db/didconfigres containing 0 records Current slot 0 (0 seconds) Processing file /lat/db/schedparamsres containing 0 records Current slot 0 (0 seconds) Processing file /lat/db/crresfstaccess containing 13 records Current slot 13 (0 seconds)
  • Page 109 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference 32768 32768 Copying 5.4.0/vsres.UpdateTime: 32768 32768 cmdbrev: starting /lat/bin/initdb -y 5.4.0/res Database Initialization Utility Centura RDM 5.0.0 [24-Apr-2000] http://www.centurasoft.com/rdm Copyright (c) 1992-2000 Centura Software Corporation. 5.4.0/res initialized cmdbrev: /lat/bin/initdb done cmdbrev: starting /lat/bin/initdb -y 5.4.0/tcnfg Database Initialization Utility Centura RDM 5.0.0 [24-Apr-2000] http://www.centurasoft.com/rdm...
  • Page 110 Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup Processing file /lat/db/e1span containing 36 records Current slot 36 (0 seconds) Processing file /lat/db/accard containing 27 records Current slot 27 (0 seconds) Processing file /lat/db/acspan containing 432 records Current slot 432 (0 seconds) Processing file /lat/db/iprescard containing 108 records Current slot 108 (0 seconds)
  • Page 111 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference 32768 32768 Copying 5.4.0/portrescard.unitid: 32768 32768 Copying 5.4.0/t1card.unitid: 32768 32768 Copying 5.4.0/t1span.unitid: 32768 32768 Copying 5.4.0/trunk.unitid: 327680 327680 Copying 5.4.0/trunkgroup.id: 32768 32768 Copying 5.4.0/e1card.unitid: 32768 32768 Copying 5.4.0/e1span.unitid: 32768 32768 Copying 5.4.0/accard.unitid: 32768 32768 Copying 5.4.0/acspan.unitid:...
  • Page 112 Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup Fixing group records++++++++++++++++++++++++++++++++! update: upgradetcnfg done cmdbrev: 5.4/update done cmdbrev: starting dbprealloc -b /lat/db ----------- Preallocating conf_att Mon Aug Reserving 200000 confatt records (code 10000) ... the confatt file already has 7143 16384 byte pages that can hold 200004 record(s) Reserving 1000 rsconfpart records (code 10001) ...
  • Page 113 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Reserving 1 companyinfo records (code 10001) ... the companyinfo file already has 1 record(s) Reserving 1 filestats records (code 10002) ... Adding 1 16384 byte page(s) to get 1 record(s) ... Reserving 1 hwconfig records (code 10003) ...
  • Page 114 Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup Adding 3 16384 byte pages to key file timezone.timezonekey... Adding 3 16384 byte pages to key file unit.unitnum... Adding 3 16384 byte pages to key file site.sitenum... Adding 3 16384 byte pages to key file scsi.unitid... Adding 17 16384 byte pages to key file mtgcategory.uniqueid...
  • Page 115 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Record 10005 (FMOptionMenu): has no preallocation count Record 10006 (FMHangUp): has no preallocation count Record 10007 (FMFindMtg): has no preallocation count Record 10008 (FMReviewMtgMat): has no preallocation count Record 10009 (FMGetProfile): has no preallocation count Pre-allocating each key file...
  • Page 116 Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup Reserving 1 pomailbox records (code 10000) ... the pomailbox file already has 32 record(s) Reserving 20000 pomsgdata records (code 10001) ... Pre-allocating each key file... Adding 2 16384 byte pages to key file pomsgdata.compundkey... ----------- podata preallocation complete Mon Aug ----------- Preallocating res Mon Aug Reserving 1 crres records (code 10004) ...
  • Page 117 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Reserving 1 swstatus records (code 10003) ... the swstatus file already has 1 record(s) Reserving 1500 exlogformat records (code 10004) ... the exlogformat file already has 3374 record(s) Reserving 20 apps records (code 10005) ... the apps file already has 21 record(s) Reserving 10000 outdial records (code 10006) ...
  • Page 118 Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup Pre-allocating each key file... Adding 3 16384 byte pages to key file analogcard.unitid... Adding 3 16384 byte pages to key file masterswcard.unitid... Adding 3 16384 byte pages to key file portrescard.unitid... Adding 3 16384 byte pages to key file t1card.unitid...
  • Page 119 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup 56000 58000 60000 62000 64000 66000 68000 70000 72000 74000 76000 78000 80000 82000 84000 86000 88000 90000 92000 94000 96000...
  • Page 120 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup 184000 186000 188000 190000 192000 194000 196000 198000 200000 202000 204000 206000 208000 210000 212000 214000 216000 218000 220000 222000 224000...
  • Page 121 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup 312000 314000 316000 318000 320000 322000 324000 326000 328000 330000 332000 334000 336000 338000 340000 342000 344000 346000 348000 350000 352000...
  • Page 122 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup 440000 442000 444000 446000 448000 450000 452000 454000 456000 458000 460000 462000 464000 466000 468000 470000 472000 474000 476000 478000 480000...
  • Page 123 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup 568000 570000 572000 574000 576000 578000 580000 582000 584000 586000 588000 590000 592000 594000 596000 598000 600000 602000 604000 606000 608000...
  • Page 124 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup 696000 698000 700000 702000 704000 706000 708000 710000 712000 714000 716000 718000 720000 722000 724000 726000 728000 730000 732000 734000 736000...
  • Page 125 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup 824000 826000 828000 830000 832000 834000 836000 838000 840000 842000 844000 846000 848000 850000 852000 854000 856000 858000 860000 862000 864000...
  • Page 126 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup 952000 954000 956000 958000 960000 962000 964000 966000 968000 970000 972000 974000 976000 978000 980000 982000 984000 986000 988000 990000 992000...
  • Page 127 LynxOS 386/486/Pentium PC-AT Version 3.1.0 Copyright 1987-1998 Lynx Real-Time Systems Inc. All rights reserved. LynxOS (x86) created Fri Aug 18 15:05:41 PDT 2006 MeetingPlace by Cisco Systems Mon Aug 21 19:03:53 PDT 2006 Startup flags = a (all sizes and block numbers in decimal)
  • Page 128 Appendix A Cisco Unified MeetingPlace Audio Server Software Upgrade Reference Viewing the Onsite Upgrade for a Sample Session Without a Disk Backup Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x A-42 OL-13417-01...

  • Page 129: I N D E X

    activity command alarms, power supply unit fan Australia E1 digital trunk requirements LAN cable requirements 1-13 T1 digital trunk requirements breakout boxes mounting for T1PRI or E1 system using two at one time cables crossover for RJ-48 connectors, requirement custom, requirements for E1 and T1 PRI DB9 serial, requirement E1 or T1 PRI, connecting with one MP-MA-16-PRI...
  • Page 130 Index commands activity configdiskcap down hwconfig ping 5-7, 7-1 restart restart disable restart enable spanstat update update status update trace COM port, laptop parameters conferencing testing in nonrecorded meetings with ad hoc recording testing in recorded meetings configdiskcap command configuring HyperTerminal laptop connecting...
  • Page 131 Cisco Unified MeetingPlace 8106 Cisco Unified MeetingPlace 8112 European Union E1 digital trunk requirements modem requirements 1-12 power requirements FCC registration filter, replacing in power supply unit fan hardware requirements Hong Kong LAN cable requirements 1-13 modem requirements 1-11 power requirements T1 digital trunk requirements wiring requirements for customer-supplied RJ-48 connectors...
  • Page 132 Index Multi Access Blades configurations for E1 and T1 PRI systems, about connecting E1 or T1 PRI telephony cables with one MP-MA-16-PRI with one MP-MA-16-PRI and one MP-MA-4-PRI 2-25 with one MP-MA-4-PRI 2-23 with two MP-MA-16-PRIs with two MP-MA-4-PRIs net command network latency, testing onsite upgrade, viewing for sample session without disk backup (reference)
  • Page 133 safety warnings scheduling, testing setting up dial-up networking HyperTerminal Singapore, wiring requirements for customer-supplied RJ-45 connectors software, upgrading Audio Server spanstat command starting Audio Server system system powering up Audio Server troubleshooting connection to Audio Server T1 CAS mixed with IP configuration, about testing inbound calls by using circular hunting inbound calls by using dialing sequence...
  • Page 134 Index modem requirements 1-11 power requirements T1 digital trunk requirements wiring requirements for customer-supplied RJ-48 connectors UDP port requirements 1-12 update command update status command update trace command upgrade onsite, viewing for sample session without disk backup (reference) A-16 remote, viewing for a sample session without disk backup (reference) session, viewing real-time status for remote (reference)

This manual is also suitable for:

8Meetingplace

Table of Contents