Table of Contents
Quick Links
Table of Contents
Related Manuals for Zanussi ZOFR5003
Summary of Contents for Zanussi ZOFR5003
- Page 1 Oil Filled Radiator Model Number: ZOFR5003 2000W 220-240V AC 50Hz/60Hz This product is only suitable for well insulated spaces or occasional use 0330 1230 597 For Customer Services & Spare Parts please call Or visit us at www.zanussiheatingandcooling.uk PLEASE RETAIN...
-
Page 2: Table Of Contents
CONTENTS Page(s) Unpacking your appliance Safety Instructions Feature Diagram Base Assembly Using your Oil Filled Radiator 9 – 13 Cleaning and Care Problem Solving Guarantee and Customer Services Spare Parts Connection to the Mains Supply Specification Disposable Information Page 2... -
Page 3: Unpacking Your Appliance
UNPACKING YOUR APPLIANCE Before you use your appliance 1. Remove all the packaging. 2. Check the appliance after unpacking for any visual damage such as: • Misaligned or damaged parts • Damage to the controls • Damage to the plug or cable •... - Page 4 SAFETY INSTRUCTIONS • Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. The supply cord can not be replaced. If the cord is damaged the appliance should be scrapped. •...
- Page 5 SAFETY INSTRUCTIONS • Do not insert any foreign objects into the ventilation. • Keep all ventilation clear of any draped fabric or curtains. • The appliance must not be located immediately below a mains socket. Do not use the appliance with a programmer, timer or any other device that switches the appliance on automatically.
- Page 6 SAFETY INSTRUCTIONS • Warning: Children of less than 3 years should be kept away unless continuously supervised. • Warning: Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards...
-
Page 7: Feature Diagram
FEATURE DIAGRAM 1. Handle 5. LED display 2. Fins 6. Controls 3. Power switch 7. Power cable storage 4. Castors/Wheels 8. Remote control For Customer Services & Spare Parts please call 0330 1230 597 Or visit us at www.zanussiheatingandcooling.uk Page 7... -
Page 8: Base Assembly
BASE ASSEMBLY 1. Attach the castors to the base plate and secure using the 4 x nuts supplied. 2. Then turn the heater upside down and position between the end fins. 3. Attach the base plates by hooking the 2 x U-bolts through the fins and securing with the 4 x wing nuts. -
Page 9: Using Your Oil Filled Radiator
USING YOUR OIL FILLED RADIATOR Display & controls 1. Temperature & timer display 6. Timer button 2. Low heat setting symbol & 7. ⁰C symbol & indicator indicator 8. Timer symbol & indicator 3. Medium heat setting symbol & 9. Power symbol & indicator indicator 10. - Page 10 USING YOUR OIL FILLED RADIATOR Remote control 1. Power button 2. Mode button (Heating setting) 3. Up temperature control button 4. Timer button 5. Down temperature control button Page 10...
- Page 11 5. Press the mode button on the unit or the remote control and select the heat setting you require. The appliance has 3 power settings and the indicator light on the display will light up for each setting. Power Control Position ZOFR5003 Low heat ON 800W Medium heat ON 1.2kW High heat ON 2.0kW...
- Page 12 USING YOUR OIL FILLED RADIATOR 8. If the room temperature falls below the desired temperature, the heating elements will turn on again until the room temperature reaches the desired temperature. Note: this radiator is oil filled, and will cool down slowly after the power is shut off.
- Page 13 USING YOUR OIL FILLED RADIATOR Safety Protective Devices - The appliance is fitted with an over heat and tip over protection system. 1. Overheat protection - the power to the heating elements will automatically cut off if the temperature of the heating elements exceeds a certain limit.
-
Page 14: Cleaning And Care
CLEANING AND CARE WARNING: Electrical Shock Hazard. Before you clean the appliance, disconnect the mains plug from the wall socket. • Allow the appliance to cool down completely before cleaning. • Do not immerse cord, plug or appliance in any liquid or allow moisture to come into contact with electrical parts. -
Page 15: Problem Solving
PROBLEM SOLVING My appliance does not work when I turn it on: 1. Check that your appliance is plugged in, the power is turned on at the mains socket and the power switch on the side of the unit is powered unit. 2. -
Page 16: Guarantee And Customer Services
GUARANTEE AND CUSTOMER SERVICES At Zanussi, we take all our customer feedback seriously. Feel free to contact our Customer Service Team, on 0330 1230 597, who will be more than happy to assist you. This product is guaranteed for 12 months from the date of the original purchase. -
Page 17: Spare Parts
SPARE PARTS To check the availability of the following spare parts, simply contact our friendly Customer Services team using the details provided at the bottom of this page. Castors U-bolts Base Plate Remote control For Customer Services & Spare Parts please call 0330 1230 597 Or visit us at www.zanussiheatingandcooling.uk Page 17... -
Page 18: Connection To The Mains Supply
CONNECTION TO THE MAINS SUPPLY This appliance is designed to operate from a mains supply of 220-240V~50Hz/60Hz. Check that the voltage marked on the product corresponds with your supply voltage. How to change the fuse 1. Slot the end of a screwdriver into the recess in the fuse holder of the plug. -
Page 19: Specification
SPECIFICATION Model number ZOFR5003 Rated voltage 220V - 240V ~ 50Hz/ 60Hz Power consumption 2000W Product dimensions (CMS) (H)59.5 x (W)24 x (D)40.5 Model number ZOFR5003 Item Symbol Value Unit Item Unit Heat output Type of heat input, for electric storage local space heaters only... -
Page 20: Disposable Information
Or visit us at www.zanussiheatingandcooling.uk Revision 1 Model: ZOFR5003 ZANUSSI is a registered trademark used under license from AB Electrolux (publ). Made under license by G2S Limited, Wigan, WN2 4AY. This symbol is known as the 'Crossed-out wheelie bin Symbol'.