User Manual Installation Please read this manual thoroughly prior to equipment set-up, operation and maintenance. Important!!! Please Read Before Installation • If the unit has recently been transported on its side, please let the unit stand upright for a minimum of 24 hours before plugging it in. •...
User Manual Electrical • Please ensure that the required voltage is being supplied at all times. • The unit should be plugged into a grounded and properly-sized electrical outlet with appropriate over- current protection. Please refer to the electrical requirements on the unit’s nameplate. •...
User Manual Running a Manual Defrost Cycle Units are pre-programmed to run automatic defrost cycles at preset intervals. However, if you would like to run a manual defrost cycle at any time, please follow the steps below. Only models with digital controls can run a manual defrost cycle.
Next, call 1-800-678-5517. Be sure to have the model number, cabinet serial number, and service plate number available when contacting service technicians. This warranty does not apply to, and Avantco is not responsible for, any warranty claims made on products sold or used outside of the United States.