Makita DFJ207 Instruction Manual
Cordless fan jacket
Hide thumbs
Also See for DFJ207:
- Instruction manual (73 pages) ,
- Instruction manual (68 pages) ,
- Instruction manual (25 pages)
Related Manuals for Makita DFJ207
Summary of Contents for Makita DFJ207
- Page 1 INSTRUCTION MANUAL Cordless Fan Jacket DFJ206 DFJ207 DFJ304 DFJ305 DFJ405 DFJ407 Read before use.
-
Page 2: Specifications
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. SPECIFICATIONS Model: DFJ206 DFJ207 DFJ304 DFJ305 DFJ405 DFJ407 USB power supply port DC 5V, 2.1A, Type A... -
Page 3: Safety Warnings
Save all warnings and instruc- Symbols tions for future reference. The following show the symbols used for the equip- Never use the fan jacket when temperature ment. Be sure that you understand their meaning before reach more than 50°C (122°F). Also avoid use use. - Page 4 USB power supply port. Doing so may cause causing fires, personal injury and damage. It will short circuit, which can cause smoke or a fire. also void the Makita warranty for the Makita tool and 12. Do not connect the power source to the charger. USB port. The USB port is only intended for charging lower voltage devices.
-
Page 5: Parts Description
PARTS DESCRIPTION DFJ206, DFJ207, DFJ304, DFJ305 DFJ405, DFJ407 Battery holder (10.8 V / Battery holder (14.4 V Loop for name badge Loop for arm badge 10.8 V - 12 V max) /18 V) (optional accessory) (optional accessory) Sleeve holder Battery pocket Mesh pocket for ice pack... -
Page 6: Installation
Attaching the battery holder INSTALLATION You can hang the battery holder on your waist belt. Installing or removing the battery To prevent the battery holder from dropping acciden- tally, attach a strap using the strap hole and secure it. cartridge 18 V / 14.4 V 10.8 V CAUTION:... - Page 7 Pass the strip through the loop on the fan unit and Installing or removing the fan unit fasten the snap button. Turn the ring counterclockwise while lifting the hook on it. Remove the ring when the mark on the ring aligns with the slot on the fan unit.
-
Page 8: Functional Description
Attaching the filter set FUNCTIONAL DESCRIPTION Optional accessory The filter set protects the fan unit from dust and powder. We recommend that you use the filter set in a dusty or NOTICE: The fan jacket is effective when the powdery work place. humidity and temperature of intake air are lower Insert the filter attachment between the jacket and fan than those of the body surface. The fan jacket unit as shown in the figure. may not be effective if the air temperature and/or humidity are higher than those inside the jacket. -
Page 9: Battery Protection System
Air flow Indicator lamps Remaining capacity To maintain a stable air flow, close the button at the Lighted Blinking neck of the jacket. Fasten the button on the ribbon for better air flow in the back. 75% to 100% 50% to 75% 25% to 50% 0% to 25% Charge the battery. (For 14.4 V and 18 V batteries only) The battery may have malfunctioned. (For 14.4 V and 18 V batteries only) NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. -
Page 10: Maintenance
Battery pocket A pocket is provided for storing the 10.8 V / 10.8 V - 12 V max battery holder (with battery) inside the jacket. Connect the power cable to the battery holder, and then put it into the pocket and fasten the snap buttons. ► 1 . Cover 2. Switch The battery holder (with the battery) supplies DC5V, 2.1A. The USB cable can be placed inside the jacket for convenience using the hole in the pocket and the cable holder. -
Page 11: Optional Accessories
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885577-220 www.makita.com 20170117...