Table of Contents
Quick Links
en
Operation
GB
F
Keypad and control elements
I
1 On/Set key
2 Pulse key
E
3 Lock switch
P
NL
Display
DK
4 Locked
S
5 Laser active
N
6 Pulse/Power save mode ON
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
Operation
M
TR
5
1
4
Switching on/off
•
ON: Briefly press the On/Set key 1.
•
OFF: Press and hold down the On/Set key 1.
Laser functions
Pressing the On/Set key 1 activates the following laser
functions:
Action
not in Lock mode
1x
2x
only vertical line
3x
4x
3
5x
all lines and points
6x
2
2x
4x
1x
3x
SK103P
in Lock mode
only
horizontal line
horizontal line
only vertical line
horizontal and
again as 1x
vertical line
all points
again as 1x
Makita SK103P
2
5x
6
only
–
–
–
Table of Contents
Related Manuals for Makita SK103PZ
Summary of Contents for Makita SK103PZ
- Page 1 Lock mode in Lock mode only only horizontal line horizontal line only vertical line only vertical line horizontal and again as 1x vertical line all points – all lines and points – again as 1x – Operation Makita SK103P...
- Page 2 Turn the Lock switch 3 in order to transport or tilt the laser beam in Pulse mode, even over long distances. instrument beyond the self-levelling range. When locked, the pendulum is fixed and the self-levelling (Laser detector refer to accessories) function is deactivated. Transportation and lock Self levelling Makita SK103P Operation...
- Page 3 Applications SK103P Receiver available accessory. Operation Makita SK103P...
- Page 4 How to use the wall mount bracket: Makita SK103P Operation...
-
Page 5: Checking The Accuracy
A (-> A1). Rotate the instrument by 180° and mark the horizontal laser line or the laser dot in exactly the same way on wall B (-> B1). Operation Makita SK103P... - Page 6 If the difference does not exceed 3 mm, off the maximum deviation of the laser line from the top of the then the SK103P is within tolerance. plumb line. If the difference does not exceed 2 mm, then the SK103P is within tolerance. Makita SK103P Operation...
-
Page 7: Display Notices
To safely transport the instrument, set the Lock switch 3 to Rotate the instrument by 180° so that it points in the opposite "Locked" ( direction 2 to direction 1. Adjust the instrument so that the Care and advice on operation Makita SK103P... - Page 8 Dimensions (H x D x W) 4.25 x 4.6 x 2.83 in Weight without batteries 470 g Weight without batteries 16.6 oz Tripod thread 1/4" Tripod thread 1/4" * depending on lighting conditions * depending on lighting conditions Makita SK103P Technical data SK103P...
-
Page 9: Safety Instructions
Internet: www.makita.com (for short Makita): • Projection of horizontal and vertical laser lines and • Makita is responsible for supplying the device, including laser dots the User Manual, in a completely safe condition. • Makita is not responsible for third party accessories. -
Page 10: Hazards In Use
• To be familiar with local safety regulations relating to thorised personnel. accident prevention. WARNING Using a battery charger not recommended by Makita Hazards in use can destroy the batteries. This can cause fire or explosions. CAUTION: Precautions: Only use chargers recommended by Makita to charge Watch out for erroneous measurements if the the batteries. - Page 11 • Consult the dealer or an experienced radio/TV tech- nician for help WARNING: Changes or modifications not expressly approved by Makita for compliance could void the user’s authority to operate the equipment. Safety instructions Makita SK103P...
-
Page 12: Laser Classification
Pulse repetition frequency, PRF 10 kHz, cw Pulse duration 50 µs Beam divergence line 180° × 0.1° Beam divergence point < 1.5 mrad It is a Class 2 laser product in accordance with: • IEC60825-1: 2014 "Radiation safety of laser prod- ucts" Makita SK103P Safety instructions...