AEG 10669GN-MN User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Cookers
  5. 10669GN-MN
  6. User manual
AEG 10669GN-MN User Manual

AEG 10669GN-MN User Manual

Hide thumbs

Quick Links

EN User manual
AEG 10669GN-MN
COOKER
loading

Related Manuals for AEG 10669GN-MN

Summary of Contents for AEG 10669GN-MN

  • Page 1 EN User manual AEG 10669GN-MN COOKER...

  • Page 2: Table Of Contents

    7. ENVIRONMENT CONCERNS .................25 FOR PERFECT RESULT Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simple- features you might not find on ordinary appliances. Please take a few minutes to read this manual, to get the very best from your AEG product.

  • Page 3: Safety Information

    ENGLISH 1. SAFETY INFORMATION You have purchased one of our left within easy reach of children products for which we thank you. We because they are a potential hazard are confident that this new appliance, source. All packaging materials used modern, functional and practical, made are environmentally-friendly and with top quality materials, will meet all...
  • Page 4 the oven glass door since they can to ensure that they not play with the scratch the surface, which may result appliance. in shattering of the glass. Never use sponges or abrasive children aged from 8 years and above products, and solvents to remove and persons with reduced physical, stains or adhesives on the painted or sensory or mental capabilities or lack...

  • Page 5: Product Description

    ENGLISH are in the off or closed position, off the electrical supply and do checking that the “0” of the knob not tamper with it. All repairs or adjustments must be carried out serigraphed on the front panel. with maximum care and the proper attention of an authorised person.
  • Page 6 Gas oven thermostat knob (B) By rotating the knob in an anticlockwise direction, the following functions appear: = Closed position from Min. to Max = Oven temperatures (260°C) Timer (E) To set cooking time, first wind the timer up by turning it completely once from left to right and then back to the number of minutes you want.

  • Page 7: Operation

    ENGLISH leaving the minute counter time showing on the display and the symbol lights counter function up. Time is given in seconds during To correct or cancel the time set on countdown. At the end of the set time the minute counter, press keys 2 and the buzzer goes off, the symbol 3 simultaneously and then release key...
  • Page 8 and fats are highly inflammable when Burners Ø pan cm overheated). Ultrarapid 22÷24 Rapid 20÷22 temperatures indicated on the Semi-rapid 16÷18 thermostat knob. Auxiliary 12÷14 strongly recommend not to cover the base of the oven or the grill with aluminium foil or other materials. in the grill pan.
  • Page 9 ENGLISH knob pressed for about 15 seconds. If, at the end of this time, the burner introducing the end in the seat and fails to light, release the knob and unscrew and remove the hand grip wait at least 1 minute before trying from the spit.
  • Page 10 Meat: because the cold air would stop the yeast from rising. needed is more than 40 minutes, turn the oven off 10 minutes before the end oven off and leave it in for about 10 of cooking time to exploit the residual minutes.
  • Page 11 ENGLISH Cooking/baking table Weight Temperature shelf from the bottom in minutes CAKES Angel Cake Fruit Cake 35-40 Almond Cake 40-45 Chocolate Cake 30-40 PASTRIES Biscuits in general Brioches 190-220 25-35 Puff pastry 10-15 Shortcrust pastry BAKED PASTA Lasagne 210-225 55-65 Cannelloni 210-225 55-65...
  • Page 12 Grilling table Weight shelf from the bottom 1st side 2nd side MEAT Chop 0.50 Beefsteaks 0.15 Half chicken (each half) FISH Trout 0.42 Sole 0.20 BREAD Toast CHICKEN 60-80 The values given in the tables (temperatures and cooking times) are approximate and may vary according to each person’s cooking habits.
  • Page 13 ENGLISH (fig.10) To reassemble the glass, proceed in the reverse order, being careful not to pinch your Oven door removal (for certain models) The oven door can be removed to give easier access to the oven when cleaning. Fig. 8 To remove, proceed as follows: nail (R) in the hole (F) of the hinge (fig.
  • Page 14 Oven seal The oven seal guarantees the correct functioning of the oven. We recommend you: products. If the oven door seal has become hard or is damaged, contact our Service Fig. 10 it has been repaired. Replacing the oven lamp (fig.11) Ensure the appliance is switched off Self-cleaning panels before replacing the lamp to avoid the...

  • Page 15: Troubleshooting

    ENGLISH Oven side-guide rails For an effective cleaning of the oven side-guide rails, these can be extracted unscrewing knurled nuts To fit the rails back in their place, first insert rear pins in holes and then secure them with the knurled nuts Fig.

  • Page 16: Installation

    5. INSTALLATION Technical information slitting the plastic film along the edges with a sharp knife or pin. Warning! ALWAYS USE SAFETY GLOVES WHILE HANDLING THE The packaging materials used (cardboard, COOKER bags, polystyrene foam, nails etc.) must not be left anywhere within easy reach of children and maintenance operations listed in this as they are a potential hazard source.
  • Page 17 ENGLISH Location and aeration positioned on the back of the hob and then to fix the backgaurd as indicated Gas cookers must always discharge the in figure 19. products of combustion and the moisture through hoods connected to flues or accessible once the appliance is directly to the outside (fig.
  • Page 18 using threaded fittings in accordance with the UNI-ISO 7/1 standard. The accordance with the standard, with an use of hemp with suitable adhesives 8 mm diameter, minimum 400 mm in or Teflon tape as a sealant is allowed. length, maximum 1500 mm in length, firmly secured to the hose fitting with a safety clamp as per the standard.
  • Page 19 ENGLISH Adjustments technician following any adjustment or regulation. (simmer) must be undertaken only with burners functioning on natural gas while in the case of burners functioning on L.P.G, the screw must be locked down fully (in clockwise direction). burners is unnecessary. Taps (fig.
  • Page 20 Conversions Our burners can be adapted to different Oven burner (fig. 23) types of gas by simply installing the injectors suitable for the gas you want to The burner is installed on the oven base use. To help the installer, the table in the and is covered by the bottom plate which “TECHNICAL INFORMATION”...
  • Page 21 ENGLISH Maintenance same procedure but in the reverse order. changing parts, disconnect the appliance from the gas and electricity power sources. Replacing the taps and thermostat Proceed in the following way when replacing a tap or the thermostat: (fig. 26).(four for ultrarapid burner and two for the other burners) Fig.
  • Page 22 amperage is adequate for the not be cut out by the switch. appliance maximum power (see Changing the flexible gas hose data label affixed on the back of the cooker). In order to guarantee that the gas hose is always in excellent condition we strongly earth connection in accordance with recommend changing it on the date you current standards and prescriptions of...

  • Page 23: Technical Information

    ENGLISH 6. TECHNICAL INFORMATION Burner disposition on the hob Heat Input Injectors Sleve Sabaf 1/100 N. DENOMINATION mbar “X”mm 1/100 mm Rapid GPL 30 3000 Complete Semi-rapide GPL 30 1800 Complete Auxiliary GPL 30 1000 Complete Ultrarapid central GPL 30 3800 Complete Oven...

  • Page 24: Environment Concerns

    7. ENVIRONMENT CONCERNS The appliance was designed and made in accordance with the European standards listed below: The user is responsible for => EN 30-1-1, EN 30-2-1 and EN 437 delivering the appliance to the plus subsequent amendments appropriate collection centre at the (gas) end of its useful life, Failure to do =>...
  • Page 25 EN 437 <= EN 60 335-2-6 EN 60 335-1 <= EC 95/2006 <= .(BT EC 2004/108 <= (EMC EC 2009/142 <= 21/12/88 EC 89/109 EC/2002/96...
  • Page 26 Sabaf 100 1 3000 GPL 30 1800 GPL 30 1000 GPL 30 3800 GPL 30 4800 GPL 30 3400 GPL 30 96-Z 1502 ÷ 1447 912 ÷ 857 E 14 - T 300 H05 RR-F 3 × 0.75...
  • Page 28 .(26...
  • Page 30 L.P.G 15 Nm 3 Nm 20 Nm 4 Nm...
  • Page 31 13 LPG 1500 1500...
  • Page 32 UNI-ISO 228-1 .(18...
  • Page 35 E 14...
  • Page 36 .(10 MIND YOUR FINGERS...
  • Page 37 0.50 0.15 0.42 0.20 60-80...
  • Page 38 35-40 40-45 30-40 25-35 190-220 10-15 55-65 210-225 55-65 210-225 25-30 20-25 20-25 60-80 40-50 60-80 40-50 45-60 45-60 50-60 40-50 45-60 15-25 200-220 15-20 190-220...
  • Page 39 .(7-5...
  • Page 41 Ø 22÷24 20÷22 16÷18 12÷14...
  • Page 43 24.00 0.01 0.00 0.99 0.01...
  • Page 47 3 ..........................5 ..........................7 ............................14 ............................15 ............................22 ..........................23 ..........................www.aeg.com www.aeg.com/productregistration www.aeg.com/shop...
  • Page 48 AEG 10669GN-MN...
  • Page 49 www.aeg.com/shop...