Acer PD100 Service Manual
  1. Manuals
  2. Brands
  3. Acer Manuals
  4. Projector
  5. PD100
  6. Service manual

Acer PD100 Service Manual

Hide thumbs Also See for PD100:
Table of Contents

Quick Links

See also: User Manual
PD100 / PD120
Service Guide
Service guide files and updates are available
on the AIPG/CSD web; for more information,
please refer to
http://csd.acer.com.tw
PRINTED IN TAIWAN
Table of Contents
loading

Related Manuals for Acer PD100

Summary of Contents for Acer PD100

  • Page 1 PD100 / PD120 Service Guide Service guide files and updates are available on the AIPG/CSD web; for more information, please refer to http://csd.acer.com.tw PRINTED IN TAIWAN...

  • Page 2: Revision History

    Revision History Please refer to the table below for the updates made on PD100 / PD120 service guide. Date Chapter Updates...
  • Page 3 Copyright Copyright © 2005 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Acer Incorporated.
  • Page 4 Conventions The following conventions are used in this manual: Screen messages NOTE WARNING CAUTION IMPORTANT Denotes actual messages that appear on screen. Gives bits and pieces of additional information related to the current topic. Alerts you to any damage that might result from doing or not doing specific actions.
  • Page 5 DIFFERENT part number code to those given in the FRU list of this printed Service Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and service of customer machines.

  • Page 6: Table Of Contents

    Equipment Needed LED Lighting Message Main Procedure Function Test and Alignment Procedure Product / Test Equipment / Test Condition Inspection Procecdure Guide to Entering Service Mode and Factory Reset (PD100) Chapter 5 Exploded Overview Exploded Overview Appendix Serial Number Definition System I.

  • Page 7: System Introduction

    System Introduction Technical Specification Item Dimensions (WxHxD) 230 x 122.8 x 238 mm Weight Approx. 4.85 lbs (2.2 Kg) Tilt Angle 7 degree with elevator mechanism Keystone correction +/-16 degree (32 degree) (Horizontal) Lamp Door Projection Lamp power supply shut off automatically when door open Universal AC 100-240V ~ 50-60Hz with PFC input 200W for Philips UHP Lamp @ normal operation Power Supply...

  • Page 8: Product Overview

    Product Overview Main Unit Item Focus Ring Zoom Ring Zoom Lens Elevator Button Elevator Foot Remote Control Receiver Connection Ports Power Socket Control Panel Chapter 1 Description...

  • Page 9: Control Panel

    Control Panel Item Lamp Indicator LED Temp Indicator LED Power / Standby and Indicator LED (Power LED) Source Resync Four Directional Select Keys Menu Description Chapter 1...

  • Page 10: Connection Ports

    Audio Input Connector S-Video Input Connector Monitor Loop-through Output Connector USB Connector Remote Control IR Receiver Composite Video Input Connector Kensington 5V DC Output Jack (dfor attached dongle device) (for PD100 only) (for PD120 only) Chapter 1 Description Lock Port...

  • Page 11: Connecting The Projector

    VGA Cable Composite Video Cable USB Cable VGA to Component / HDTV Adapter S-Video Cable Audio Cable Jack / Jack DVI Cable (Optional Accessory) 5V DC Output Jack for attached Dongle Device (for PD100 only) (for PD120 only) Description Chapter 1...

  • Page 12: System Block Diagram

    +3.3V/1.3A (1.5A Max) +5.0V/3.2A (3.5A Max) LVPS +13.0V/0.4A (1.0A Max) +385V/0.62A (0.65A Max) TMDS IN DVI RS-232 DDC I2C DVI EDID RGB Out EDID R/W I2C HV Out VGA EDID DDC I2C VGA RS-232 VGA RGB VGA RGB VGA HV DVD YPbPr VGA HVSync WS HVSync...

  • Page 13: Chapter 2 Firware Upgrade

    Firmware Upgrade Equipment Needed Software : (DDP 2000- USB) - DLP Composer - Firmware (PD100 / PD120) Hardware : Item Photo Projector (PD100) Power Cord USB Cable Item Photo Projector (PD120) PC or Laptop Chapter 2 Chapter 2...

  • Page 14: Installation Procedure

    Installation Procedure DLP Composer Lite Setup Procedure Step Procedure 1 Execute FW Choose "DLP Composer program Lite v3.6 Setup" program. Next Click "Next" button. Next 1. Reading the "License Agreement" rules. 2. Choose "I accept and agree to be bound by all the terms and conditions of this License Agreement"...
  • Page 15 Step Procedure Next 1. Choose "All" icon 2. Click "Next" button. Next Click "Next" button. Processing The program is executing "Initializing" status. Photo Chapter 2...

  • Page 16: Usb Driver Upgrade Procedure

    USB Driver Upgrade Procedure Step Procedure 1 Set-up 1. Plug in USB Cable into the Projector. 2. Hold on "Menu" button and then plug in Power Cord. 3. Wait for about 5 seconds. (Note: The system fan will not function. The light will not function as well.) Execute Execute the C:\Program...
  • Page 17 Step Procedure Update Click "OK". The USB driver Successfully is updated successfully. Device 1. Right click "My computer" Manager on the desktop. 2. Select "Properties" on the popup menu to launch the "System Properties" window. 3. Choose "Hardware" and then click "Device Manager".

  • Page 18: Firmware Upgrade Procedure

    Firmware Upgrade Procedure Step Procedure 1 Set-up Link PC COM1 and projector Execute the "DLP TM" Compose Click "Edit" and "Preferences". 1. Click "Library". 2. The library path located in the default installation directory is: C:\Program Files\DLP Composer. If not, press "Browse" to select the right path.
  • Page 19 Step Procedure 1. Choose "Flash Loader" 2. Click "Browse" to search the firmware file. (PD100 / PD120) 3. Select the item "Skip Boot Loader Area (load all but the first 16KB)." 4. Click "Reset Bus" to erase the flash memory.
  • Page 20 Step Procedure Proceeding Proceeding Picture 1. When Firmware Upgrade Process is finished, the LED power 2. Unplug USB Cable and Power Cord. Re-plug in Power Cable after 3 mins. 10 Check Restart the unit and enter Firmware the Service Mode to check the Firmware Version.

  • Page 21: Edid Upgrade

    Hardware: - V3 Fixture for EDID Key-in (Fixture: JP3 must be closed) Item RS-232 Cable (F - M) DVI Cable VGA Cable Projector (PD100) Photo Item Power Adapter for Fixture Generic Fixture Power Cord One additional monitor (for checking the...

  • Page 22: Setup Procedure

    Setup Procedure Step 1 Connect All Ports 1. Power Adapter to Fixture JP1 2. Fixture P1 to PC COM1 Port 3. Fixture P2 to Projector Analog Port 4. Fixture P3 to Projector Digital Port 2. Power On Fixture Power on Fixture EDID Key-In Procedure Step Procedure...
  • Page 23 Step Procedure Key in Serial 1. Key in the Serial Number Number into the Barcode blank space. 2. In "White Source Select", make a check in "VGA" and "DVI". 3. Check the COM Port is "COM 1". 4. Click "Program". Change Cable "Please change the Cable to Analog...
  • Page 24 Step Procedure Check the 1. In the "Read Item" whole process Selections, choose the Port that you use. Ex: If you use the Analog Port, choose "Analog" in the "Read Item". Note: If the code in the Serial Blank is scrambled, please make a check in "Trans".

  • Page 25: Chapter 3 Mechanical Disassembly And Reassembly

    Mechanical Disassembly & Reassembly This section provides disassembly & Reassembly procedures for PD100 Micro Portable SVGA DMD Projector. Before you begin any of these procedures, be sure to turn off the power, computer system, and other attached devices; then disconnect the power cable from the electrical outlet.

  • Page 26: Mechanical Disassembly Procedure

    Mechanical Disassembly Procedure 1. Remove Lamp Module Procedure Unscrew 2 screws to remove the Lamp Cover. Unscrew 2 screws to remove the Lamp Module. Chapter 3 Photo...
  • Page 27 2. Remove IO Cover / Top Cover Procedure Unscrew 2 screws & 6 hex screws to remove the IO Cover. 1. Lift up the Top Cover first and then pull the Bottom Cover for easily separting the Top Cover. 2. Remove 1 FPC Cable to remove the Top Cover.
  • Page 28 3. Remove Keypad Board Procedure 1. Unscrew 4 screws to remove the Keypad Board. 2. Separate the Keypad Module. Unscrew 2 screws to remove the Top Cover Shielding. Chapter 3 Photo...

  • Page 29: Push Button

    4. Remove Front Cover / IR Sensor Board / Elevator Push Button Procedure 1. Unscrew 1 screw to remove the IR Receiver. 2. Unscrew 2 screws to remove the Front Cover. Unplug 1 connector (red color) to remove the Front Cover Module.
  • Page 30 5. Remove Bottom Cover Module Procedure Remove Bottom Cover Sponge. Remove Side Covers. (Right Cover & Left Cover) Note 1: When disassembing the Side Cover, push the side cover outside forwards and then pull it up directly. Note 2: When reassembing the Side Cover, please locate &...

  • Page 31: Remove Main Board

    6. Remove Main Board Procedure Unplug 8 connectors first and then unscrew 4 screws. Note: When Reassembling the Main Board with the Top Cover, please be aware of the wire arrangement. The wire arrangement should go as the picture shows (not exceeding 1/2 of the red blank space) to best allocate the Top Cover Sponge.
  • Page 32 7. Remove EMI Shielding / Speaker Procedure Unscrew 4 screws to remove the EMI Shielding Cover of units. Unscrew 2 screws to remove the Speaker. Note: The Speaker isn’t designed with error-proof. Please be aware of wire-arrangement as the picture shows. Chapter 3 Photo...
  • Page 33 8. Remove Axial Fan Module Procedure Unscrew 3 screws to remove Axial Fan Module. Unscrew 4 screws to remove the System Fan. Note: The System Fan isn’t designed with error-proof. Please be aware of the wire- arrangement. Photo Chapter 3...

  • Page 34: Remove Lamp Driver

    9. Remove Lamp Driver Procedure Unscrew 4 screws. Unplug 2 connectors to remove the Lamp Driver Module. Note: When assembling the LVPS, please be aware of the LVPS connector connection. (the shorter wire should be connected to the LVPS, and the longer wire should be connected to the Lamp Driver.) Unscrew 4 screws to separate...
  • Page 35 10. Remove LVPS / Interlock Swtich / Thermal Switch Procedure 1. Unscrew 4 screws 2. Unscrew 1 screw in the grounding wire. 3. Unplug 1 connector in the Interlock Swtich to remove the LVPS. 1. Unscrew 2 screws to remove the Interlock Switch. 2.

  • Page 36: Remove Engine Module

    11. Remove Engine Module Procedure Unscrew 3 screws to remove the Engine Module. 1. Unscrew 1 screw to remove the Light Cut. 2. Unscrew 1 screw to remove the Thermal Sensor. Unscrew 1 screw to remove Photo Sensor Board. 1. Unscrew 4 screws and tear off 1 EMI tape to remove the Heatsink.
  • Page 37 Procedure When reassembling the DMD Module, please be aware of the following Notes. Note1: The DMD Heasink Spring Plate should be placed as the picture shows. Note 2: The DMD Insulator Mylar & DMD Heatsink Backer Plate should be placed as the picture shows.
  • Page 38 12. Remove Elevator / Blower Fan Procedure Unscrew 4 screws to remove the Elevator. Unscrew 3 screws to remove the Blower Fan. Chapter 3 Photo...

  • Page 39: Mechanical Reassembly Procedure

    Mechanical Reassembly Procedure 1. Assemble Elevator / Blower Fan Procedure Screw 4 screws to assemble the Elevator. Screw 3 screws to assemble the Blower Fan. Photo Chapter 3...

  • Page 40: Assemble Engine Module

    2. Assemble Engine Module Procedure 1. Screw 2 screws to assemble the Zoom Ring & Stopper. 2. Screw 3 screws to assemble the Focus Ring. Screw 1 screw to assemble the Color Wheel. When reassembling the DMD Module, please be aware of the following Notes.
  • Page 41 Procedure 1. Assemble the DMD Board Components. 2. Screw 4 big hex screws to assemble the DMD Board. 3. Screw 4 screws and put on 1 EMI tape to assemble the Heatsink. Screw 1 screw to assemble the Photo Sensor Board. 1.
  • Page 42 3. Assemble Interlock Swtich / Thermal Switch / LVPS Procedure 1. Screw 2 screws to assemble the Interlock Switch. 2. Screw 1 screw to assemble the Assy Thermal Switch Board. 1. Screw 4 screws 2. Screw 1 screw in the grounding wire.
  • Page 43 4. Assemble Lamp Driver Procedure Screw 4 screws to assemble the Lamp Driver Housing. Plug in 2 connectors. Note: Please be aware of the wire arrangement of the LVPS with the Lamp Driver. (The shorter wire should be connected to the LVPS;...
  • Page 44 5. Assemble Axial Fan Module Procedure Screw 4 screws to assemble the System Fan. Screw 3 screws to assemble Axial Fan Module. Note: Please be aware of the wire arrangement of the system fan. (the wire should be in the upper left side.) Chapter 3 Photo...
  • Page 45 6. Assemble Speaker / EMI Shielding Procedure Screw 2 screws to assemble the Speaker. Note: Please be aware of the wire arrangement of the speaker. Screw 4 screws to assemble the EMI Shielding Cover of Units. Photo Chapter 3...
  • Page 46 7. Assemble Main Board Procedure 1. Plug 1 connector. 2. Locate the front part of Main Board. Screw 4 screws and plug in 8 connectors to assemble the Main Board. Note: When Reassembling the Main Board with the Top Cover, please be aware of the wire arrangement.

  • Page 47: Assemble Bottom Cover Module

    8. Assemble Bottom Cover Module Procedure Assemble the shieldings with the Main Unit based on the 2 tenons. Assemble Side Covers. (Right Cover & Left Cover) Note: When reassembing the Side Cover, please locate & align the tenons as the picture shows.
  • Page 48 9. Assemble Front Cover / IR Sensor Board / Elevator Push Button Procedure Assemble the Elevator Push Button directly. Assemble the IR Receiver Board and put on the Front IR Cover directly. Plug in 1 connector (red color) to assemble the Front Cover Module.
  • Page 49 10. Assemble Keypad Board Procedure Screw 2 screws to assemble the Top Cover Shielding. 1. Assemble the Keypad Module. 2. Screw 4 screws to assemble the Keypad Board. Photo Chapter 3...
  • Page 50 11. Assemble Top Cover / IO Cover Procedure 1. Put on 1 FPC Cable to assemble the Top Cover. 2. Push the Bottom Cover first; then, push down the Top Cover to assemble the Top Cover. Screw 2 screws & 6 hex screws to assemble the IO Cover.
  • Page 51 12. Assemble Lamp Module Procedure Screw 2 screws to assemble the Lamp Module. Screw 2 screws to assemble the Lamp Cover. Photo Chapter 3...

  • Page 52: Chapter 4 Troubleshooting

    Troubleshooting Equipment Needed - PC or Pattern Generator - DVD Player (Video, S-Video, Audio) - Quantum Data 802B or CHROMA 2327 LED Lighting Message Message Standby State (Input power cord) Lamp lighting Power on Power off (Cooling) Error (Lamp fail) Error (Thermal fail) Error (Fan lock fail) Error (Over Temp.)

  • Page 53: Main Procedure

    Main Procedure Symptom No Power Auto Shut Down No Image No Light On Mechanical Noise Line Bar / Line Defect Image Flicker Color Abnormal Procedure - Ensure the Power Cord and AC Power Outlet are securely connected - Check Lamp Cover and Interrupt Switch - Ensure all connectors are securely connected and aren't broken - Check DC-DC - Check Ballast...
  • Page 54 Symptom Poor Uniformity / Shadow Dead Pixel / Dust (Out of spec.) Garbage Image Remote Controll or Control Panel Failed Function Abnormal Chapter 4 Procedure - Ensure the Projection Screen without dirt - Ensure the Projection Lens is clean - Ensure the Brightness is within spec. (Replace the Lamp if the Brightness is less than spec.) - Check Engine Module - Ensure the Projection Screen without dirt...

  • Page 55: Function Test And Alignment Procedure

    - Circumstance Brightness : Dark room less than 2.5 lux. - Inspection Distance : 1.5m~3m for functional inspection - Screen Size : 60 inches diagonal (wide) - After repairing each PD100, the unit should be burn-in (Refer to the table below). Symptom Normal Repair...

  • Page 56: Inspection Procedure

    - Test Pattern : Full Screen - Adjust the center clearly; meanwhile, one slightly vague corner in the image is allowed. - Test Signal : 480P, 1080i (PD100) - Test Pattern : Master - Equipment: Quantum Data 802B or CHROMA2327 *Please refer to page 4~7 to enter Service Mode.
  • Page 57 Procedure - Test Signal : 800x600@75Hz (PD100) - Test Pattern : 32 Grays, Gray 10_HP, Gray 30_HP (From Top to Bottom) - Please check and see if the light leaks. Follow up TI DMD Chip Spec.
  • Page 58 Step Specification 11 Dead Pixel Cannot accept (Bright pixel) any bright pixel Dead Pixel The numbers of (Dark pixel) dead pixel should be smaller or amount to 6 pixel. 12 Blemish The bright (Bright) blemish cannot be accepted if the problem appear with Gary 30 pattern 13 Blemish...

  • Page 59: Guide To Entering Service Mode And Factory Reset (Pd100)

    1. Please enter the servcie mode, 2. Choose "Factory Reset" then choose "Yes" and press "Enter" to see if it works. Service Mode. (As the following pictures show) “Left” button Power (PD100) Steps Menu “Left” button Chapter 4...

  • Page 60: Exploded Overview

    ASSY TOP COVER MODULE PD100 70.82V15G001 ASSY BOTTOM HOUSING MODULE PD100 70.82G09G001 ASSY LAMP MODULE EP7190 70.82V23G001 ASSY BACK COVER DC MODULE PD100 70.82V33G001 ASSY LAMP COVER MODULE PD100 85.1A323.100 SCREW PAN MECH M3*10 BLACK 85.005AGG040 SCREW I/O STEEL #4-40UNC*H4*L5.5 NYLOK 85.5A323.060...
  • Page 61 PD120 Exploded Overview Exploded Parts List Item Part Number 70.82V03G001 70.82V07G001 70.82V01G001 70.82G09G001 70.82V14G001 70.82V32G001 85.1A323.100 85.005AGG040 85.5A323.060 61.00079G001 61.00018G002 Note: Please refer to RSPL for updated Part Number. ASSY FRONT COVER MODULE PD120 ASSY TOP COVER MODULE PD120 ASSY BOTTOM HOUSING MODULE PD120 ASSY LAMP MODULE EP7190 ASSY BACK COVER DC MODULE PD120 ASSY LAMP COVER MODULE PD120...
  • Page 62 PD100 Assy Bottom Housing Module Exploded Parts List Item Part Number 70.82V09G001 70.82V17G001 61.82G12G001 70.82V10G001 70.82V04G001 80.82V51G001 51.82V19G001 70.82V25G001 52.82V04G001 51.82G16G001 42.87120G001 85.1A123.050 85.1A626G050 70.82G19G001 41.82G03G001 Note: Please refer to RSPL for updated Part Number. Chapter 5 ASSY BOTTOM BASE MODULE PD120 ASSY ENGINE MODULE PD100 LAMP LIGHTCUT TOP FOR E19 AL 0.6t EP7190...
  • Page 63 PD120 Assy Bottom Housing Module Exploded Parts List Item Part Number 70.82V09G001 70.82V11G001 61.82G12G001 70.82V10G001 70.82V04G001 80.82V01G001 51.82V19G001 70.82V02G001 52.82V04G001 51.82G16G001 42.87120G001 85.1A123.050 85.1A626G050 70.82G19G001 41.82G03G001 Note: Please refer to RSPL for updated Part Number. ASSY BOTTOM BASE MODULE PD120 ASSY ENGINE MODULE PD120 LAMP LIGHTCUT TOP FOR E19 AL 0.6t EP7190 ASSY AXIAL FAN MODULE PD120...
  • Page 64 PD100 Assy Bottom Cover Module Exploded Parts List Item Part Number 51.82V02G002 51.82V17G001 51.82V18G001 52.89601.001 86.03123.035 52.82V10G001 Note: Please refer to RSPL for updated Part Number. Chapter 5 BOTTOM COVER PC+ABS PD100 LEFT COVER PC+ABS PD120 RIGHT COVER PC+ABS PD120 ADJUST FOOT RUBBER EP759 HEX CAP HEAD NUT M3*0.5P L3.5 NI...
  • Page 65 PD120 Assy Bottom Cover Module Exploded Parts List Item Part Number 51.82V02G001 51.82V17G001 51.82V18G001 52.89601.001 86.03123.035 52.82V10G001 Note: Please refer to RSPL for updated Part Number. BOTTOM COVER PC+ABS PD120 LEFT COVER PC+ABS PD120 RIGHT COVER PC+ABS PD120 ADJUST FOOT RUBBER EP759 HEX CAP HEAD NUT M3*0.5P L3.5 NI BOTTOM COVER SPONGE-2 PD120 Description...
  • Page 66 PD120 Assy Bottom Base Module Exploded Parts List Item Part Number 49.88604.002 85.1A123.050 52.82G11G001 61.82V01G001 Note: Please refer to RSPL for updated Part Number. Chapter 5 SPEAKER 8ohm 2W X16 EP759 SCREW PAN MECH M3*5 Ni SPEAKER SPONGE EP7190 EMI SHIELDING AL PD120 Description...
  • Page 67 PD100 Assy Top Cover Module Exploded Parts List Item Part Number 51.82V03G001 61.82V04G001 51.82Q03G001 51.82Q05G001 51.82Q06G001 80.82Q03G001 61.82V03G001 85.WA123.040 42.82V02G001 51.82Q04G011 41.82V05G001 41.82V04G001 41.81M02G001 Note: Please refer to RSPL for updated Part Number. TOP COVER PC+ABS PD120 TOP COVER SHIELDING SPTE PD120...
  • Page 68 PD120 Assy Top Cover Module Exploded Parts List Item Part Number 51.82V03G001 61.82V04G001 51.82Q03G001-B 51.82Q05G001 51.82Q06G001-B 80.82Q03G001 61.82V03G001 85.WA123.040 42.82V02G001 51.82Q04G011 41.82V05G001 41.82V04G001 41.81M02G001 Note: Please refer to RSPL for updated Part Number. Chapter 5 TOP COVER PC+ABS PD120 TOP COVER SHIELDING SPTE PD120 KEYPAD MAIN BUTTON PC+ABS PD322 LED HOUSING PC PD322 POWER LED HOUSING PC PD322...
  • Page 69 PD120 Assy Bottom Base Module Exploded Parts List Item Part Number 61.82G01G001 51.85816.001 51.85824.001 75.88514.002 85.1A62G.050 70.82V34G001 61.00029.001 61.87340G001 85.3A122.040 41.82V01G001 76.82G01G001 61.85913.001 80.82V04G001 51.82G24G001 70.82V26G001 85.1C224G050 85.1A123.050 70.82V31G001 52.88504G001 Note: Please refer to RSPL for updated Part Number. BASE PLATE Mg ALLOY AZ91D EP7190 LIMIT SWITCH HOLDER PPS XB31 LIMIT SWITCH BOTTOM HOLDER PPS XB31 ASSY LIMIT SWITCH CHERRY DB3C A1LB-5A...
  • Page 70 PD120 Assy Axial Fan Module Exploded Parts List Item Part Number 49.80N01G001 61.82V02G001 85.1F123.260 52.82V07G001 51.00075.001 Note: Please refer to RSPL for updated Part Number. Chapter 5 SUNON 70*20 R-TYPE AXIAL FAN, GM1207PKVX-A 70*70*20mm, JST CONNECTOR,GREEN SUMITUDE FAN-LAMP BRACKET AL PD120 SCREW PAN MECH E/SF M3*26 Ni LAMP BRACKET SPONGE PD120 WIRE MOUNTS PG-FW-4D XB31...
  • Page 71 Exploded Parts List Item Part Number 70.82V27G001 70.82V18G001 85.1A123.050 41.82V02G001 Note: Please refer to RSPL for updated Part Number. ASSY ENGINE BOTTOM COVER MODULE PD120 ASSY ENGINE TOP MODULE PD100 SCREW PAN MECH M3*5 Ni EMI TAPE W30*L30mm PD120 Description Chapter 5...
  • Page 72 PD120 Assy Engine Module Exploded Parts List Item Part Number 70.82V27G001 70.82V12G001 85.1A123.050 41.82V02G001 Note: Please refer to RSPL for updated Part Number. Chapter 5 ASSY ENGINE BOTTOM COVER MODULE PD120 ASSY ENGINE TOP MODULE PD120 SCREW PAN MECH M3*5 Ni EMI TAPE W30*L30mm PD120 Description...
  • Page 73 PD100 Assy Engine Top Cover Module Exploded Parts List Item Part Number 11.009F0G005-C 23.82G01G002 48.859DMGD13 51.80B31G002 51.82V09G001 51.82V10G001 51.82G08G001 51.82G22G001 52.82G03G002 52.82G10G001 52.87130G001 52.87319G001 52.89627G002 61.80J48G002 61.82G02G001 61.83A03G001 61.88608G001 61.88611G001 61.89643G001 00.82V02G001 85.1A123.050 85.1A123.060 85.YA321G051 Note: Please refer to RSPL for updated Part Number.
  • Page 74 PD120 Assy Engine Top Cover Module Exploded Parts List Item Part Number 11.009F0G005 23.82G01G002 48.82GDMGD01 51.80B31G002 51.82V09G001 51.82V10G001 51.82G08G001 51.82G22G001 52.82G03G002 52.82G10G001 52.87130G001 52.87319G001 52.89627G002 61.80J48G002 61.82G02G001 61.83A03G001 61.88608G001 61.88611G001 61.89643G001 00.82V02G001-B 85.1A123.050 85.1A123.060 85.YA321G051 Note: Please refer to RSPL for updated Part Number. Chapter 5 CNNT F 166P FOR 0.55"...
  • Page 75 PD120 Assy Back Cover DC Module Exploded Parts List Item Part Number 51.82V12G001 51.82V21G001 41.82V12G001 51.82V04G011 Note: Please refer to RSPL for updated Part Number. BACK IR LENS PC PD120 BACK IO OVERLAY-DC PC PD120 EMI TAPE W41*L129mm PD120 BACK COVER-DC PC+ABS PD120 Description Chapter 5...
  • Page 76 PD100 Assy Back Cover DC Module Exploded Parts List Item Part Number 51.82V12G001 51.82V21G001 41.82V12G001 51.82V04G012 Note: Please refer to RSPL for updated Part Number. Chapter 5 BACK IR LENS PC PD120 BACK IO OVERLAY-DC PC PD120 EMI TAPE W41*L129mm PD120...
  • Page 77 35.82V01G002 35.82V03G001 52.82V11G001 51.82V22G001 Note: Please refer to RSPL for updated Part Number. FRONT COVER NORYL 9406P PD100 FRONT PUSH BUTTON PC+ABS PD100 FRONT IR LENS PC PD120 FRONT IR COVER RUBBER PD120 PCBA IR SENSOR BD FOR PD120 MODEL NAME LABEL PC PD100...
  • Page 78 PD120 Assy Blower Fan Module Exploded Parts List Item Part Number 49.83A01G001 52.82G08G001 Note: Please refer to RSPL for updated Part Number. Chapter 5 DELTA 4520 BLOW BLOWER 4520 RUBBER EP7190 Description...
  • Page 79 PD120 Assy Engine Bottom Cover Module Chapter 5...
  • Page 80 Exploded Parts List Item Part Number 23.82G02G001 23.82G06G001 23.82G10G001 23.82G20G001 23.82G20G011 43.80N01G001 51.82G13G001 52.82G04G002 52.82G09G001 52.82G12G001 52.82G13G001 52.82G14G001 61.82G03G001 61.82G11G001 51.82G25G001 61.82G19G001 61.82G21G001 61.82G22G001 70.82G15G001 70.83S05G001 75.82G08G001 85.0A122G030 85.1A123.050 85.1A523G080 Note: Please refer to RSPL for updated Part Number. Chapter 5 MIRROR WITH ONE COATING SURFACE ASPHERICAL ZEONEX RELAY LENS SQUARE UV-IR 17*17mm^2 T=2.75mm...
  • Page 81 PD120 Assy Lens Cap Module Exploded Parts List Item Part Number 52.82V01G001 61.82V08G001 51.83150G001 Note: Please refer to RSPL for updated Part Number. LENS COVER RUBBER PD120 LENS COVER PLATE PD120 CAP STRAP TDP-T90 Description Chapter 5...
  • Page 82 PD120 Assy LVPS Module Exploded Parts List Item Part Number 42.80S07G001 42.81G01.001 75.80W19G001 Note: Please refer to RSPL for updated Part Number. Chapter 5 W.A. 14P 190mm LVPS TO M/B TDP-T90 '' W.A. 2P #20 160mm LAPS/BALLAST H31 ASSY LVPS LITEON 200W 2300MP Description...
  • Page 83 PD100 Assy Lamp Cover Module Exploded Parts List Item Part Number 51.82V13G002 61.82V09G001 52.82V08G001 Note: Please refer to RSPL for updated Part Number. LAMP COVER NORYL 9406P PD100 LAMP COVER PLATE SPTE PD120 LAMP COVER SPONGE PD120 Description Chapter 5...
  • Page 84 PD120 Assy Lamp Cover Module Exploded Parts List Item Part Number 51.82V13G001 61.82V09G001 52.82V08G001 Note: Please refer to RSPL for updated Part Number. Chapter 5 LAMP COVER NORYL 9406P PD120 LAMP COVER PLATE SPTE PD120 LAMP COVER SPONGE PD120 Description...
  • Page 85 PD120 Assy Elevator Module Exploded Parts List Item Part Number 51.82V06G001 51.82V07G001 51.86809.001 61.86814.001 61.85913.001 Note: Please refer to RSPL for updated Part Number. ELEVATOR HOLDER PC+ABS PD120 ELEVATOR PUSH PC+ABS PD120 ELEVATOR BODY NYLON+GF DP725 ELEVATOR EXTEND SPRING DP725 ELEVATOR SPRING SUS304 SB21 Description Chapter 5...

  • Page 86: Appendix Serial Number Definition System

    Serial Number Definition System I. Serial Number System Definition Serial No. (Acer Barcode rule), 22 digits (Barcode Type: Code 128) PPPPPPPPPPWWWSSSSSMMEE The coding rule of the Bard Code: (1) PPPPPPPPPP (10 digitals) : Part Number excluded “dot” Ex: EY.J1401.001. (2) WWW (3 digitals) : Week Code The first digit is the last letter of the year;...

  • Page 87: Ii. Pcba Code Definition

    II. PCBA Code Definition PCBA Code for Projector A B XXXXXXXXXX C XXX EEEE Vendor Code Revision Date Code C: M/B B: DMD/ B Appendix...

  • Page 88: Iii. The Different Parts Between Pd100 And Pd120

    III. The Different Parts between PD100 and PD120 Ver. 48.859DMGD13 A DMD 800*600 PIXEL DDR FTP 0.55 48.82GDMGD01 A DMD 1024*768 PIXEL DDR FTP 0.5 51.82V02G002 BOTTOM COVER PC+ABS PD100 51.82V02G001 BOTTOM COVER PC+ABS PD120 80.82V51G001 PCBA MAIN BD PD100 80.82V01G001...

This manual is also suitable for:

Pd120

Table of Contents